UCS Manager - internal backup system failed [WSF: FAILURE]

Similar Questions

• Backup system failed

  I used standyby for years.  Suddenly, last night, it wouldn't go into sleep mode.

  Instead, I got this error message: "failure of the standby system - is the device driver for the 'HID compatible mouse' prevents the computer enter standby.»  Please close all applications and try again.  If the problem persists, you may need to update this driver. »

  Mine is optical mouse Microsoft 1. 0a.  I searched through to:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=OEM&type=mouse&name=P58-00022&OS=XP_32&lang=0

  How will I know if mine is a system of 32 or 64 bit?

  And I'm on the right track?

  Assume Windows XP-

  To find out if you have a 32-bit (x 86) system-
  Click Start, select run, now type: msinfo32

  You will see under System Type.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• System Image backup has failed during the backup

  I have a 2 years old HP pavilion g series notebook.  I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
  My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used.  I need to know there is a way to save what I saved and restart the backup of the Image where it left off?
  
  Product: A6Z59UA #ABA
  Model: g61d60us

  Hi CherylLyme,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003).  Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)

  I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup.  The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them.  You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store.  If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.

  You can probably buy an external drive for on the cost of the replacement of disks.  Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few.  I hope this helps.

• Error "failure 0x8000FFFF catastrophic" when running on Vista computer backup system

  Original title: you try to run the backup.
  You save stopped running, catastrophic failure 0x8000FFF error message.

  Hello

  This problem occurs because the backup process detects that the system drive is dirty.
  Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive.
  and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.

  Refer to this article and follow the steps to solve the problem:

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)":
  http://support.Microsoft.com/kb/973558

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• / pps/system/development/control failure 500: development has failed

  Hi, I have the latest version of the native sdk and wanted to use stunts.

  I started a new application and choose the Hello World project.

  now, I wanted to deploy it on my dev alpha, but I still have these messages:

  / pps/system/development/control failure 500: development has failed

  How to solve this problem?

  Have you tried to reboot the device? Or not it fails again on your first attempt after a reboot?

• Failure of backup system image 0 x 8007003

  I tried to back up my system drive, but suddenly everything back up he stuffed me an error...

  Backup Failed: System image backup 0 x 8007003

  Please help me in this regard...!

  Hi Natasha,.

  Thanks for posting your question in the Microsoft Community Forums.

  According the description, I understand that you are trying to back up the system drive and you get an error: failed to backup system image 0 x 8007003.  Please don't worry. I'll help you with this problem.

  You use a third-party backup software?

  You can follow the steps in this article and check if it helps:
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455

  Get back to us with more information after the completion of these steps and let us know the result and I'll be happy to help you.

• Windows 7 Ultimate 64-bit hangs during antivirus and backup system analysis

  I have problems with my PC. Last night, before retiring for the night, I noticed that Microsoft Security Essentials icon is yellow and warning me that my computer was in danger and had not been scanned for viruses for awhile. Normally it is set to run automatically on a schedule, but it does not work if my computer is set to go to sleep after a period of inactivity (which is because I want to save energy). So I have to manually run the virus scan. I have it set to run a FULL scan and then went to bed. In the morning, I noticed that my computer has been completely closed. It would normally be asleep and she simply by moving my mouse wake up. I had to hit the power button on my PC to start upward. The warning message that Windows did not close properly displayed and gave me the boot options. I just booted normally. As the virus scan has been the last thing my computer did the night before, I decided to try to run a FULL scan again. It crashed my PC. I started again and tried a QUICK analysis, which worked well. I searched "Microsoft Security Essentials plant system" and found a recent instance with someone else, and after more detailed diagnosis, they determined that it was probably a failing hard drive or a bad memory. The recommendation was immediately back up their system of hard drive and replace it.

  Before you run any Diagnostics to determine my culprit, I decided to start a backup system just to be safe. I ran Windows Backup and choose "Create a system image" and he has done on an external hard drive on a USB3 docking station. He got about 90% through the backup, then my system crashed. No error message, just a full stop.

  Unfortunately, a not save the link to the original set of instructions to diagnose why the system crashed during the anti-virus scan.

  Now I ask... What can I do to save my system if it crashes my computer?

  Hi Greg,.

  Thanks for posting your query in Microsoft Community.

  I understand that the system hangs when a complete analysis of how MSE or backup system and I'll be happy to answer your query. This could be due to MSE not updated and that's why he showed the yellow icon. We will try the following methods and check.

  Method 1: Microsoft Security Essentials (MSE) update

  For update to MSE, please see: How to manually download the latest Microsoft Security Essentials definition updates

  Here are some methods that you can try in order to solve the problem.

  Method 1: Perform the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 2: Clean boot material and check.

  a. go to Start and type Device Manager in the start search field.
  b. type Device Managerand select Device Manager from the list programs.
  c. right click on the sound card, video card and NIC, one by one, then click on disable.
  c. restart the computer.

  If it solves your problem, allow hardware devices that in time to find the exact device originally this problem. After you find the device that causes the problem you can solve by installing the latest driver or replacement of the device.

  Method 3: Do restore the system from the Windows recovery environment and verify.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• Error messages from backup system «Ox8078014B and Ox80070570»

  When you try to back up my Windows 10 System I get error 'Ox8078014B and Ox80070570' messages and backup fails?  What can I do?

  What was your original system before the upgrade to 7,8,8.1?

  I got 8.1, I had to ride to 8.1 and rerun the original disc of windows with the number of keys licensen orginal about 3 times between each time I have ried to run a restore of the system backup image wouldn't he kept re-run the orginal disjk I'm sinking read the files and they were loading whenever it took over time than before so I know it sis not completely load , then after I tried to the 8.1, he would go to a full backup and a system image restore complete on my external hard drive that you have well connectioned before running any backup or system restore image failure, when I sent to OS10 the first time I tried it, I put the disk in a roll it back to 8.1 revive the disc loaded file restery missing only restored what was need to operstr the computer, and then upgraded to OS 10 ran the file history upward and the image restore system disk WD 2 TB external and before doing that I went to the store windows, they have files for a kit of 5 tools to download OS 10 repair no problems.

  If it will not be restored in windows 7 pro, 8 or 8.1 I'll carry back to people u bought it, you have a faulty drive or a bad hard drive that not having not the windows registry file is AFAIK what elses maybe wrong, but Microsoft won't help

• 6120 link down on mgmt0 triggers not UCS Manager failover cluster - is?

  Hello friends

  We have recently installed a cluster consisting of two 6120 UCS s configured for HA. When executing fail during test cases, we removed the network cable in mgmt0 on 6120 elementary. Immediately the cluster IP address is not responding ping (as expected) and we lost connectivity to the UCS Manager GUI (also as expected.) At one point, however, we expected the 6120 subordinate to detect that this link was down and launch a failure over the UCS. This is not moved after 20 minutes of waiting.

  My questions are the following:

  1. Is this expected behavior?
  2. If this is not the case, what should us review to ensure that failover occurs in the future?

  I know we can force a failover of the subordinate by issuing a command to the main cluster of local-mgmt but would be interested to see if it should be automatically produced on the failure of primary mgmt0 binding.

  Thank you for your time.

  Configured by default which is the expected behavior.

  You can configure management interface and failover if the management interface loses connectivity such as your test scenario.  That's what you're looking for.

  Admin - Communication Management - Management Interfaces - Management Interface tab strategy control tab.

  

  Kind regards

  Robert

• UCS Manager 2.2 - LDAP authentication

  Hello

  I have some general questions about authentication LDAP and UCS Manager.

  I hope it's unterstandable...

  We have the following structure:

  • DC = Company.domain.com
    • OU = Domain Administration
      • OU =Administrators
        • UO = Germany
          • CN = User1-SMA
          • CN = SMA-user2
      • OU = Test-UO
        • CN = ucstestuser
        • CN = ucsadmingroup--> Member = SMA-user1, user2-SMA
          

  I added an LDAP provider

  binduser is the SMA-User1

  Base DN = OU = Domain Administration, DC = company, DC = domain, DC = com

  attribute = empty

  filter = sAMAccountName = $userid

  password for User1 SMA

  group permission / recursive enabled.

  I have not add some attributes or map the group. Now I can connect with ucstestuser (read-only), but not with SMA-user1 user2 SMA oder.

  If I add ucstestuser to ucsadmingroup a map of this group, ucstestuser can access and have right to admin, ADM-user1 and user2-adm cannot access (user authentication failed).

  I don't understand, why ucstestuser can access and other users in a different OU not. Unique database name is domain Administration, so that UCSM should see all three users, not?

  Can anyone help? Thank you.

  / Danny

  With UCS remote authentication when a user connects using a temporary account on the FI as a UCS-MyAuthDomain\myusername, which is limited to a total of 32 characters.  If you shorten the name of domain authentication defined in UCSM domain.com to a shorter name as AD, it will allow for the use of a username any longer.

  Note

  For systems using the remote authentication protocol, the authentication domain name is considered to be part of the user name and the limit of 32 characters for usernames created locally. Because Cisco UCS inserts 5-character formatting, the authentication will fail if the name and the user character domain name combined total is greater than 27.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config/Guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_1_chapter_01000.html

• Recover lost File_Access backup system

  XP Home Edition: I don't have to re-record a word file I did hours of changes to, but even since I took my computer in for repairs that I got this message that floats to the top and told me I did a backup system. I can't understand how access only. Suggestions? Thank you!

  Assuming that someone set up backup NT to do something for you without your knowledge * and * they chose to save more than just the State of the system * and * you saved the file you want to recover in the State you want to recover in to one of these backups occurred * and * there was enough space (or pension) not to crush the last backup with a new one that occurred after the backup that you really want) If it exists) has been done...

  Click on start--> all programs--> Accessories--> System--> Backup Tools. The wizard backup or restore starts. Click "Advanced Mode". Click on the tab "restore and manage the media.

  If you want to restore from a backup file, expand file, and then the file backup that you want. For example, expand Sauveg.bkf created on 02/09/2011 at 13:15 backup includes the date and time of the backup as part of the default file name.

  Select the check boxes for the folders you want to restore. If you want to be more specific in your selections, double-click the folder you want, and then select the check boxes for the files or folders you want to restore.

  In the restore from box files, use one of the following steps:

  If you want to restore the files to the location where you saved the, click original location. Use this selection when you restore the entire computer.

  If you want to restore one or more files to another location on the hard drive, click on another location. Type the location in the location box. Use this selection to prevent the restore operation to overwrite existing files on your computer.

  If you want to restore one or more files in a single folder on the hard disk, click single folder. Type the location in the location box. This selection allows to separate from the rest of the files on the hard drive the restored files or folders. On the Tools menu, click Options.

  Click the backup method to use when it restores a file that is already on the computer, and then click OK. Backup uses this selection to determine whether to replace an existing file only when it restores a file in a folder that contains the existing file. Click Start Restore.

  In the restore confirmation prompt that appears, click OK. A restore in progress dialog box appears, and the restore operation starts. When the restore process is complete, click Close. If you are prompted to restart the computer, click Yes.

  That is based on certain important assumptions that point to the fact that you should probably configure your own backups that you understand and control.

• Ping the loopback interface fails - general failure - all windows 7 Networking fails

  Hello, I am looking for advice on the following question:

  1 ping the loopback interface fails general failure - ping 127.0.0.1-
  2 netsh winsock reset - does not work - the system cannot find the specified file
  3. the wireless interface detects the network but remains in limited access and never receives any dhcp server ip address, other wireless devices work correctly.

  Hello

  I suggest you follow the steps below:

  Method 1:

  a. click on Start -> all programs -> Accessories

  b. right-click on command prompt and select run as administrator.

  c. type ipconfig/flushdns and enter.

  Method 2:

  Reset internet protocol follow the steps described in the article below:

  http://support.Microsoft.com/kb/299357

  Method 3:

  If the steps above fail, follow the steps in the link below:

  http://TechNet.Microsoft.com/en-us/library/cc757819 (WS.10) .aspx

  I hope this helps.

• Map system PS1 PG failure of voltage is outside the range

  System model PowerEdge R720

  Revision of the system I have
  BIOS version
  1.6.0
  Firmware version
  1.40.40 (build 17)
  The lifecycle controller firmware
  1.1.5.165
  Version of the Firmware IDSDM
  N/A

   

   

  JOURNAL OF THE IDRAC

  Map system PS1 PG failure of voltage is outside the range.

  The food temperature 1 is outside the range.
  Power supply 1: status = 0x200c, IOUT = 0 x 0, VOUT = 0 x 0, TEMP = 0xc0, FAN = 0 0 x, ENTRANCE = 0 x 30
  Power supply 1 is operating normally.

  Tensions

  System Board PS1 PG Fail

  power configuration ,

  No redundant Reduncancy

  primary 1st turn on hot spare

  Thus,.

  -7/24 job server, can I fix this without stopping.

  -Power to POWER block? What should be the configuration of redundancy?

  Kind regards.

  NikolaTesla,

  If the power supply is switchable redundant power supplies hot, you can remove and replace the PS1 while the server is online.

  I suggest also, as best as possible, to plan downtime, update the current server.

  I see you're a few updates on BIOS, iDrac, as well as the lifecycle controller. Now with the BIOS and iDrac being 4 updates back, I suggest clicking on 'Other Versions' on these pages and updates up to current walk.

  Let me know if it helps.

• I have just updated to Windows 7 and when I try to run a backup they fail.

  I have just updated to Windows 7 and when I try to run a backup they fail.  It seems that whenever a program tries to update the external HARD disk where backups reside it requires administrator permissions.

  Looking at the options Microsoft suggest that their user account control system is not supported by my version of SyncToy. What can I do? I'm looged administrator

  As you have installed SyncToy until you have created the required permissions, uninstall SyncToy, reboot, then reinstall SyncToy.