UDLM rac-udlm-rs by failing to get online
Hi all
I will put up a zonecluster that will run CARS. We're fine, until the point where, using clsetup, I try to create the rac-framework-rg (and associated rac-udlm-rs, rac-framework-rs).
In trying to create the resourcegroup, rac-udlm-r fails to get in line, causing the rest of the framework to fail.
The error in the log file for UDLM (/ var/cluster/ucmm/dlm_ < area > /logs/dlm.log is:)
CONNECTION ERROR: "Invalid Argument", family = 0, port = 6009, in is 0.0.0.0
This repeat 5 times per second on both nodes of zonecluster. regularly, the Exchange port error (i.e. it runs through the ports).
I tried to rebuild the zonecluster, nothing helped. I'm at a loss as to what could be the error, or where to start the search, since there is no evidence that anyone has ever hit this error before.
Any suggestions on where to look and what I can try to solve this problem is will be appreciated.
Possibly related, or even the cause, is that the zonecluster has been configured with:
Add net
Address = xxx.xxx.xxx.xxx
end
at the zonecluster level, but these addresses are not appear under "ifconfig - a". Maybe I'm misunderstanding how they are used, and when they should appear however.
A few notes:
the zonecluster in all other respects seems fine - I QFS configured resources and these seem to work correctly in all circumstances.
the ORCLudlm, the package is installed (the one which comes with Oracle 11.2.0.3)
Right, in case it helps someone else in the future:
I found the problem. In a zonecluster of work fully setup the /etc/nsswitch.conf file includes these lines:
hosts: files of cluster
netmasks: files of cluster
but in the sad, sad, interest on the system, I was setting up this file was:
hosts: files
netmasks: files
and you know what, this allows you to go:
Ping Clusternode1-priv
and he searches and resolves correctly. Now, if this does not properly, essentially the demon UDLM cannot communicate with other nodes in the cluster, because he must do a search of nameserver on Clusternode1-priv internally.
So basically, make sure that your file nsswitch.conf looks up in the cluster first for host name searches.
This problem occurs if you do a traceroute on the IP address of the other node of the cluster (from one of the nodes zonecluster) using private address IP interconnection. In a system that works, it will show the name (Clusternode1-SP). In a non-working system, it only shows the period of INVESTIGATION.
Tags: Database
Similar Questions
-
CARS: 2 nodes with Oracle single Client Access name (SCAN)
OS: OEL 5.4 64-bit
Version: 11.2.0.3
When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).
servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))
serviceBD service
SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;
METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS
---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----
serviceBD BASIC SELECT 180 NO LONG YES
But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
Or
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
I have also observed the following (cluvfy).
1 all LISTENER_SCAN running node 1
2 there is no TCP connectivity
3 the error message is obtained PRVF-5713
[grid@rac1 ~] comp cluvfy $ scan - verbose
Check scan
Checking the single Client access name (SCAN)...
ANALYZE the running node name? ListenerName Port running?
---------------- ------------ ------------ ------------ ------------ ------------
scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1
Checking TCP connectivity to ANALYZE listeners...
Node of ListenerName TCP connectivity?
------------ ------------------------ ------------------------
RAC1 LISTENER_SCAN1 no
RAC1 LISTENER_SCAN2 no
RAC1 LISTENER_SCAN3 no
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
Check the resolution settings of name to 'scanvip.domain1.local '...
SCAN the IP address status comment name
------------ ------------------------ ------------------------ ----------
scanvip.Domain1.local 10.210.2.18 spent
scanvip.Domain1.local 10.210.2.19 spent
scanvip.Domain1.local 10.210.2.17 spent
Verification of the installation program ANALYZES VIP and the listener has failed
The analysis check failed on all specified nodes.
Could someone help me please.
The solution was to restart scan_listener.
srvctl stop scan_listener
srvctl start scan_listener
-
Failed to get the status of printer/bizhub Konica Minolta C654e
Failed to get the status of printer/bizhub Konica Minolta C654e
Cannot print from my Mac.
With the limited information you supplied I would check the configuration of the print queue. If you open information system (located under Applications > utilities), you will see a column on the left and if you select printers the right pane displays the print queue information. Note If you have multiple printers, you can select in the right upper pane to view its information in the bottom right pane. Can you copy this information and paste it here.
-
He fails to get firefox on an ipad 2 (full screen)?
He fails to get firefox as an application on an ipad 2 (full screen)?
Apple restrictions prevent us from distributing Firefox for iOS (iPhone, iPad, iPod Touch) devices. But you can install Firefox Home, a free application that allows you to access your Firefox tabs desktop, Favorites and history on your iPhone, iPad or iPod touch.
-
AppleScript Error-1728 - failed to get document 1
I'm trying to find out why my AppleScripts I use for automation of numbers do not work this month.
I have several scripts that I built for the treatment of the expenditure reports and I ran them last time in February with no problems. Whenever I now them I get the following error message:
error "Numbers had an error: failed to get document 1." the document number-1728 1
I looked at this post: https://discussions.apple.com/message/29854515#29854515
I have not found the cache file listed in the directory of ~/Library/Caches... ask yourself where the hell numbers may be sticking this file in order to remove it and see if this solves my problem.
All I have this problem or knows where I could find the file cache for numbers?
Thank you
Rich
To solve this problem...
I had to remove the container file to ~/Library/Containers/com.apple.iWork.Numbers and my scripts are back and working again!
-
Satellite P100 - 307 Error Message: "failed to get read handle.
"Failed to get read handle." Error message that appears whenever I start my laptop. HELP, its boring
Error message that reads "Failed to get read handle." lies at the heart of my screen. Strange that it has an OK button, which means that the computer expects me to think it's ok. It's like the 'So what' button which really did not help them that my computer failed to get read manages? How can I get rid of this message? And why he's here.
It's like setting up a new cell phone and the first time you receive your new number to a text message comes on the screen saying "Otta OK." Who the hell is Otta and what was wrong with Otta initially. In any case, anyone could help me with this, I would of course welcome.
Hi Thorsten
My first question is; What to hell you have on your laptop?
I never saw the message as "Failed to get read handle."
I have goggled autour and nothing!Are you able to get into the operating system? O If yes try to restore the operating system to the beginning.
I put t know what you have installed or not installed on the device but I can t believe this is happening without any reason. -
Tecra M5 fails to get an IP with the Orange Livebox
I have a new Toshiba Tecra M5 notebook.
When I try to connect to my Orange Livebox wireless, he manages to connect but fails to get an IP address.
I spent the days to try.I followed previous assignments on it, but no one seems to have posted a definitive answer. I tried update driver lan wireless etc but got nowhere.
Someone please help before I go nuts.
and check if the new version of the driver Wlan is available to use the Intel 2200 b/g card and this work after driver update
-
New configured vlan4 failed to get the IP address of our ad server
Any guy who can help me: due to the expansion of network, I need allocate a new subnet 192.168.4.0 on our lan co. existing, 3 private LAN 192.168.1.0 (primary, all related Windows AD server and internet devices). 192.168.2.0 and 3.0 are Department LAN for user workstations. All desktop user on all the networks had the host Windows AD 192.168.1.20 IP. I used a new switch 6249 dell to configure a new VLAN 192.168.4.0, but user on this network failed to get IP of the host of the AD. Could someone give advice? Console > console en #show run! Current configuration:! Description of the system "PowerConnect 6248, 3.3.10.3, VxWorks 6.5! Version of the system 3.3.10.3 software! Passage mode is configured as disabled! Configure the vlan database vlan 4 vlan routing 4 1 output battery 1 2 Member out ip address 192.168.1.221 255.255.255.0 ip default-gateway 192.168.1.1 no ipv6 do enable the interface vlan 4 routing ip address 192.168.4.22 255.255.255.0 ip helper-address 192.168.1.20 ip 192.168.1.20 domain helper-address dhcp ip mtu 1500 output user name 'admin' password level 15 dhcp 0192023a7bbd73250516f069df18b500 encrypted l2relay dhcp l2relay vlan 4! interface ethernet 1/g13 switchport access vlan 4 output! interface ethernet 1/g14 switchport access vlan 4 output! interface ethernet 1/g15 switchport access vlan 4 output! interface ethernet 1/g16 switchport access vlan 4 output! interface switchport ethernet 1/g17 access vlan 4 output! interface ethernet 1/g18 switchport access vlan 4 output! interface ethernet 1/g19 switchport access vlan 4 output! interface ethernet 1/g20 switchport access vlan 4 output! interface ethernet 1/g21 switchport access vlan 4 output! interface ethernet 1/g22 switchport access vlan 4 output! interface ethernet 1/g23 switchport access vlan 4 output! interface ethernet 1/g24 switchport access vlan 4 Server snmp community public rw to exit
Remove the routing of the 6248
Delete the IP address that you assigned to 4 VLAN on the 6248
On the S5624P create VLAN 4 and assign an IP address
On the S5624P implementation of the programme of assistance to point to the address DHCP IP
Make sure that the S5624P performs the routing VLAN.
-
Failed to get component of the arbitrator
When I click on Viewer call in the warehouse of cisco unity tool, I get the following error... Failed to get component of the arbitrator... any thoughts
The connected account is associated with any subscriber?
Try UnityInstall
-
response of psr tmadmin: failed to get a temporary file for writing
Hello
I have a problem with my local Tuxedo instalation. My servers and services works fine but when I try to list them using psr (printserver) or printclient tmadmin response: pg: failed to get a temporary file for writing. Can you tell me where can I find the possible cause?
Thank you,.
main problem was no space in /var. thank you for your help.
-
whenever I run this code I get this error
SQL Error: ORA-30926: failed to get a stable set of rows in the source tables
30926 00000 - "impossible to get a stable set of rows in the source tables.
* Cause: A stable set of rows could not be achieved due to the large dml
activity or one not deterministic where clause.
* Action: Remove any non deterministic of the clauses and reissue of the dml.
Don't know wht goes wrong!
SQL:
MERGE IN VENDORS_ACTIVE_DATE s
USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,
NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.
(case when ((d.VENDOR = s.VENDOR) and (d.COMPANY_CODE = s.COMPANY_CODE)))
)
then "MATCH".
When d.COMPANY_CODE is null
then 'DELETE '.
When s.COMPANY_CODE is null
then "INSERT."
else 'UPDATE '.
chck end)
from (select * from VENDORS_ACTIVE_DATE where COMPANY_CODE = 2) s
full outer join (select * provider where COMPANY_CODE = 2) d
on (d.COMPANY_CODE = s.COMPANY_CODE AND s.COMPANY_CODE = 2)
) d
WE (d.COMPANY_CODE = s.COMPANY_CODE AND d.chck in ('UPDATE', 'GAME', 'DELETE'))
WHEN MATCHED THEN
UPDATE SET s.VENDOR = d.VENDOR
WHERE d.chck in ('UPDATE', 'DELETE')
DELETE WHERE d.chck = 'DELETE '.
WHEN NOT MATCHED THEN
INSERT (SELLER, COMPANY_CODE)
VALUES (d.VENDOR, d.COMPANY_CODE)
Work request: (deleted the duplicate data in tables (source and target))
MERGE IN VENDORS_ACTIVE_DATE s
USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,
NVL (d.ACTIVEDATE, s.ACTIVEDATE) ACTIVEDATE.
NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.
(case when ((d.VENDOR = s.VENDOR))
- AND D.ACTIVEDATE = S.ACTIVEDATE
and NVL (d.ACTIVEDATE, trunc (sysdate)) = NVL (s.ACTIVEDATE, trunc (sysdate))
and (d.COMPANY_CODE = s.COMPANY_CODE)
)
then "MATCH".
When d.COMPANY_CODE is null
then 'DELETE '.
When s.COMPANY_CODE is null
then "INSERT."
else 'UPDATE '.
chck end)
from (select * from suppliers where COMPANY_CODE = 2) d
full outer join (select * from vendors_active_date where COMPANY_CODE = 2) s
on (d.COMPANY_CODE = s.COMPANY_CODE and s.vendor = d.vendor)
) d
WE (d.COMPANY_CODE = s.COMPANY_CODE AND d.VENDOR = s.VENDOR AND d.chck in ('UPDATE', 'GAME', 'DELETE'))
WHEN MATCHED THEN
S.ACTIVEDATE = UPDATE SET d.ACTIVEDATE
WHERE d.chck in ('UPDATE', 'DELETE')
DELETE WHERE d.chck = 'DELETE '.
WHEN NOT MATCHED THEN
INSERT (VENDOR, ACTIVEDATE, COMPANY_CODE)
VALUES (d.VENDOR, d.ACTIVEDATE, d.COMPANY_CODE)
-
FUSION IN: ORA-30926: failed to get a stable set of rows in the source tables
Hi all
Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production 0
PL/SQL Release 12.1.0.1.0 - Production 0
CORE 12.1.0.1.0 Production 0
AMT for 64-bit Windows: Version 12.1.0.1.0 - Production 0
NLSRTL Version 12.1.0.1.0 - Production 0
When you use the MERGE clause, if executed more than once, I get the below error
ORA-30926: failed to get a stable set of rows in the source tables
create table CBC (nums number, sname varchar2 (10))
create tar (tnum number, tNom varchar2 (10)) table
Insert in src values (1, 'a')
Insert in src values (1, 'b')
Insert in src values (2, "c")
merge into tar
using the CBC
on (nums = tnum)
when matched
then
update the value tNom = sname
When not matched
then
Insert the values(snum,sname);
What expect, it's that first time itself (when inserted), he must raise the error. But it's not.
Select * from tar
TNUM TNOM
1 b
1 a
2 c
But if we run for the second time it shows the error.
I saw the document of the Oracle and he said
MERGE
is a deterministic statement. You cannot update the same row in the target table multiple times in the sameMERGE
statement.I've seen below cela son but failed to get the solution for this.
Someone at - it make a clarification?
I don't want to insert records into the first time itself. for example, to run the first time he must raise the error. can I do this using MERGE?
Thank you
Hello
O - O wrote:
Thanks knani, Frank.
One more doubt.
When you run the MERGE statement, the first time, there is no rows in the target table, so no rows in the target table is what it is.
So we cannot perform below sqls using MERGE when the target table is empty?
insert into tar values (1, 'a')
updated tar tNom = 'b' set where tnum = 1
insert into tar values (2, "c")
Is - that means that the MERGER will be only works with validated data?
Right; a MERGE statement will not update a line which has been previously inserted into the same MERGE statement. All fact tables reference to the data in the tables by the time the MERGER began.
-
XPathFunctionException: Failed to get the metadata for DVM Manager
Hello
I tried yo use dvm in a BPM process. I created the digital Voltmeter with the jdeveloper Wizard, then I tried to use it in a window of data binding.
The expression
DVM:lookupValue ("oramds: / apps/SOA/DVM/stato.dvm','domainBPEL',string (bpmn:getDataOutput('outputVar') / ns:Esito),"domainBPM","err"")
raise during execution of this exception:
The XPath expression cannot run; the reason was: oracle.fabric.common.xml.xpath.XPathFunctionException: failed to get metadata for DVM 'oramds:/apps/SOA/DVM/stato.dvm' Manager
Please make sure that the metadata Manager is available...
Any idea what goes wrong?
The name of the dvm is stato.dvm and here is the content:
<? XML version = "1.0" encoding = "UTF-8"? >
<!-generated by Publisher DVM Oracle version 1.0 to [24/02/15 12.28]. ->
" < name dvm ="stato"xmlns =" http://xmlns.Oracle.com/DVM "> "
< description > < / description >
< columns >
< column name = "dominioBPEL" / >
< column name = "dominioBPM" / >
< / columns >
< lines >
< row >
< cell > 1 < / cell >
cell <>err < / cell >
< / row >
< row >
< cell > 2 < / cell >
<>vt cell < / cell >
< / row >
< row >
< cell > 3 < / cell >
Sosp < cell > < / cell >
< / row >
< row >
< cell > 0 < / cell >
< cell > OK < / cell >
< / row >
< / rows >
< / dvm >
Hi Clarec,
It is a known issue in 12 c.
Oracle has released a fix for this. You must download and install the patch 19554282.
Antonis
-
I use D:\MessageQueue4_5\mq\bin\imqcmd.exe to get heads of JMS queues. In most of the facilities, I can retrieve the results without problem.
At a single facility, however, I get an error when you try to run this command. Called with no arguments, it should display a list of available commands. But that's what I get instead:
D:\utilities\imqChk > d:\MessageQueue4_5\mq\bin\imqcmd.exe
Boot process failed.
Could not run
Java
-cp
d:\MessageQueue4_5\mq\lib\imqadmin.jar;
d:\MessageQueue4_5\mq\lib\fscontext.jar
-Dimq.home=d:\MessageQueue4_5\mq
-Dimq.etchome=d:\MessageQueue4_5\mq\... \etc\mq
com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.
Other info:
- Java is installed (version 1.7.0_17).
- QBrowser using, I can sign in successfully and retrieve information from queue.
- All of the named files and jar files are where they are supposed to be within the meaning of the doce above.
I was not able to locate the source of the problem. Any ideas would be greatly appreciated.
Thank you.
I had this same problem and solved by editing the file \glassfish3\mq\etc\imqenv.conf manually by setting IMQ_DEFAULT_JAVAHOME as follows:
IMQ_DEFAULT_JAVAHOME = / Files/Java/jdk1.7.0_45 program
Note the orientation of the slash. It's on Windows, and when I used with Windows style slash escape sequence, it does not solve this problem only when I used the mangled Unix style done.
Hope this helps,
-Noah
-
I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error. Googling everything nothing helped, so I'm here. Error:
Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.
Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.
The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.
Ideas?
Thank you.
Find the esx.conf file in/etc/vmware.
If you could also share a copy with me...
Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name
Check the link as well below.
Maybe you are looking for
-
Any iTunes library appears in Apple music
Forgive me for being prolific; I'm going to do my best to explain the problem I have. I just downloaded the beta version of iOS 10 and now my iTunes library all - playlists, artists, songs, everything - no appears in the library of my phone in the mu
-
Toshiba 23EL933 read MKV files
HelloThree days ago, I bought a TV from 23EL933 on Amazon.fr.I tried to play a MKV file, but it does not work: the film seems to start but after a second, stop the file and I go back to the root of my USB.Is the defective TV? What I send back to Amaz
-
A scheduled script does not run correctly
I have a .vbs script that I want to run every day. The script must be running a 3rd party application that will back up a SQL Server Express database to a flat file of data archiving and restore if necessary. If I click on the script, that it works p
-
Driver HP Pavilion G6 Wi - Fi...
Hello I need to know where to find the driver WiFi for my HP Pavilion G6. Network controller hardware ID: PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01 PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C PCI\VEN_168C & DEV_0032 & CC_028000 PCI\VEN_168C &
-
AO532h e-recovery - backup file not found
AO532h (Win 7) e-recovery successful (better than ever). One works a program to find the backup files "before recovery? This file was new in... C:/backup/public/.../log/channel.ini: [PATH OF LOG]C:\Users\Public\OEM\Acer VCM\Log[UDP ONLY]OFF[LOG LEVEL