Uk Pavilion P6-2380ea version

Similar Questions

• How to access the BIOS Setup - Pavilion P6650z, BIOS Version 6.04

  I have a 2 years, Pavilion P6650z, BIOS Version 6.04, AMD Athlon II 250 dual-core processor. Using Microsoft havdetectiontool, I checked the processor is capable of virtualization hardware-so, but I need to enable it. Problem: I have not been able to get to where I CAN enable it. I can access the BIOS settings by pressing F10 on start up, but I do not see the choice for the configuration of the BIOS, either on the main screen or advanced Sceen. Instead of press F10, I tried the key ESC and F2 button without success.

  Thank you, lasvegaswireman. 'Power' seems like an odd tab for HP to have placed slot but youha, it did the job!
  
  Sorry, but this new user did not find the button "accept as a Solution.

• Desktop HP Pavilion p6-2380ea: error AVG firewall and cannot install Windows updates

  HP Pavilion p6 2380ea desktop PC

  8.0 Windows improved to 8.1

  After recently making a system restore because my internet security AVG said there is a firewall "error". The system restore has not resolved the situation with the firewall. My PC is also impossible to install updates. There were more than 85 updates recently [932 MB], some have been installed, today I managed to get this up to 75. The point being no update will be that which leaves my system vulnerable to attack or make it unstable? Can someone advise me a solution to get around this PC does not complete a cycle of update?

  I noticed when using the HP Support Assistant, it will be impossible to complete "Download HP PC Diagnostics UEFI" tool.

  The second problem is in the lower part of the tool bar right, that a 'bubble' guard informing them of the low disk space you run lack of disk space on the recovery image [d]

  Click here to see if you can free up space on this drive. Once more can someone advise me a fix?

  Roger271112

  Please check this FAQ of AVG, more will help you

  http://www.Avg.com/EU-en/FAQ.Num-3265

  o fix to your problem, follow these steps:

  (A) check if no program on your computer may be in conflict with AVG Firewall (e.g. another firewall, utility of filtering and monitoring of anti-virus or network), try to remove the conflicting program.

  (B) If no conflicting program is installed, try to reset the configuration of the firewall, it will solve the problems caused by a corrupted configuration:

  To reset the configuration of the firewall:
  1. open the AVG program.
  2. click on the firewall component.
  3. click on refresh configuration.
  4. follow the steps displayed to reset the configuration of your firewall.
  5 restart the computer.

  After the computer restarts, you can be presented with associated applications firewall AVG dialogues you have previously allowed or blocked.

  (C) if the problem persists, perform an AVG repair installation

  To perform a repair of AVG installation:
  1. download the latest installer on this Web page:

  http://www.Avg.com/download.PRD-ISC.line-2012
  (AVG Internet Security 2012)

  2. click on the "Download" button and when asked, choose to save the file.
  3 choose the desktop and then click Save.
  4. double-click on the AVG installation file.
  5. click on repair the installation and follow the instructions in the wizard.
  6. when the installation is complete, restart the computer.

  (D) if the problem persists even after the repair facility, send diagnostic Support AVG from your computer data.

  To send the AVG Support diagnostic data :
  1. download runner.avgdx on this link:
  http://www.AVG.com/filedir/util/support/runner_en.exe

  2. double-click on the file, the AVG Diagnostics tool runs automatically.
  3. Enter your email address and a detailed description of issue in the appropriate boxes.
  4. click on 'results diagnose and send '.

  This will provide AVG with support additional program log files and data, allowing them analyze the problem and find the right solution.

  See you soon

  Mohammed Hamed

• HP Pavilion p7-1003wb: version for a HP Pavilion p7-1003wb SATA

  I need to replace the hard drive on my old HP Pavilion p7-1003wb (death) and I know it's a SATA drive, but does not know which version of the SATA, it is and sheet product specification for this just States SATA Office under the hard disk specifications. I don't know if this means that it is version 1 (?) or simply they didn't want ad version.

  Hello:

  It will not matter which drive sata hard speed you get, because they adjust automatically to the maximum capacity of the controller.  In other words, you can get a SATA III (6.0 Gbit/s) drive, which runs to the SATA II (3.0 Gbps) speed of the controller.

  I found this link which shows the chipset of the motherboard has your PC is supposed to take in charge up to SATA II (3.0 Gbps drives.

  http://motherboards-reviews.com/ASUS/socket_AM3/M4A785D-M_PRO/ASUS_M4A785D-M_PRO_785G_chipset_specifications.html

• HP Pavilion p6733w: BIOS version question

  HP experts out there or anyone with better information resources?  I'm looking for what type of BIOS initially provided with my computer, a HP Pavilion p6733w with a motherboard RS880 H-Alvorix.

  Hi there @chocolatejeebus,
  
  Welcome to the Forums of HP Support! I understand that you are looking for more information on the original BIOS installed on your system. I'm happy to help you with this.

  If you've never updated the BIOS on your system, or if you have updated once, then the original BIOS must always be available on your computer. This is your current BIOS or you can eat to help: desktop HP - BIOS recovery.

  The support page for your system, HP Pavilion p6733w Desktop PC, the BIOS for the Board you describe is: N-Alvorix-RS880 motherboard BIOS Update Rev A 6.07. There is no earlier version described at all.

  Please let me know if that answers your question, and if so, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion a6245n: latest version of the BIOS for HP Pavilion a6245n

  Where can I find the latest BIOS for my HP Pavilion a6245n?  The support page is a drivers and downloads"" section.

  http://support.HP.com/ca-en/product/HP-Pavilion-A6200-desktop-PC-series/3548186/model/3577452/more-o...

  Here is the download link for your device:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-A6000-desktop-PC-series/3548186/model/3577452#Z7_3054ICK0KGTE30AQO5O3KA30R1

  NOTE: Click on EDIT on the right referring and choose VISTA, and then click UPDATE
  

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• HP pavilion dm4-1160us: version of windows is more recomendable para esta laptop?

  Operating system are recomendable para esta laptop

  HP pavilion dm4-1160us

  4 GB of ram

  Intel i5 processor

  Thanks to photos of

  Hello:

  Your laptop is designed to run on Windows 7 64 bit.

  HP does not support your laptop from any other operating system.

• HP Pavilion p6-2380ea Desktop PC IDT 92HD73E Windows 8.1 does not

  Just updated for Windows 8.1 and have no sound.  It worked great on the preview.

  Found a solution by doing a manual installation on the driver in Device Manager and choose the driver located in SWSETUP on C:\

• Pavilion 6700: Pavilion 6700 entertainment version high temperature

  Has been seen problem with laptop stop under high temperature... the time CPU exceed 90oC... the GPU was 50 ° c or more... I set the max CPU to 60% in options power and since then everything is ok...
  However if I boot from a CD such as Cornis true image to backup a hard drive, it will stop on high temperature after 20 minutes (because of backup. Not complete) Iassume power options have no effect if it is started in windows, was the hope of a CPU acceleration option in the bios, but it does... I have been informed that the 6xx series is known for overheating issues... don't know if reinstalling the CPU an GPU will help you... hope my model might have a reminder for. It fixed... what of. My best options?
  I don't think that a portable hard drive can be supported Windows

  Thank you

  If you use the little drop of water that comes with the box, you can insert into the vents and get a clean enough just accomplished. Doing a few disaasembly could allow a more thorough cleaning, but there are many screws/parts in this case to access.

  https://youtu.be/fyqL5XQeaDo

  https://youtu.be/GRJhYYeJeDM

• M6-1035dx Pavilion: Pavilion m6-1035dx touchpad y axis too sensitive after upgrade Windows 10

  I installed my m6-1035dx Pavilion at 10 Windows laptop. Everything seems to work pretty well, except the touchpad. The Synaptics 10 Windows driver is much too sensitive along the y-axis (vertical movement), but it is very well along the x-axis (horizontal movement). If I try to move my cursor in a circle, I get an ellipse instead, and this disparity makes it very difficult to use touchpad. Sensitivity adjustment does not help, because it scales sensitivity times X and Y at the same time.

  I tried these different drivers with varying results:

  1. latest Synaptics touchpad driver for Windows 10 (version 19.0.19.1): Y axis is too sensitive with respect to X axis. Otherwise, this driver seems to work perfectly.

  2 no driver (Windows using the generic PS/2 mouse driver): X / axes are correct, but no other feature of the trackpad works (scrolling, etc..)

  3 last Synaptics touchpad driver driver from HP for Pavilion m6-1035dx (version 16.0.5.1) page: X / axes are correct, but scrolling does not work in many applications. This driver does not officially support Windows 10 (I think that it supports up to 7), but it seems to work correctly in Windows 10, aside from the problems with scrolling.

  I would point out to Synaptics, but they do not seem to support (as far as I can tell), so I'm posting here in the hope that someone would have an idea of what I can try next. There may be a hidden registry setting that I can change?

  Hello @mrbumpy409,

  Thanks for the reply.

  I also looked in the registry, I couldn't find anything that jumped. I speculated with the values of height and width of the corner, but change does not seem to do anything.

  I have no information on the release of driver, but you can try the driver compatible windows 8 rather than windows 7 one.

  Version: 16.2.10.12
  sp58572.exe

  Thanks, I look forward to your response.

  If this post helped you, feel free to click on the thumbs up!

• HP Pavilion DV7-4085eb: Maximum RAM on HP Pavilion DV7-4085eb (i7 Quad)

  Hello

  first: sorry for my bad English, I speak Dutch... :-)

  This question because I recently saw subjects equal...

  I'm going:

  I have a HP Pavilion DV7 - 4085eb - version Quad i7

  For now, it works on Windows7 Home Premium 64 - Bit with 6 GB (4 + 2) RAM PC3-10600 of SAMSUNG, but my RAM usage is generally higher than 53% (in surfing the web... Not even when you use heavier programs like Adobe Photoshop, then it stings through the roof...) ...

  Could I spend 2 x 8 GB RAM SAMSUNG PC3 - 10600 (so 16GB total)...?

  The description of the laptop written maximum 8 GB (2 x 4 GB), but it was in the time that 4 GB was the maximum on the RAM memory that existed...

  Hope you can help me out (& give a positive, if possible)...

  Best regards from Belgium, HermanVdD

  HermanVdD wrote:

  I have a HP Pavilion DV7 - 4085eb - version Quad i7

  Could I spend 2 x 8 GB RAM SAMSUNG PC3 - 10600 (so 16GB total)...?

  The description of the laptop written maximum 8 GB (2 x 4 GB), but it was in the time that 4 GB was the maximum on the RAM memory that existed...

  Hello

   HP Pavilion dv7-4085eb Entertainment Notebook PC specifications

  Your model is that the RAM 8 gb max support: HP Pavilion dv7 Entertainment PC - Maintenance and Service of Guide

  The i7 720QM processor also support max 8GB: i7 720QM

  Concerning

  Visruth

• update the BIOS of motherboard for HP Pavilion M7570n and now my computer going in circles

  I have a HP Pavilion - XP or version of the original software m7570n!

  Motherboard is HP/Compaq name: Leucite-UL8E

  http://support.HP.com/us-en/document/c00714544

  I downloaded and installed from HP website: update the BIOS of motherboard P5LP - THE

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-54482-1&cc=us&DLC=en&LC=en&...

  Now my computer boots into a circle.  It begins... window XP blink... I can see a quick blue screen and some info, but too fast to read... then at startup mode without failure, etc, etc, etc! Each option piced it goes back to the circle of frustration.

  I entered F1 and set it for return to the settings by default, but who has not set.  I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage.

  Someone can give me a step by step repair to understand where and how update BIOS software... is so simple that all reinstall the same file again?  I have the origianl file downloaded on my USB key.  I'm not comfortable with moving forward in fear of more damage!

  THANKS FOR ANY HELP IN ADVANCE!

  TIM

  NOW FOR THE FINAL SOLUTION:

  Google is my - so true!  I did google how to reflash the BIOs, but I kept? How I was going to do when I've never seen a 'USB key' as an option in the BIOs boot sequence.  I then looked to do the 'flash' of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you can't do from the BACK / BIO Flash or at least I haven't found a way to BACK startup disk!

  NOW, I'M TOTALLY FRUSTRATED!  Now what should I do?  I knew that the 'blue screen of death"contained the error message that I need to know! I just need to read it, but I couldn't because it flashes in a fraction of a second? GRRRRRRRRRR

  WELL!  I grabbed my digital camera Sony - put on 'SPEED' shot!  I started the computer and kept shooting until I captured the screen!  The error message was "0x0000007B"!

  I googled the error message and found this site:

  http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

  I have read on the list of options and decided that the setting in the BIOs should be where I wanted to start.  I changed the setting for the "RAID" to FDI HHD... BINGO!  I'm back in the game!

  SO THANK YOU FOR YOUR HELP AND TAKE THIS INTO ACCOUNT FOR FUTURE TECH SUPPORT QUESTIONS!

  TIM

• error code 0 x 81000203 Pavilion

  Hi my HP Pavilion p6-2380ea Desktop PC [Windows 8.1] shows an error code that I do not recognize, 0 x 81000203, when I use a Word document, [Office Home & Student 2010] This gave rise to all the functions of the printer [I have two] be disabled when printing from any MS Word document I amable to print from the web however & test the pages from the printer , but the Word turns out be a problem. I contacted Microsoft and they say this isn't a problem that they caused. Wikipedia has an article 'small problem of formatting affects MS Word 2007 & 2010'. I tried the suggestions here does not?   Does anyone have an idea what could cause this and how do I fix this?

  Hi Roger271112,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I see that your office has an error message while trying to print from Microsoft Word, and I would be happy to help you! To start, I have to ask you a few questions:

  • Recently upgraded your computer to Windows 8.1?
  • Did you recently did a system restore on your computer?
  • You have installed a new software or hardware in your office?
  • Has your computer finished all his important updates from Windows?

  In the meantime, I recommend that you run the HP print and Scan Doctor on your desk to see if the program detects software or communication problems.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• Pavilion dv6 - 7943cl: win 10 anniversary Version rewrite Sony Movie Studio Platinum 12?

  Pavilion dv6 - 7043cl, after winning 10 anniversary update, stop now with "...". a no longer works... "message systematically when I run Sony Movie Studio Platinum 12;  the stop and the message arrive at the time when the application starts, the screen 'welcome. '  It makes the app totally useless - and 5 sessions with the support of Microsoft, 2 of them with level 2 technicians, have not found the answer after more than 12 hours of conversation and many relocations to win 10 and Movie Studio Platinum 12, among other complex of measures which have tried and failed.  The program worked perfectly before the big anniversary update, which is the only difference that I can find which could explain the new stop and the error message.  Support of MAGIX (who took over Sony Vegas software line recently) reported that they were not able to reproduce the problem, but have received a report of a person havaing to reinstall an earlier version of Windows 10 (before the anniversary version) to solve a problem installing with Movie Studio Platinum.  Microsoft has promised to help the resettlement of the earlier version of win 10, for which I have no control points, so I don't know if this will help. Question: it would be useful that I heard speak of someone else for the same problem with Movie Studio Platinum 12 and win 10 anniversary update (later after all 12 Sept.)    

  While is not a user of HP Pc (I'm on a Sony Vaio) I get the same problem after the big W10 update (from 2 or 3 days)

  I have 3 versions of Movie Studio Platinum version 10, 12 (32-bit) version and the version 12 (64-bit).

  None of them work anymore, they all freeze at the beginning.

  I have uninstalled/reinstalled without success.

  I found an old post (September 2015) in a forum related to a similar problem with Sony Vegas.

  The guy said he was set to start when Windows was working in pure 'safe mode '.

  So I tried it and it worked in my case for Film Studio.

  Maybe you can try it and report what happened.

  This being said, using Studio of cinema in 'safe mode' is just a way to test and may not be the way to operate.

  I hope that someone can quickly provide a solution, if not I will have a reason more (!) to go to Windows 7.

  My trust in Microsoft has droped with Windows10 (as opposed to W7) and the way things are now pushed and forced them to the client.

• HP Pavilion p7 - 1370t CTO Deskt: Routine Driver Alert update to the old version!

  I received an email saying [email protected]

  Alert about the currents of pilot - 7 March 2015 Intel Graphics Driver (ver 9.17.10.2867 Rev.A) products: HP Pavilion Desktop PC, computers to Office HP ENVY OS: Windows Description: this package provides the original for the solutions Intel HD Graphics driver in the supported models that are running a supported operating system.

  Note the number of version 9.17.10.2867 Rev.A.

  But Device Manager shows that the driver on my computer for Intel HD Graphics is 9.17.10.2932, with a date of 12/12/2012.

  9.17.10.2932 is not newer than the 9.17.10.2867?

  Am I expected to update to an older version?

  Stay with your new version.

  It is possible that the warning you received was a false reading or the updated driver in not in the HP system yet.  If you wish not to receive these alerts, you can unsubscribe to it.