My Sansa Clip + has a 'problem '.

Similar Questions

• My sansa clip has a foreign language on the menu screen

  How can I change menu screen to English? all the songs are written in English, but the menu is in Chinese or something I do not understand.

  Have you read my link? He doesn't play? If so hit the home button, then scroll through until you see this which resembles a kick Equalizer come down 4 options. So what I would do, is choose the first choice in this menu, if it is not English try the same thing again only to choose the next option. Or call the Sandisk and they can tell you exactly what to choose.

• Sansa Clip + got wet, only volume buttons do not work, the volume on a PC?

  Hi my Sansa Clip + has been for some time on the rain and I guess that wet - volume keys do not work, all other functions OK

  TI now on "too lo wvolume" I solved it before that.

  1. is it possible to adjust my volume (now its too low after reset) on a PC connected via USB? Kind of hack volume...

  2. it should not happen, but I try send a guarantee? Maybe the wet sensors are OK cause it was just a rain...

  Any other probability/cost to fix in any fix Center "e"?

  Thank you!

  First of all, NEVER try to turn on or turn on an electronic device while it is still wet!

  You will very probably short something internally that will kill him forever!

  1 n °

  2. the warranty is for MFG. any defect of manufacture or material only! It does not include misuse of customer, as leaving in the rain, take it into the shower with you, a fall in the toilet, he swims, wear or leave it in your pocket and then do your laundry.

  2. SanDisk has not not any Center electronic "fix."

  The only thing you can do is to place the device in a bag of uncooked rice dry several days absorb moisture inside.  Since you've already played with wet it is doubtful that this will help, but it won't hurt to try.

• Sansa Clip + starts charging fully charged once more again

  My Sansa Clip + has been completely cut and I plug it into the computer to charge it.

  He has been in charge for about 3 hours and the animated indicator said he was almost completely reloaded. I take a quick shower and when I came back, I noticed that the trial load has been started again. The indicator shows u completely discharged battery and charge process now...

  Bug is fixed in the new firmware! Sansa Clip + Firmware 01.02.09 update

  However, they say nothing about it in the notes, but it works for me!

• I'm having a problem strange sync my 4 GB Sansa Clip + with Winamp

  Sansa Clip + 4 GB

  MTP mode

  MicroSDHC 32GB

  Windows 7 64 - bit Winamp (no additional plugins)

  I recently bought a new 4 GB Sansa Clip + with a 32 GB MicroSD card. Using Winamp, I synced my library on the SD card. Everything went as not expected, no problems to report, I could play all the songs perfectly.

  But now, whenever I try to sync the SD card in the player, Winamp does not appear to recognize the files he had previously synced. A window tells me that there are X number of songs on the Sansa Clip + who are not in the library and encourage me to remove them, let them, or cancel. (photo of the box below)

  

  Basically, Winamp tells me again and again to remove and re - sync a load of songs that are already on the player, which is extremely long and tedious, when all I want is to synchronize an album or two. This happens even if I plug the appliance, let it cool off, and then plug it back to synchronize again.

  If anyone has had this same problem and would be willing to share the solution, me a huge favor. Thank you.

  Nevermind, I figured it. It turns out that the solution was to set the USB MSC instead of MTP mode. Who would have thought?

  Thanks for any help.

• Sansa Clip not recognized by computer - new problem

  All of a sudden my Sansa Clip is not recognized by my computer. I use MSC forced for a year and have seen the page referred by others with this problem. Nothing seems to work. Download the new firmware will it correct even if the device is not recognized? How the new firmware can be installed on the device?

  At present the Clip plays already charged music, but I can add more.

  Suggestions? Thank you.

  JEMcQ wrote:
  OK - I'm a model. I used a charging cable not provided by Sansa. This is why the computer was not recognizing the Clip. However, is there a way to NOT use forced MSC to connect? I use it since I updated the firmware to the last spring and my thumb is painful.

  Your firmware has USB mode in the settings? If so, switch to MSC there... problem solved!

• Problems of sound quality with my Sansa Clip and Rhapsody subscription titles

  I'm at my wits end here. This last Christmas, I bought a black 4 GB Sansa Clip for me. About two weeks after I bought it, I got a low-memory error to create a database. I've reformatted the drive, transferred songs and everything worked fine... for a week. Then I got the same error message that he died completely. As in it would not turn on at all, even connected to my PC.

  I brought instead buy one leave and received a replacement. Now it will not play long pieces of subscription Rhapsody without a slight distortion starting about 13-14 minutes in and continuing to the end of the track.

  I did not have this problem with the first Clip.

  I don't have this problem with securities that I torn and transferred.

  I don't have this problem with my c250.

  I have this problem with my 4 GB Clip son cash. However in addition to the simple to burst I get with my Clip, the music also sounds distorted, with large legs on her.

  I already have the routine of songs and dances for Rhapsody. I have also updated the firmware of these two Clips Sansa to v02.01.32a, tried to transfer using two different USB cables and several USB ports on my computer. The only thing I have not done is reformat the thing. After having to transfer 600 + tracks 3 times in two months, I am rather hesitant in doing so.

  Anyone, please, help me solve this problem?

  Ah, we'll add some gloss of your clusters.

  The your Clip file allocation table a wee 4 KB clusters.  Since you have a 4 GB device, this FAT is big enough.

  Decoding of the Rhapsody tracks requires some supercomputers, being secure to 160 Kbps wma files.  The Clip is responsible for finding the next block of data, but it must focus on this huge FAT.

  The solution is simple!

  Turn on your trusty Clip.  Go to settings > Format > Yes.  This reformatted the device with 32 KB clusters, optimized for the Sansa.

  Please note that this will delete all existing music to your Sansa, and you will need to reload.

  On the other side of the coin, you will hear now own sounding music!

  If you format from Windows, it has the bad habit of formatting with teeny 4 KB clusters - and stuttering that results will make you crazy.  If you format Windows, ALWAYS follow-up with a format on the device via the parameters.

  Bob

• Sansa Clip + problems, correct the records but unknown marking and scrambled the tracks. Help!

  Hi guys,.

  There can someone please offer some advice for me and my husband before we became completely crazy?

  We bought for our daughter the Sansa Clip +, but we are having the same problem occur over and over again.

  During his music and audio books have first been loaded above all was fine. Added items displayed in the files and the right places but, now, for some reason when we add anything, the record of the album can be seen, but it also creates an additional folder that displayed as "Unknown". When you go and try to play inside this folder it does not work... "We always ensure that there is proper use of marking we MP" tag, so I know that the questions are not because of it.

  We have tried everything we can think of. Tried to update but I think we already have the latest version installed in any case - V01.02.18P, performed a factory reset, put in shape and I have tried using different modes, but it makes no sense. Why everything fine was a couple of days and not now...

  We use a 16 GB Kingston SDHC Card inside the Clip +.

  Please any ideas would be welcome because it becomes a nightmare.

  Thanks Claire x

  I should add that I am starting to think that I can have bought a card SD of FAKE writing is rubbing on the front of the card... IS this likely and if so could cause of the issues I am currently experiencing? XX

• problem with sansa clip 2 GB

  for some resason, I bought a sansa clip mp3 player, when I add music, the songs are slow to play, I formatt, I have reset but it still does the same thing it slows down and I don't like that... is there a solution to this

  I mean the song plays Slow isn't that it takes time to play or something... I have a sansa e260r. I sync music from windows media player right when im finished with the sansa clip to check if the problem is still there, the songs of the e260 is normall speed of the song, but the problem remains on the clip... it plays any song at slow speed

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• Power outage Sansa Clip

  Hello

  I have a 2 GB Sansa Clip I bought about 4-5 years ago and have been very happy with it.

  He runs the version of the 01.01.30A software.

  However, recently and for no apparent reason suffering from power cuts.

  It would just turn off, no matter how much battery there left, how long it has been running or what he does. And when we turn on (which is sometimes hard to do) he can't remember the last thing he was playing.

  After further tests it seems to turn off when put under different angles, almost as if there is a piece on the inside that is open/close the connection. When shaking a slight ratteling inside there, but I can't be certain that's not making noise power switch.

  Of course, this looks like a hardware problem.

  So, how can I open it and fix it? Is there a diagram somewhere I can look at?

  Thank you

  Max

  Well, I opened it and looked around in there.

  True, the battery had detached from its adhesive strips and pulled the loose battery negative cable.

  Gently, I took out the battery and was able to resolder the wire and test that it works before you all shut up.

  My double-sided adhesive foam Strip seemed to be too thick, so I used a drop of silicone glue to prevent the battery from moving around.

  All together again once, case snapped back and forth between them well.

  A little notation around the seam is a small price to pay for a media player that fully operational once again.

  Thanks for all your suggestions!

• Can not record songs on a Sansa Clip +.

  I recently bought the Sansa Clip + and it has firmware version V01.01.05F and the song rate feature doesn't seem to work. I choose 1-5 stars and select the choice, but the note is not saved. Another poster asked a similar question and its solution involved affecting USB MTP mode, but this has not worked for me. Any suggestions?

  Thank you

  OK I thought about it, the new firmware fixed this problem for me.

• Help! My Sansa Clip + is no longer recognized by my PC when connected by USB port!

  Reading, the latter time, ' said, 'written' only when connected. Normally, he alternates between the 'Reading' and 'Writing' when it is connected to the PC and, therefore, it USED TO BE recognized by the PC in these conditions. The device is not recognized in Windows Explorer as a device or disk as usual. I use Windows 7. The device is not recognized by Windows Media Player synchronization purposes: I can't synchronize playlists of music more.

  You try to reset by pressing the power button / stop 20 seconds does not help.

  Using different USB ports does NOT help.

  The cable using different USB does not help.

  Another computer has NOT appeared.
  

  SOLVED BY TECH SUPPORT CHAT: Here is the conversation with the restorative troubleshooting following steps:

  Jonathan Bailey is me:

  Kyle Ahmed is the man of SanDisk tech support:
  

  
  

  Of the troubleshooting information for "not recognized by PC.
  ***************************************************************************

  Kyle Ahmed: Please tell me the exact model, color, and the ability of your Sansa player?
  Jonathan Bailey: black, Sansa Clip +.
  Kyle Ahmed: Please provide me with the ability as well?
  Jonathan Bailey: I think it's a 4 GB
  Kyle Ahmed: Please tell me when and where did you buy this drive?
  Jonathan Bailey: Citrus Heights, CA, Jan 2012 target
  Kyle Ahmed: If I understood you correctly, your drive is not getting recognized by the computer?
  Jonathan Bailey: No, it is not when connected by USB.
  Kyle Ahmed: Please tell me, are you using Windows 7?
  Jonathan Bailey: Windows 7
  Kyle Ahmed: I understand. Please connect the player to the computer.
  Jonathan Bailey: It should say READING and WRITING.
  Kyle Ahmed: very well. If you please, right click on computer and select manage.
  Kyle Ahmed: Click Device Manager in the left pane.
  Kyle Ahmed: Sansa player will be displayed in the right-hand of Device Manager: 1. USB mass storage device
  (if the player has MSC) 2. portable (if the player is set to MTP mode)
  Jonathan Bailey: he is profiled as a Portable device Sansa Clip + 4 GB
  Jonathan Bailey: a yellow exclamation point icon
  Kyle Ahmed: right click on the drive with the error indicator and choose uninstall.
  Jonathan Bailey: icon done, went
  Kyle Ahmed: In the top menu, click Action, and then select search the hardware changes.
  Jonathan Bailey: said device still WRITTEN in reading
  Jonathan Bailey: said ball driver software not properly installed
  Kyle Ahmed: very well. Please disconnect the player from the computer.
  Jonathan Bailey: ok, says still WROTE
  Kyle Ahmed: Please press on and press and hold power for 20 seconds to turn it off.
  Kyle Ahmed: Then, press and hold the Center button while connecting the device to the computer.
  Kyle Ahmed: It is on the first view the drive between the up/down/left/right button.
  Kyle Ahmed: This allows the computer to recognize the drive as a removable storage as well
  You should see it in the devices with removable storage section in the computer.
  Jonathan Bailey: it says CONNECTED then he says SAN Disk alternately
  Kyle Ahmed: Check if the drive is recognized by the computer.
  Jonathan Bailey: there is now a SANSA CLIPP (F): in my Windows Explorer navigation pane
  Kyle Ahmed: It seems that pilots of the PSG of your computer went corrupt due to which your
  Player is recognized not earlier. In this case, what you have to do is to reinstall Windows Media Player or
  change the USB mode of the player to MSC permanently solve the problem. But the MSC mode will not allow you
  by creating playlists with Windows Media player to transfer songs from your player.
  Jonathan Bailey: Windows Media Player Sync now recognizes "SANSA CLIPP"
  Jonathan Bailey: I need Windows Media Player synchronization capability or the Sansa is not good for me.
  Kyle Ahmed: Jonathan, please check if the player is displayed under the Portable devices or with
  Removable storage in the computer (Explorer)?
  Jonathan Bailey: It's showing under devices with removable storage in the computer (explore).
  Kyle Ahmed: Please disconnect the player from the computer.
  KKyle Ahmed: Please activate the drive.
  Kyle Ahmed: Then go to settings > system settings > USB mode.
  Kyle Ahmed: Then in the player's main menu, go to settings > system settings > USB mode.
  Kyle Ahmed: PSG and click the Center button to confirm.
  Kyle Ahmed: very well. Now, connect the drive to the computer and check if she gets recognized or not.
  Jonathan Bailey: OK now recognized as his former self again.
  Kyle Ahmed: If the player is now recognized and alos appear in Windows Media player, I'm wrong?
  Jonathan Bailey: I have not checked the media player yet
  Jonathan Bailey: it is recognized in Explorer
  Kyle Ahmed: Please disconnect the player from the computer.
  Kyle Ahmed: To check the version of the Firmware of the player.
  Jonathan Bailey: ok, it says REFRESHING YOUR MEDIA
  Kyle Ahmed: very well. I would like to know once you are in the main menu of the player.
  Kyle Ahmed: Go to settings > system settings > Info.
  Kyle Ahmed: Give Me the version of the firmware of the drive please.
  Jonathan Bailey: Version V01.02.16A, isn't it?
  Kyle Ahmed: It seems that the version is up-to-date.
  Kyle Ahmed: The reason why it took more time to update the media earlier must be because of the large amount
  songs that have been transferred, which can take the time to read.
  Jonathan Bailey: OK, for 2 500 songs, it usually takes about 15-20 minutes
  Kyle Ahmed: I understand.
  Kyle Ahmed: You have faced a temporary problem that was solved by resetting the player and refreshing the drivers of your computer.
  Kyle Ahmed: You should not face additional problems.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Sansa Clip + short circuit

  My sansa clip + stops or crashes whenever the slightest Pressure is applied to the front. I'm relatively sure that there is a short circuit somewhere in the unit. This makes using it almost impossible and incredibly infuriating that it accepts several tries to get to what I want to hear without freezing. Whenever it freezes and if off, it resets to where it was when I turned it on, which is also irritating. I tried to restart it and I'm relatively sure that it is not a software problem. I had the player for about two years, although I him have not used exclusively as I had a phone that played music (I lost this phone last week). This problem has been present for several months and I'm not very eager to buy a new player, as the clip has been very useful and well done before this problem.

  Looks like it's a Goner. Fortunately, they are relatively expensive. It's not as if you replace a Cowon for $250 - $ 300.