HP Pavilion p7 - 1370t CTO Deskt: Routine Driver Alert update to the old version!

Similar Questions

• Video driver not updated to the latest version... Troubleshooting help please...

  Hello and good day, group... We have here a few CQ4010F desktop computers. I pushed recently updated Windows and a PC (1PWC) now has a video driver to version less about that. The PC I compare (0SDQ) is great for video with full 1920 x 1080 is available and Acer E211H monitor display. For PC with the issue, the resolution will not be max (stuck @ 1600) and the screen credits. The goal is to get (1PWC) to the full resolution and correct monitor please.

  Here are the specs for the two because both machines are the same for the Prod #:

  Models: CQ4010F, ABA-Prod #NY650AA, stock video NVIDIA GeForce 6150SE nForce 430, stock charge RAM 4 GB, 64-bit, SP1 Win7 (after windows updates)...

  I compared the pilots, and they do not match when comparing machines:

  -(1PWC); NVIDIA, on 14/05/2009, version 8.15.11.8593, signed MS Windows

  -(0SDQ); NVIDIA, 01/04/2010 (new date), version 8.17.11.9739 (latest version), have signed MS Windows HW compatibility Publisher<--- want="" please!!!="">

  I can not get the most recent driver to load on the PC with the question. I pushed for troubleshooting updates driver Windows on (1PWC) several times. All say that the driver is updated? I did a driver update... process also with the reporting of the pilot system is running when it is not.  I went to the site of NVidia and NVidia driver downloads tell me that the correct driver is installed, when it is not. Interesting java Nvidia GPU playback tool said unknown to the GPU video about the PC card product? The 'good' PC reports the right product analysis offshore GPU and offers even update a more current Nvidia driver. I as well before it is rip out together video driver and loads a basic 640 x 480 driver, then start in safe mode and reload the driver proper. But I don't know if I did the steps correct basic video driver load correction method.

  Hope it was not too verbose. I am running "on this feedback rabbit hole an and any circular or troubleshooting tips would be great. Be advised that it is the PC with the southbridge NVIDIA North/South wobbly mobo that also has problems of USB.

  Thank you-

  /WF

  Hello GPS-Tech,
  
  Because the tool indicates the video card as being unknown, that it does not find a driver to update because he does not know what to look for, as well as update microsoft assumes that the driver is up to date because it has no idea of this driver to get.
  
  Your best option is to manually install the driver by accessing the site Web of NVIDIA manually by lifting the video card and the driver installation.
  
  I think it's the right driver
  http://goo.GL/67li4

• Pavilion g7-2017us: updated date of the Bios but sysem watch still the old version

  I tried to download and install a new version of the BIOS (F.26, June 2014) after having a few problems with the laptop heating and freezing programs. Download details indicated that it was highly recommended.

  I tried today and the system has shown that it was already installed. I looked at C drive and it shows under bin SWSetup\sp66805\0183AF26. I have no idea what it means. It shows a date of 17/06/16 as installed. I looked into this for a while, but I know that I have not installed it.

  I do not understand why information system still shows: version of BIOS Insyde F.25, 29/05/2013 if it is supposed to have been updated.

  Help, please!

  Thank you

  AG

  Hi @Anne47,

  Thank you for joining the HP Forums!

  I understand that your Bios has updated but still showing the old version, with your HP Pavilion g7-2017us Notebook. I'm happy to help you!

  It is very strange, as the updates only I see available in the Software and Driver Downloads page were dated 1 March 2016.

  For now, I recommend to go through the steps in this guide, updated the BIOSand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• G7-1178 Pavillion laptop: I need the old version of HP support assistant for Pavilion g7

  Please help me find the old version of tune!

  The new version of tune works properly or have all the tools or tune ups like the old version, I had.  I tried to find it on my computer, but only the new version is there because I deleted the old windows system files.  New version don't ask what country I'm in or whatever it is that the site says that he should ask and what it is supposed to have included.  Please help me find a link to the old version of the HP Wizard, I've had with addition of Windows 7 Home Premium.  His Pavilion laptop g7 - 1178ca that I bought in 2011, so there is no updates or drivers for it from HP.  I can't find a way to make the 'tune up', which i did on a regular basis, it is not the case on the new version with windows 10.  Thank you for your help and your time.  I live in the Canada.

  Hi, Niki:

  Nothing is never easy, is everything!

  Unfortunately, I do not know what that all means is.

  I was hoping it would work only.

  When you look at the list of the supported PC version is supposed to work with, I thought it would be too much work for your model.  Although it does not list the series g6 or g7, supported, he shows much older models supported by this software.

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68201.CVA

  Now, I wonder if you really need to turn on the old version of net framework 3.5 of in W10...

  To install net framework 3.5 in W10, do you it from the control panel > programs and features > turn on or off windows features > check Add net framework 3.5, which also includes older versions.

• The CAB driver file - help with the new version of driver

  I am populating my MTD drivers with system of cab files and reviews of a few of them show yellow in the State saying there is a new version of Driver at support.Dell.com. I'm still new to this, if it sounds silly. Where is this driver updated exactly and how to import the said pilot in my environment of MDT? I tried to go to the page my OptiPlex model drivers and I do not know if this is where I'm supposed to find it. I downloaded the driver and extract the files. Sometimes it does not work like that; for example drivers chipset allow to extract, there is a setup.exe file that I am looking for the drivers inf on but then I've never had this work. While generally you do, when you see a new driver in the list state of CAB. Here's what I'm looking at: http://en.community.dell.com/techcenter/enterprise-client/w/wiki/5004.optiplex-9020-windows-8-1-driver-cab.aspx

  The yellow dots on the 'Delta' report show which has been updated since the last version of the car.  This does not mean you need to get a new version of the driver.  A full explanation can be found here-> http://en.community.dell.com/techcenter/enterprise-client/w/wiki/4884.driver-cabs-understanding-delta-reports.aspx

• Can I use the old version of PS and LR on my drive OS x 8.5 and newer versions 1015 on my OS x 10.10 as a system disk dual boot?

  I want to upgrade to the new creative cloud but it requires me to update my OS from MacPro OSX 10.8 to 10.10. I like to keep the two operating systems, so I created a duel boot disks. If I update creative cloud on my OS x 10.10 disc can I still use the old version of the creative cloud on OSX 10.8.5 when I boot this disk?

  Wrmarcy Yes you can install it on both drives.  Please be aware that each facility will count as an activation.  You can activate your membership on up to two computers at the same time.  You can find more details to the enable and disable Adobe products.

• HP Pavilion p7 - 1050t CTO Deskt: graphics card problem of 610 GT desktop HP Pavilion p7 - 1050t CTO

  I have a HP Pavilion p7 - 1050t CTO desktop PC and you want to install a GE video card FORCE GT 610. Online research indicates that the card must be compatible with this motherboard (PEGATRON CORPORATION 2AC2). The BIOS is FRIEND V7.14 dated 11/08/2011.  I have improved the power supply to a 750 W unit and 8 GB of RAM. I'm on Windows 10. The jury has a PCI slot express v2.0.

  When I install the card, the computer does not start after the first blue screen to press ESC for installation. At this point, the computer hangs and must be turned off manually. If I remove the card and back on board graphics, everything is fine.

  I just wanted to update the chart because the edge does not support OPEN GL 3.2 graphics, I need new software recently purchased.

  I'm sure that's not the card as this is the second card I tried, with the same results.

  Any help appreciated.

  Never mind.  I decided to just buy a new computer.

  Thank you.

• Pavilion 17z-F200 CTO: How do I change turn on the num lock (NumLock) key have a State by default to it?

  How do I change turn the num lock (NumLock) key a Pavilion 17z-F200 CTO to have a State default one?

  System BIOS has no setting for it. By another post, I tried to set the value of register in HKEY_USERS\. Default\Control Panel\Keyboard for "InitialKeyboardIndicators" of "2147483648" to "2147483650. It seems not to change after a reboot.

  Yes, the BIOS settings was the first thing I checked. But BIOS seems to only contain States in order for the locks of keys on the new HP Pavilion or Envy laptop.

  I did more research and found more credible sources to TechNet asking to change the same registry value to 2. I tried it and it works a fact/do.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• New hard drive. can I copy the old emails and local files from the old hard drive

  I installed a larger hard drive in my laptop. I still have the old hdd. Both run on Windows 8. How can I copy all the information like e-mail, files, etc. the old hdd to the new HDD. It is in Thunderbird. Please can someone help me?

  Article has step by step instructions.
  
  Where are you stuck?

• Why the * doesn't have Adobe messes with the drive? I hate to have to spend time to learn a whole new operation when I was happy with it as it was. Anyway I can get the old version back?

  I'm the only p * d off with the total redesign of the Adobe reader software? He created a task force for me, and change seems driven by the desire to Adobe to pimp their "cloud" storage and other services.

  You can always uninstall the drive and then reinstall the version you want. I suggest that you download and use the full drive offline installation program from the version you want from http://get.adobe.com/reader/enterprise/

• Why sovereign funds on my hard drive do not use the latest version of Flash Player?

  I've looked everywhere and I don't know why no one seems to be talking about this.

  When I view a SWF in a browser it uses Flash Player 11.6, but when I view a SWF file on my HDD it uses Flash Player 10. Why is this? It's driving me crazy.

  

  I already know that Chrome uses several different Flash players. One of them is the built-in Flash Player and the other is the 'system' Flash Player. I assumed that the Flash Player system is one that is running when I opened the SWF file on my hard drive, but this is clearly not the case. I tried to uninstall Flash Player and I could always open the SWF file on my hard drive and they always said Flash Player 10. What happens here? How many players Flash do I? Looks like there is a Flash of Chrome's built-in drive, a system of Flash Player AND a Flash Player that is used for the execution of the SWF file on my hard drive.

  I am running Windows XP and I have the latest version of Flash Player. I know because I was installing it again and again trying to solve this problem.

  The standalone version of Flash Player (projector) is not updated with the Flash Player browser add-ons; You must download the latest standalone player manually http://www.adobe.com/support/flashplayer/downloads.html

• Pavilion 550qe Desktop: is the extensible desktop Pavilion 550qe computer of SSD HARD drive and also increased the RAM?

  I buy the HP Pavilion 550qe desktop computer, and it will come with a 1 to HARD drive and 8 GB of ram.   I'll be able to open and pass at the disk for one SSD... and also, can I replace the 8 GB of RAM for 16 GB?   Is RAM welded in, or is it replaceable?  I heard that HP is very difficult to spend at home, this is true even with desktop computers?

  You are welcome!

  Yes, you can upgrade the memory.  There are two locations of memory on the motherboard.  This is the page for Specifications of the motherboard of the computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion p6-2133w: graphics card will be not updated of the drivers

  My Amd Radeon HD 6530d will not update the drivers I have tried everything to update the drivers from 15.201.1151.0 to Crimson Edition Beta 16.2.1 any help will be appreciated

  @drago72, welcome to the forum.

  Normally, the drivers other those provided by HP will not work with their motheboards.  I suggest you go to Device Manager / graphics cards / right click on your video card / select Update driver software / search automatically for updated driver software.  If there is an updated driver, it will be found and installed.  If this is not the case, he will tell you that it is up-to-date.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• I'm just wondering, once I installed upgrading LR6 should I keep the old versions on my computer? I want to reduce the amount of unnecessary things on my hard drive.

  My hard drive has always versions 4 to 5.7 and I can say that just disk space they take.

  Hi FlHarleyDiver1,

  You can uninstall previous versions of Lightroom, once you have installed 6 Lightroom and you are satisfied of this.