Ultimate windows automatic update cannot be disabled.

Similar Questions

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Windows automatic updates to doubt?

  In windows 7, in windows updates, when we select "install updates automatically (recommended)" and then set the time when to install updates, to just install the updates then (downloads at any time seized in accordance with his will) or download them first at that time and then to install it?
  As my use of the internet is free from 02:00 to 08:00 and I want that windows should download the updates and install them automatically at 03:00 (it would cost my internet charges). If I put out there like "every day at 03:00" time, it will download at that time (which I want it to be), or simply install at the time (I don't want to use my day consumption for the updates of windows... I want to use the free part!).

  p.s. it restarts the computer automatically after installing updates (I don't want) or to delay the recovery until I wake up in the morning and do it myself (I want it)?

  If it does it automatically, is it possible to stop him?

  From: Understanding Windows automatic updating

  When the updates are downloaded?

  Updates are downloaded behind the scenes when you are online. They do not interfere with other downloads. If you disconnect from the Internet before an update is fully downloaded, the download process will continue the next time you're online.

  When the updates are installed?

  It depends on the automatic update option you choose. If you choose the recommended option, updates are installed at 3:00 or on a schedule you choose. If you turn off your computer before the scheduled time, you can install updates before shutting down. If your computer is in a State of economy of energy (sleep or Hibernate) during a scheduled update, and if your computer is connected to a power source, Windows will wake your computer long enough to install new updates. If your computer is running on battery, however, Windows will not install updates. Windows will try to install them instead at the next scheduled installation.

  Through the above information, it seems that Windows Update is download the updates when the system is online and install them during the scheduled installation.
  Updates need to reboot the system to replace files in use will be to reboot the system without any user interaction.

  As far as I know, when WU is set to automatic, there is no way to restrict the time when the system will download the updates.
  If the edition of Windows 7 is the ultimate edition, professional or business, one can configure the options of restart and guests reboots via Group Policy. In addition

  PowerShell cmdlets in Windows 7 introduces a set of 25 new cmdlets, which allow administrators to manage and automate Windows PowerShell through Group Policy. With these cmdlets, a COMPUTER administrator can backup, restore, report on and configure (through registry settings) Group Policy objects. This feature is added during the installation of the GPMC.

  PowerShell cmdlets also applies to editions listed above of Windows 7.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• alert security Windows may be disabled, and automatic updates cannot be activated

  I downloaded and ran Microsoft Security Essentials, Malwarebytes, Glary Utilities, Advanced Windows Care, SuperAntispyware, and nothing seems to disable these WINDOWS SECURITY ALERTS that appear every time I start the computer.   I can not turn ON the automatic Windows Update, and the DIFFICULTY IT CENTER that displays an error and then closes, advising me to go to this FORUM.   Can someone give me please a different direction.   Thank you.

  Hello

  1. What is the exact error code or error message that you get while you run the fix it Center?

  2 would. what Fixit you perform?

  3. what happens when you turn on automatic updates?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Check if the Security Center service is turned on.

  To do this, follow these steps.
   
  a. click Start, type services.msc and press enter.
  b. double-click Security Center.
  c. set its Startup type to automatic.
  d. define the status of services to Started.
  e. click OK.

  Method 2:

  Set the date system and the hour correctly according to the time zone that you belong

  HOW to: Change the Date, time, number, and currency value displays in Windows XP:

  http://support.Microsoft.com/kb/307938

  Method 3:

  Run the file system (CFS) checker.

  Steps to perform a scan SFC:

  a. click Start, click principally made programs, Accessories, and open the command prompt.

  b. type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on Scan SFC below mentioned: http://support.microsoft.com/kb/310747

  I hope this helps.

• file loss or damage after running automatic updates, cannot run windows without having to re - install

  I am currently running Windows vista 64-bit, but I'm unable to allow automatic updates to run because it results in loss/damage/corruption of files.
  It will install everything as usual and reboot the computer, but instead of windows startup, it reports that windows cannot open because there is a missing or damaged file. The pc is not repairable by placing it in a previous restore point or using the at startup repair shop and I find myself having to reinstall VISTA to get the pc working again. Accordingly, Iam unable to install service packs for Vista or other updates to the system because I don't want to reinstall my computer is there a patch or fix for this error?

  J0seph1ne,
  If you have a question whenever you install an update with the loss of corruption\file then it is possible that you have a problem with your hard drive or with and infection.  You can try the tools\links below.  I suggest you then install just a few updates both to seek only possible that poses a problem.

  Disk error checking

  Get rid of malware

  Can I clean an already infected computer?
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP: Automatic updates cannot be activated?

  For some reason, when I start my PC, the small icon bottom right tray comes up saying the automatic updates are disabled. So, I click on the bubble to open the Security Center interface and click on the button "Turn on automatic updates" and I get a little error box indicating:

  "We are sorry. The Security Center could not change your Automatic Updates settings. To try to change these settings yourself, go to system in Control Panel. On the Automatic Updates tab, select Automatic (recommended) and then click OK. »

  So I go to system in Control Panel and click on the automatic, but Automatic Updates tab is already selected.

  So I can't tell if they are actually on or not. Does anyone know what is the problem?

  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll

  Press Ok

  Also I suggest you to check your system as suggested by Jose Posada.

  K

• Cannot update to photoshop elements 9 on new computer Windows 10.  Cannot be disabled from old computer Windows 7, since he's dead.

  Impossible to update photoshop elements 9 and first elements 9 on new computer Windows 10. Recorded.  Cannot be disabled from old computer Windows 7, since he's dead.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• cannot activate or put a tick in the circle to my page of windows automatic update?

  I tried to put the check mark in a circle: "install updates automatically" resources / links: one States some settings are managed by your system administrator, and I click on 'other info' I have access to a microsoft Web site, but does not give me any insite on what and how do I get my auto updates on I have windows Vista Home Basic Upgrade to home premium disc software im at new for this kind of things but im learning fast because of%$@^^&^&# stuff like what is happening every day, it seems... hope thisdetailed enough

  Hello Bigbrotherbrian,

  I think that thie problem is maybe due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)

  2. Strategy of automatic updates is enabled

  3. Automatic updates (and Windows Update) access is blocked by group policy

  To solve problems, just follow the steps below:

  To do automatic updates options configurable by the user (only for stand-alone systems), remove restrictions 2 & 3 above.

  • Click Start, run and type REGEDIT to . EXE

  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate

  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the value DisableWindowsUpdateAccess.

  Hope that this resolution should solve your problem.
  

• Cannot access Windows Automatic Update after fixing error "generic host for Win32 process.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:

  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module is not found.

  Please help me to get the automatic updates to run.  Thank you!

  Go to OPTION B (or, preferably, OPTION C).

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• After Windows automatic update, laptop screen becomes completely white

  After the automatic update of Windows, the screen of my laptop to become completely white. I have to Ctrl/alt/del to Task Manager. The bottom of my screen appears, but no wallpaper, shortcut icons, etc. I disabled the automatic update and it seems to work fine. What could be the problem? I am running Vista.

  Following the advice of a friend who had the same problem, I deleted all my cookies. Surprisingly, this fixed my problem. Thank you very much for your help!

• I had a password lock after a Windows automatic update 14/10/09.

  I restored the system to a point before the updates, and I managed to open a session, but the updates keep installation every time I stop and I have to keep restore to be able to connect. I changed the settings to do not automatically updates, but it keeps the installation anyway, and then it does not recognize my password until I have restore back again before the updates on 10/14. How can I hide the updates or otherwise prevent install?

  Hello

  Control Panel - updated Windows - right click on HIDE - you may have left superiors settings allows you to set
  it to download, but not install if you have a chance to HIDE. Once done, you can set it to auto.
  -------------------------------------------

  You should probably make these institutions.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista is stuck in Mode without fail after Windows Automatic Update 17 Oct.

  Including all the details, I can:
  I have Windows Vista Ultimate on my Velocity Micro,
  Pro Magix E2230
  Intel (r) Core (TM) 2 CPU 6700 @ 2 .66GHz 2.67 GHz
  With 2.00 GB of memory a 32-bit operating system.

  I was working to test a program Oct. 17 and the automatic update of windows, kicking. I let it do its thing and leaves the room. When I got home and booted up my computer, he was stuck in safe mode.
  I looked for help via the windows itself, nothing seemed appropriate.
  I tried several solutions, I found online as well as nothing has worked.
  
  Options, I tried:
  Update of drivers.
  Checkdisc running at startup.
  Programs, accessories, run MSCONFIG untick initialization, normal startup check safe mode.
  Startup and pressing F8 choose Normal startup option, this works to all first then comes in safe mode instantly back again as programs initialize at startup.
  Cold from it after abruptly closing out game of jealousy, tension, technical fittings, threats using my laptop preferably in front of him (hell sometimes to other issues, it seems to work), begging, please, let her rest. Nothing seems to work.
  The window of the second floor starts to look really tempting right about now.

  Ah yes I tried to restore instant snapshots prior twice now also using time before the update when everything worked. They work first then everything is started he returned once again in safe mode.

  Hi Maxczarr,

  Welcome to the Windows Vista answers Forum!

  In addition to what you tried you can also try the Startup Repair. That might solve your problem.

  Follow the below given steps to perform a Startup Repair:

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  For more information, please visit the below given link:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  You can also run a file system (CFS) auditor to see if any of the file system are damaged.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, please visit the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows automatic updating is not the case on a new computer

  Original title - Windows XP update problem

  I realize windows xp is going to be is no longer supported, we have especially window seven machines, but I had this old original disc for XP Home and an old PC and I wanted to the operating system, it was one of the best systems of operationg Microsofts of the past.

  I tried in install this xp on another machine, a dell computer with intel inside and everything worked, but the old dell was slow and confused easy.

  So I scratched this unit and now I have a unit with an AMD inside, the operating system has been verified Original and has been activated by the call to the activation.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Code of Validation caching: n/a
  Windows product key: *-* - YTG44 - 9FHW8-74K2J
  The Windows Product Key hash: wqJVpib8Ra4GiKvW3/LNww5noAg =
  Windows product ID: 76477-OEM-2163934-49167
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 5.1.2600.2.00010300.3.0.hom
  ID: {FA8A036C-8E3F-4408-B2A9-D47AF387B10F} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {FA8A036C-8E3F-4408-B2A9-D47AF387B10F}1.9.0027.05.1.2600.2.00010300.3.0.homx 32*-*-*-*-74K2JtheS-1-5-21-776561741-725345543-682003330376477-OEM-2163934-49167MICRO-STAR INTERNATIONAL CO., LTD.KM400-8235Phoenix Technologies, LTD6.00 PG20040116000000.000000 + 00028F43CC70184207B04090409Central Standard Time(GMT-06:00)03109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: no
  BIOS marker string: N/A
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  now windows to this day do not work, I have manueally installed the necessary current top-dates, down load and install on mine.

  How ever there are other issues related to this fixit said was the corrupt problem entered in the register, almost everthing verified fixit showed was in trouble.

  I tried "the pirates of registry" and does not really depend on their ability, the problem is still there.

  I changed the name on the wba file and had validated the operating system for the second time, no help at all.

  Although I could never use the web site windows update, I had automatic updates, windows allowed 132 + updates to install, even this will be undate is no longer this device, I tried to turn the auto update turned off the system restart, then activation updates, which did not help.

  At this point, present an repaired actually a problem of update, I know that xp only will continue until April 2014.

  Note it is a XP OEM operating system was complete with sp2, I downloaded and installed the sp3.

  as I said I installed manually all the available updates for this machine that were not needed and even the manual attempt to installed, updates, windows don't settle.

  Hi Robert,.

  Could you please run through the steps I posted in the following link and see it they solve your problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-doesn