Ultra 135W and 170W same basic docking station?

Similar Questions

• Still boring stuck 0.8 Ghz with docking station

  If I put my W520 in sleep mode, put in my docking station and run it, it is still stuck at 0, 8 GHz! Same throttlestop will not work!

  take it and on the dock during the race makes no difference. Oh well, there is a difference: as it is off the COAST of the docking on battery only, I can get full speed with turbo boost by judgment of the accelerator, but beware if I put it again on the docking station...

  the only thing I can do is to restart the laptop, then I get the message: the power of the AC adapter is too low compared to the system has been shipeed with (I HAVE the original PSU 170W on my docking station!), then it starts with TB works very well.

  These issues will never end, lenovo?

  What BIOS version and the version of the power manager that you have? If its not 1.30 and 3.62 try this combination and see if it helps. What CPU do you have? Docking station that?

• EliteBook 8440p: Elitebook MB error starting on docking station!

  I have Elitebook 8440p and docking station.

  Docking station works well - because of the other laptop works fine with it.

  When I restore default BIOS or Hard reset BIOS - to the first laptop runs on the docking well.

  But next time, laptop does not start on this Doc station - 'caps look' and 'numlook' will Flash 5 times (such as error MB)

  And without docking station, everything works fine.

  I'm starting separately witouth laptop docking and after I put on the docking station.

  It's very uncomfortable disconnect the laptop with reset every time! (

  And launch on the doc for several station are second slover - is this normal?

  Maybe there is a problem in ME BIOS region (last F.50)?

  One, a crazy idea?

  Yes! A lot of things ME region.

  I assembled new BIOS complete with own Intel ME region and first start on Dock Station and everything is done!

  Now everything works. AMT/vPro, TPM and Doc station.

  P.S. Does anyone have Original Full Flash Bios (8MB) for the flashing material?

• Super Speed USB 3.0 Docking Station - no power supply laptop?

  Laptop is on and plugged in the docking station which is "powered".  Connection to the monitor / keyboard and mouse is fine, however I am surprised to see a less power - plug is soon message.  Docking station is not supposed to power the laptop?

  In fact, I think that what makes a docking station for a docking station, because it is a device that actually connects to a docking port. Thus the name docking station. A usb port isn't a docking port. A docking port is a single port that provides many pine so different protocols such as video, audio, usb, and Yes power etc. all have their own connections so that they can operate at their full potential. A docking port is not a conversion of many protocols for a usb signal, then try to cram two ways between the pins a lot less. And saw that all the "docking ports" as far as I know, have connectors to supply them, I do not see how Dell calling a port replicator a "floor" could confuse someone. I don't think whether a good faith error or another, simply tactical knaves in the marketing department to take advantage of what people believe to be a docking port so that they can make a nickel. Think that a wharf shipping, with access full power, fuel, water, sewer connections, the whole shebang. But rather a boat anchor so that you can anchor your boat to the coast, so take your time waiting on what ever ashore ship transport boats you can find the basket with a limited amount of resources via a limited method.

• docking station HP & hp Advisor

  I closed the docking station to save the changes I made and then it disappeared completely.  I didn't know that it was probably the right lower task bar.  I tried to reinstall after link I found on the HP site but know the dock as well as the Advisor does not work properly.  When I try to open the program a status bar appears with them, (the type of status bar that shows when something is downloading) but he and freeze the programs.  The Task Manager is the only way to shut down programs at this time.  I would like to be able to get the hp Advisor and especially the hp docking station works again... with losing them my files and programs thanks to a system restore.   Can someone please?

  Thank you.  This seems to have fixed everything.

• Personal Media Drive (HDD) is not recognized in HP xb4 Docking Station laptop with HDX 18i

  Hello:

  This is my first post since obtaining these three pieces of equipment.

  a lot of problems with my new laptop and separate hard drive docking station.

  But this one is the most annoying:

  my HP Personal Media Drive HD10000x slips into a Bay (specifically for these players) on my xb4 docking station.

  Connected to the docking station is my laptop, a HDX18.

  Everything works very well between the laptop and docking station, except the HARD drive: it lights not or anything when you slide into the dock media Bay.

  This is supposed to be 'hot-swapable' and everything, but it is just dead.    It's new, but I hate to send it back (at my expense) if there is another problem here.

  If someone has encountered this?

  Help, please!

  Thank you

  You need to connect the power adapter to the personal media player - at the back of the dock XB4, next to where sits the personal media player.  So there are two adapters CA / CC plugged into the XB4.

  Message edited by taylorspam on 11/23/2009 07:45

• HP 230W docking station USB 3 port works in usb mode 2

  Hello

  I have a HP 8770W laptop and I bought a docking station HP 230 on amazon (this docking station: http://h30094.www3.hp.com/product.aspx?sku=10432928&pagemode=ca)

  also this page mentions that are all 4 ports usb, usb docking station 3

  but when I insert a usb device in them that works on usb mode 2

  computer laptop usb 3 ports works well by themselves, but host usb ports 3 station always operate in mode usb 2...

  and also there's no guarantee

  so is it possible to fix or at least try to solve this problem?

  Thank you

  Hello Ali_AlipourR

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• I have a problem with the USB3 Kensington docking station.

  Original title: Kensington USB3 Dock

  This device worked perfectly until today when the audio and LAN work ceased. Device Manager shows no drivers for these 2 items. The display works fine, USB ports very well.

  Tried to search manually and automatically for drivers, but nothing helped.

  Hi Mike,.

  Have you tried the steps suggested in the previous post?

  After you complete the steps suggested, if the problem persists always answer here. And we will help you further. We at Microsoft tender towards excellence.

  Hello

  Thanks for the suggestions. Yes, I did everything above and nothing helped at all. Ethernet and Audio via the docking station USB 3.0 still does not work.
  Then I found the updated driver from the supplier of chipset used in the dock of Kensington (Displaylink) here:
  http://www.DisplayLink.com/support/SLA.php?fileID=95 - it's called DisplayLink USB graphics for Windows software version 7.3 M1 dated July 12, 2013.
  I had already tried the versions 7.2 M1 (as dated May 10, 2013) and 7,2 M0 (dated April 3, 2013), but they did not resolve the issue.
  Sorted!
  Hope this helps others.
  Mike

• X 60/X 61 does not start in docking stations

  Hello world

  I just got another strange problem: two laptop computers (X 60 and X 61) are not
  Boot (Win XP) in their docking stations: after the XP Logo screen display

  stays black and there is no activity on the HDD (I waited for approximately

  30 min); I also tried to start inside without a docking station
  LAN connected cable, but it also did not work.

  If you disconnect the laptop and start them out docking stations they
  startup (Win XP) fine. When the logon screen is displayed that you can put back them
  in docking stations and work with them as usual without any problems.

  Is there a special driver to be installed or what should I do?

  

  Thank you
  Loathar

  (1) starting the laptop outside the mooring station, plug it in before logon

  (2) download the latest "Intel Matrix Storage Driver" and extract it
  to a new folder

  (3) open the - Device Manager and goto the "IDE" or the "storage"-controller, "".
  Select your SATA controller and click on the 'pilot' - button.
  Finally select the folder of destination (2) update the driver.

  (4) restart the system, check the BIOS for "SATA = AHCI"-framework and everything ".
  should be good.

  ---> Install this driver via 'update-system' not always seems to work fine!

• Multiple monitors with laptop docking Station

  I currently have a laptop with a closed lid hung in its docking station, it has 2 external monitors connected by separated through the docking station DVI ports that are configured for a dual monitor set up. Locally on the laptop, it works fine, but when you run the VMview Client (v5) the virtual session recognizes only a monitor. The laptop model is a Dell Latitude E6530 and is the Dell docking station. PRO2X. Our typical installation fuels the virtual desktop customers Wyse zero configuration double monitor works fine. But with the laptop and a station, with options of Windows display, it does not recognize another monitor connected. Does anyone know what I have to do to make this work? When I configured the machine dedicated through VMware View Admin (v5.1) I chose to allow up to 2 monitors.

  In the view of the customer, when you select the office you connect to.

  Below the list of available desktop computers is a menu drop down called "Display".

• Ultra docking station - for T410s and T450s

  Is there a docking station that works with the T410s AND the T450s?

  I'm thinking of it:

  Lenovo ThinkPad Dock Ultra 170W (40A20170EU)

  who really works with the T450s - but what of the T410s. Y there compatibility down or the interface has been changed over the years?

  The new docks are not compatible (with the exception of the docks of the USB).

  A reference tool handy to determine compatibility is compatibility Options Lenovo matrix you will find:

  https://support.Lenovo.com/us/en/documents/um006391

  If you need a Lenovo docking station abandoned for your T410s, there is a program called Continuation of Options Lenovo program that makes available abandoned docks of Lenovo and any other Options of Lenovo.

  https://support.Lenovo.com/us/en/documents/ht037291

• Docking Station T430, Graphic interfaces laptop and a usable station at the same time?

  Dear community,

  I have a Thinkpad T430 and I want to use two external monitors.

  The Thinkpad T430 has just a mini Displayport and I don't want to use the VGA port.

  So I thought to buy a docking station.

  But there are several of them.

  I just need an additional port display (Miini) or DVI.

  The question is: if I buy a docking station

  which provides a Mini Display Port addition or an additional DVI port that I am able to use one of the docking station and integrated laptop mini display port?

  Thanks for your help.

  Kind regards

  Marskuh

  Hi marskuh,

  You should be able to use both ports simultaneously.

  Let us know if this isn't the case.

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.

• Satellite Pro L670 - 11 d and Dynadock U10 problem re-docking station

  This my first post on this forum - I hope I have the right category.

  We have a user with a Satellite Pro L670 - 11 d attached to a port replicator Dynadock U10 USB.

  Everything seems fine, except when press us the disconnect button (or select eject Dock) the laptop leaves the great.
  However when we try to anchor (for example after a meeting of bureau) it does not recognize the usb connection and docking station won't. We usually have to restart at this point. We are attentive to reconnect to the same usb port.

  Has anyone seen this problem and know a fix?

  Thank you

  David

  Hello

  Have you noticed this problem only under this Dynadock U10 or perhaps with the external USB HDD too?
  In my opinion, it sounds a bit like the issue of the BONE and not like the Dynadock question.

  I would recommend this control by using a USB HDD.
  Connect the USB HDD to the USB port as well.
  Then, disconnect the USB HDD and unplug the laptop HARD drive. Reconnect the HARD drive and check if the HARD drive would be connected again.
  If the same thing would happen with HARD drive, you should check the USB port
  Maybe the chipset driver will need to be updated

  But if the HARD drive is raccorderaient ok and if the question does not seem to be using the HARD drive, then, it would be necessary to check the Dynadock maybe reinstall the Dynadock from the software again.

• Problem with laptop and docking station

  Hello.

  We have two laptops with two docking station. Two laptops with docking station have the same problem:

  When the computer is off and its still connected to the docking station, the fan in the computer to run very fast starting. The fan turns on for a while. That's a lot of noise, which can be annoying to the person using the office. When the computer is turned on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?

  1. number and product name

  HP ProBook 6460 b

  Docking Station VB043AA

  2 operating system installed

  Windows XP 32-bit

  3. error message

  No error message.

  4. all changes made to your system until the problem occurred
  

  No recent changes.

  Thanks in advance.

  -Betroger

  Its been a while that we have solved this problem, but I forgot to post the solution.

  We sent the laptops in for repair. They changed the motherboard and fans. This solves the problem.