Personal Media Drive (HDD) is not recognized in HP xb4 Docking Station laptop with HDX 18i

Hello:

This is my first post since obtaining these three pieces of equipment.

a lot of problems with my new laptop and separate hard drive docking station.

But this one is the most annoying:

my HP Personal Media Drive HD10000x slips into a Bay (specifically for these players) on my xb4 docking station.

Connected to the docking station is my laptop, a HDX18.

Everything works very well between the laptop and docking station, except the HARD drive: it lights not or anything when you slide into the dock media Bay.

This is supposed to be 'hot-swapable' and everything, but it is just dead.    It's new, but I hate to send it back (at my expense) if there is another problem here.

If someone has encountered this?

Help, please!

Thank you

You need to connect the power adapter to the personal media player - at the back of the dock XB4, next to where sits the personal media player.  So there are two adapters CA / CC plugged into the XB4.

Message edited by taylorspam on 11/23/2009 07:45

Tags: Notebooks

Similar Questions

  • My external HP Personal Media Drive device - does not appear on my computer

    My external HP Personal Meda drive does not appear on my rhubarb, I tried all USP ports on my computer and it will not be displayed. When I connect my HP Personal drive to my Labtop there is no problem, it presents itself. Any suggestions? p

    Hello

    1 - is the external hard drive not detected in the Device Manager?

    2.

    3. did you work before?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try to download and run the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: Also check if it is detected in disk management.

    a. Click Start.
    b. Ttype diskmgmt.msc in the search box of start, then press ENTER.

    c. check if the external drive is detected.

    Method 3: Try the steps from the link below, which will help you change the drive letter.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

    Method 4:  Also I suggest you to try the steps from the following link:

    Tips for solving problems of USB devices

    Hope this information is useful.

  • E6420 not recognizing USBs when at docking station

    New Dell 6420 running Windows 7 32-bit - when you are connected to the docking station, it does not recognize the USB ports. Ive connected my USB mouse in every usb port and nothing to receive. I connect it to the port on the laptop itself, moored and its recognized. My first thought was bad docking station, tried another (both are new) with the same result. I actually ended up trying all 4 together during my whole process. Ive done the full restart, plug back on and off the docking station with the same result. I tested the usb ports moored in the bios - the mouse is recognized in all ports. That's when the laptop is docked, in the bios settings. So I thought Windows problem, maybe a bad installation... I started Windows and now all but 2 usb ports on the docking station (or port replicator, I should say) detect the usb mouse and other usb devices. I also checked the device (while only docked and undocked) Manager the only thing Bell is an unknown device under usb devices (this unknown device stays anchored and detached).  Any suggestions on what can happen and what I should fix this... im trying to stay away from doing a full reinstall.

    Thank you.

    WARNING: THIS MAY NOT SOLVE YOUR PROBLEM (but there is an equal chance that it will be then I would try it if I were you)

    Hello

    I just started a new job and had the same problem. I fixed it as follows:

    Go to the computer

    Go to system properties

    Go to the Device Manager

    You should see "Network adapters" section full of "Unknown devices" for me there were two of them and two other devices with unrecognized names.

    Right click on each one from the first on and select "update driver software...". »

    Select "search automatically.

    After I updated all of these drivers and plugged the nano-receiver for my keyboard and wireless mouse in the dock of the computer finally recognized and let me use the keyboard and mouse, I use what I'm typing this message :)

    I hate to see these tickets up on sites for years without anyone answering them that it's really frustrating, and not a good sign for a manufacturer/vendor like Dell. Hope everyone who comes on this forum with this problem is it resolved.

    Best,

    Mike

  • HP Personal Media Drive - cannot get support

    Hello

    I tried to look for a "soft" or etc. but has not found category. I hope that I write to the rgiht category.

    I have a HP Personal Media Drive that I am attemptign to solve problems

    hd0000

    part # rf863aa

    500 GB capacity

    The problem I have is when I connect the drive to the system, it says device not recognized USB. However, he keeps making connection/disconnection noise notise. Bing bing, do. Bing bing, do. He did this continuously until I have unplug the USB cord or power.

    I tried the following

    I have tried 3 different PCs

    I have tried 2 different cables

    tried it on windows 7 as well as windows 8

    I feel that it is a real problem with the drive itself. I tried disk management, but I know that because this prevents the disconnect/reconnect the disk and not can not connect successfully, it seems like there may be a problem of internal material with the reader.

    My major problem is to get to this issue. Today I have the support of google # and looking for where to get help. I found this page

    https://h22207.www2.HP.com/ca-en/contact-HP/product/HP-HD5000s-personal-media-drive/model/RF863AA#Z7...

    Does not help very much

    I called this number

    1-800-474-6836 (1-800 HP INVENT)

    I now at calle 4 times. I get a call centre in India. They tell me that I need to talk to the accessories Department.

    I had transferred there and waited 20 minutes and hung up. So I called again. Once again, they me transferred.

    I tried 35 + minutes, had somone on the phone. After spending 15 minutes to get all the part numbers, etc serial numbers - it was obvious that they then had no idea what to do, they still have me once I was in the bad service I was calling not to the United States and Canada.

    They me transferred again and I was transferred to a number of key busy/false.

    I called back once again, even once said that I needed to be transferred... not too impressed at this point.

    Nobody has been able to give me the # direct I should call either. I'm really frusterated. Help, please?

    This device has an external power supply, I would first of all that. Resist the ear and check the that continuous rotation.

    If it's running, plug the USB to a rear port. It may take 5 minutes to initialize. If you hear click (s) and then no rotation continues, it's probably in bricks/dead.  HP offers no repair service out-of-warranty units. (1 year).

    Disassembly (different flavors for different design cases). Adapter for the device.

  • Unable to access HP Personal Media Drive in Windows 7

    My wife desktop PC has failed.  I need to access the data on the HP Personal Media Drive and it attached via the USB port on my Windows 7 laptop.  However, the drive is not recognized and Windows says that there is a driver error.  However (a) according to HP, there is no Win7 drivers for this drive.  (b) according to Microsoft, the drive is compatible with Windows 7?  How the hell can I access this disk?

    Click on 'start '.


    In the search bar, type 'Computer management' (without the quotes). Click on the program icon that shows up (should be at the top of local search results).

    Search in the left pane of the window 'disk management '. If you don't see it, click the arrow to the left of "storage".
    Look for a drive that is not titled "allocated." If you see one, check to see if it is the same size as your Media Player. (A 1 TB drive will show as Go 931,51, etc..)
    Right-click on the unallocated disk, then click on 'Create a Simple Drive'
    Go through the wizard using the default settings. When the screen where you can name the disc, name 'HP Media Drive' (or whatever you want).
    Once the wizard is completed, wait a few minutes while the disc formats. Then open 'My computer' and the drive will be displayed.
    Right-click on the icon, then click on "Create shortcut" If you have a desktop icon to access the drive.
  • HP Personal Media Drive 1 TB

    Since 2009, I used the HP Personal Media drive on my desktop PC HP Pavilion a6152n with no problems. I was using Vista without any problems.  My computer has 6 usb ports and they all worked like a charm.  I used media player for all my backups, smartphone and computer.  A few days ago, I've upgraded to windows 7 and were not able to use my media player since.  My computer will recognize the usb ports when forced, but lists the media as unknown device player when he admits to all.  I tried to update the driver without result.  I uninstalled the device, disabled the device, tried to assign a letter to the reader all to no success. I'm finally to the point that when I plug the drive on the computer, the computer tells me that I have to format the drive to use it.  The drive has been formatted originally under Vista.  I'm afraid that if I format it now, I'll lose all my files.  Help, please.  I point out that I took the car to work and this computer using XP recognizes the drive media and actually allowed me to open the files.  The computer at work is about 10 years old and very basic, no dvd drive, etc...  I also get code 43 when you try to update the drivers.   Thank you.

    make the number of days!

    Hello

    Thank you very much!  My computer now recognizes the PMD.  I was able to open some files, and they seem to be OK.  Once again thank you.

  • Problem with my Personal Media Drive hd1600

    Hello

    I have a problem with my HD1600 Personal Media Drive.

    After formatting, Windows 7 can not recognize it. Only the power of the blue light is on

    in the Hp website, I can not find the driver software

    Please help me

    Thank you

    As is the case, what I would do then is to format the drive outside of the Windows environment.  I like to use a Linux on CD or GParted on CD.  Unplug your hard drive after the CD and boot from the CD that you did.  With your hard drive disconnected, there is no chance of accitentally choose the wrong drive and the PC will work fine to either that of the CD.  Format the connected USB HD1600 Personal Media Drive everything using one of the version of the Linux CD in the NTFS format.  If it is completed, the disc is OK and you should be good to go.

  • Help please: Personal Media Drive Installation

    Hello to all on the Forum HP... I was hoping I could get help regarding installation a HP Personal Media Drive in my desktop HP Pavilion m7480n computer... I am a newbie and considered average at best, with regard to my knowledge with computers... So, I was hoping that someone could possibly provide me with a link, or anything else... With step by step instructions... Photos included would be a bonus... lol... lol... I'll give you more information regarding the HP Personal Media Drive that I have below... Thank everyone once more in advance for their time and patience... Have a great day everyone.

    HP Personal Media Drive:

    -Model # hd5000s

    -Manufacturer RF863AA

    Parts supplied:

    -Adapter with power cord

    -6 USB 2.0 certified Interface cable

    Hi Nacster,

    It is very possible that the previous owner disconnected the cables. Here is an document (and video) player showing how to replace or add a hard HP. In it, you will see how the Bay of the PMD is connected the hard drive cage.

    It might even be that the internal USB cable is detached from the motherboard.

    I hope this helps. Let us know how it goes.

  • How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

    How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

    Hi vtdubu,

    ·         Did you do changes on the computer before the show?

    Follow the steps in the article.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  • How to reconnect to a personal media drive Bay

    It was very stupid of me but I unplugged the cables for my Personal Media Drive Bay when I tried to remove the hard drive for maintenance.  I didn't really attention to where the white cable that looks like an audio connector is gone.  After his return from the hard drive, I can't find the connector of the personal media drive Bay.  If I had to install the external drive, I would use a USB port to connect the player to the computer, but I don't know where this subject is on the motherboard.  I searched the internet for help entered empty.  Help, please!

    On your motherboard, you should see a connector with 2 rows of pins together. One of the lines is missing in a hairpin bend on the left side.

  • I need to talk with a person. My ISP is not recognized by email Thunderbird

    I need to talk with a person. My ISP is not recognized by Thunderbird. In addition, Thunderbird does not recognize the IMAP server that my ISP insists.

    I need to talk with a person.

    This forum is the official place to support Thunderbird. There is no phone for Thunderbird support.

    My ISP is not recognized by Thunderbird.

    If the new account wizard is unable to detect the right settings for your email provider to run "Manual Configuration". https://support.Mozilla.org/KB/manual-account-configuration

    Note, prior to that, you will need to get the server required your email provider settings.

    Thunderbird does not recognize the IMAP server that my ISP insists.

    You will need to tell Thunderbird to use the IMAP protocol for incoming server when you set up the account manually.

  • Can not download emails at all on my laptop with Windows Mail.

    Can not download emails at all on my laptop with windows mail.  My son changed the incoming parameters: pop.att.yahoo.com and outgoing calls: smtp.att.yahoo.com.  He said it was the most recent settings from at & t that we are on.  Is this correct?

    original title: no email entering

    See this and not the section on authentication.
    http://www.ehow.com/how_6459327_setup-Yahoo-DSL-Windows-Vista.html

  • Elitebook 6930p Wireless does not work then in the docking station

    Elitebook 6930p Wireless does not work then in the docking station, no idea how to fix this? It worked, then I got a soft image, not its broken.

    Visit this link

    WINDOWS XP - network connection turn off/on docking station

  • HP Personal Media Drive 500 GB: external HDD not recognized

    Ran a cleaning defragment the external hard drive... Now I can't access the drive, Windows Explorer is just he labelling "L Drive" and I just got an error window saying I need to format the drive.  Will not format the disk wipe?  Help!  Drive is an external image storage... Always panic Mode!

    Glad to hear it, please keep me informed on the final result.

    Lesson learned here, do not do a cleaning of the external drive using the Windows Cleanup utility.  Defragment is OK however.

  • I just replaced my cd/dvd drive with a new TEAC one. I have Vista (32-bit) but iTunes Windows Media players, it is not recognized as a burner and won't read blank media. I need help!

    TEAC DV - 28 S - W model number

    Hello

    Try these steps and see if it helps.

    Step 1: Run the provided article fixit.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Step 2: Run the troubleshooter of CD/DVD burning.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

    For ITunes:

    http://support.Apple.com/kb/ts1436

    See also:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

Maybe you are looking for