Ultra widescreen LG

Similar Questions

• [Pre-sales] WS10 ultra widescreen and Windows 8.1

  Hello

  I own WS9. I installed the latest version 9.0.3 install VM Windows 8.1 and Windows Server R2 2012.

  I have a problem with the display.

  I use 3 full screen HD related width NVidia Surround Mode with 2 graphics adapter GTX590 connected in SLI Mode.

  With all previous versions of windows and open suze, I use a 5760 x 1080 screen.

  With my Windows 2012R2 Windows 8.1 years it remains black in this resolution.

  My questions are:

  1. If I upgrade my WS 9 to 10, think you that resolution 5760 x 1080 will work?
  1. Can I test WS 10 without a license, just to check if it works?

  Thanks for your answers,

  
  Best regards

  
  Laurent

  A few suggestions:

  (1) for the change (upgrade) versions of Workstation, uninstall the version (it will ask you if you want to keep the license and the config data, say yes) and then reboot before installing the new version. Always do this when there is a change to a different version, so be it: more-> most recent or most recent-> older. I always followed it and have not had a problem installing/uninstalling (been doing this for several years to WS 5 and 6)

  (2) If you think you might want or need to go back to an older version of Workstation, using existing virtual machines, do not update/change the material of the virtual machine. If you upgrade, it may not work when go back to an older version of Workstation. (This can be corrected, but you then have to reinstall the older version of Workstation and downgrade Hardware virtual machine - just a pain to do).

  (3) when the upgrade/change the Workstation version, it is much more secure to ensure that all virtual machines are 'stop' (and not 'suspended') before doing so. Starting a VM suspended with a different version of the workstation is not a good idea. I work sometimes and not other times and I even trash a VM (I didn't a snapshot to return).

  4) "I suppose that my off VM will not be affected by this, right?" - OK, the virtual machines that are not started should not be affected by your test. (At least I've never seen a problem)

  FWIW: WS: 10.0.1 has its share of problems right now especially with the help of the invited VMTools. Just browse the forums using key words like "hgfs" and "vmtools" for more details. IMO, WS 10 fixes a lot of things, but the current version violates as a few essentials for me and as was the case with the latest major versions some, continuous WS to get a slower flow on the USB connection or network traffic with every new version major and material more fast does not seem to help at all. If it was not to support Windows 8.1, Unity Linux and USB3 Office, I would use WS 7.1.x.

  YMMV.

  Good luck.

  Post edited by: Bill Johnson, correction of typo in the version of WS

• Resize the application window to customize the function of the screen - problem?

  I know this may seem a little geek,

  but I wanted to know why the function of the shortcut is irregular:

  Resize the application window or floating window to fit screen. (Press again to resize the window so that the contents of the screen.)

  CTRL +-(backslash)

  Command +-(backslash)

  1 window Resized to fit screen - activated via the shortcut Ctrl +-

  

  2. the window is not Resized fit screen - function is disabled have it minimized the window

  (The title bar is hidden,

  but the right is a vertical space,

  where the software does not match the screen completely.)

  

  I want to know why this happens,

  at least on Windows is... (Yes, I use Windows 10)

  It would be on purpose?

  Some features to help with something,

  When the user returns to minimize the window?

  I wanted to keep window screen will perfectly still.

  even when minimized and return to the software;

  I need more space on the screen,

  in the vertical direction especially (because I have a screen ultra widescreen 2560 x 1080).

  To see a preview of the video is better,

  because 50 percent of the preview screen,

  However, if the proposed title bar (i.e. without use shortened).

  lose a small percentage.

  I want the amount of space as possible.

  I'm tired of getting retracing the shortcut each time I pass a task.

  Submit a bug report and use the version of application window for now. Maybe someone here could offer a workaround solution, but I think we have said pretty much everything what it means

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• 34 "wide ultra LG and MBPR 15 'Sierra resolution problem '.

  Please advise, people

  34 "wide ultra LG and MBPR 15"NVIDIA GeForce OS Sierra do not support the native resolution.

  

  

  In fact, I have 25 "model UM25. However, Sierra recognizes as UM34 anyway, and I'm having exactly the same problem. I've updated to Sierra yesterday.

  

• macOS Sierra no longer supports monitors ultra wide angle?

  Just install macOS Sierra and the required resolution for this monitor ultra wide LG no longer appears. Anyone know of a work around?

  

  My problem with my monitor LG UltraWide is now that it will expand just the 1920 x 1080 rather than on el capitan, where he could go to 2560 x 1080, seems like Apple just ditches ultra wide support

• Reformat the WD My Passport Ultra for Mac does not

  My Ultra passport was once on my Windows 7 PC. I reformatted since it on my PC just to get all the information out of him.

  I want to format it to work on my Macbook Pro for Time Machine, so I looked into how to do it. He told me to open the disk utility, choose the drive and choose "delete".

  However, the 'Clear' button is grayed out and it wont let me delete it.

  Yet once again, the disk has already been formatted on my PC, is empty.

  Is there perhaps a way to format it for a Mac on my PC?

  You can't use a PC to reformat a drive for a Mac, take a screenshot of the drive with the drive connected utility, so we can see what you see.

• External ultra wide screen not working not not on MBP 15

  Hello - Ok, I spent a ridiculous amount of time on it so I hope that someone has had this problem before.

  We have a few that ultrawide poster here and each one has a resolution of 2560 x 1080. We also have a couple 13 '' Macbook pro 15. They do not seem to get along well.

  Symptom1: When plugged into the ultra wide monitors via HDMI, the resolution is 2560 x 1080 native, but this is horrible... text is blurry, the colours are strange, just terrible.

  Symptom2: If connect us via Thunderbolt monitors in a Dual Link DVI cable, image is more neat and clean, but OS X allows only a max of 1920 x 1080 resolution.

  More information: this happens on all of our ultra screens wide. When plug us these screens on a pc, it is literally plug and play. These aren't the high-end computers in the slightest... much cheaper than our Mbps.

  Anyone run into this and you could provide guidance?

  Thank you!

  try to access resolutions additional skins to Apple for some reason any

   > System Preferences > display

  Click the radio button "Chipped" while holding down the OPTION key.

• WD Pass Ultra does not connect to MacAIR

  Hello

  I have a MacAir 2012, running the latest software including El Capitan... last night, I have connected my WD My Passport Ultra to the laptop computer and left overnight to back up via Time Machine. In the morning, when I opened the computer not only had the back towards the top do not run, but the drive has ceased to appear in the Finder.

  I restarted laptop, Finder, reset the PRAM and SMC, and tried to open utility disk - which does not start upward and only do so if I disconnect the external hard drive. I have connected the player to a desktop Windows PC and player controls indicate the hard drive works fine. In ADDITION, when you are connected to a Mac the drive spins and flashes indicating power going through so I can not think that it is a cable problem.

  Can someone help me please? Disk utility does not start if the drive plugged in, so I can't unmount/mount... Held the WD driver manager and who is stuck at 90% so I try to leave it overnight to see if that solved the problem.

  Would appreciate any comments.

  Thank you

  Jean-Pierre

  Omaahm wrote:

  Disk utility does not start if the drive plugged in, so I can't unmount/mount...

  I always recommend any new drive formatting, to ensure that all proprietary software are removed, e.g. Manager of drivers WD

  After you start DiskUtility then plug in your WD drive, you can try to force mount

  DiskUtility > file > install

• When Motorola Droid Ultra will support?

  Not currently on the list of devices supported.

  Hi MAB5,.

  There is currently no intention to create an official port of Firefox OS of the Motorola Droid ultra.

  However, the Firefox OS is a system open source where users and contributors can attempt their own peripheral ports that are not officially supported. Please keep in mind that there is a risk of bricking a device in this way.

  For more information on porting your own version of the Firefox OS, you will find the following link:

  • https://developer.Mozilla.org/en-us/F.../porting

  We hope that you will find this information useful. Please let us know if you have any other questions.

  Thank you!!

  -Ralph

• SanDisk ultra II 480 GB ssd update for macbook pro 2009 (5.4)

  Hi, this is not a question but just some information that I wanted to let down as I was cultural for this search but could not find any info anywhere here or elsewhere online...

  My 6 year old, 250GB internal hard drive died and I decided to replace it with an ssd, after looking at all the options and additional information about compatibility issues, problems of crash/stand etc. I decided (without a clue and fingers crossed) with the sandisk ultra II ssd 480 GB

  So far so good, the mac works amazingly fast, no el capitan osx installation problems and no problems with SATA speed negotiation, turns the 3gps. It is like having a brand new computer!

  Conclusion: upgrade 100% recommended

  

  I recently took a similar decision for my Mac Pro Tower silver server, install two 960GB SSD of this manufacturer (Sandisk).

  The SATA 3 G bps Bus SATA Mac's limits you to a maximum of about 375 M bytes/second. Although this is a little slower than maximum speed than the SSD applications (on the order of about 500 cases of best M bytes/s), it is still fast enough.

  Improving the speed on a rotating disk is so great, it is certainly useful.

  Make sure that you activate the TRIM on your SSD. If ongoing 10.10.4 or later, you can use the Terminal command:

  sudo trimforce enable

  (your password is not included, you will be notified that it is serious, and a reboot will be once the TRIM is activated).

• Mac Mini 4K Ultra HD Display Support - 10.10.3

  Hello

  The current Mac Mini is now 4K ultra HD displays 60 Hz by Thunderbolt? I know that she has no use for but he has done some suggestion with the 10.10.3 software update now. I'm looking to connect it to the monitor Philips BDM435OUC/75 (3840 x 2160) which has a mini port.

  Thanks in advance for your help. There appears to be some contradictory information.

  Apple says only 4K@30Hz.

  Uses here reported that they got only 30 Hz connected via the Thunderbolt and HDMI port

  Yosemite 10.10.3 allows now Mac Mini 2014 to disk 4 K OHS displays at 60z?

• Slate 7 impossible to insert the sandisk ultra 32 GB micro sd class10

  I bought a sandisk ultra 32 GB micro SD class 10 SKU SDSDQU - 032 G-CFAP-out of amazon. When I insert in my 7 slate and push on to try to get to the spring to engage and the drive to go it is not. I can't get the SD card to stay in and I feel a spring, but it won't click to take the SD
  Is this a compatibility problem because I bought the bad micro SD for the 7 slate or I do something wrong to load? Or my new slate had a defect?
  
  Any help greatly appreciated
  
  Thank you
  GK

  Make sure that you are pressing far enough. It will not be flush with the edge of the device; It is accidental ejection/loss of the microSD card. You may need to use your nail, on a credit card, or small flat-head screwdriver. (I can do that easily with a fingernail and mine are short, but others have reported that it is a little challenging).

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?

• How can I adjust the settings of Firefox to display the content in a format widescreen?

  How can I adjust the settings of Firefox to display the content in a format widescreen?

  You mean zoom? If so, check the module NoSquint .