UMDF HID minidriver device error

Similar Questions

• Re: Z570 - need driver UMDF HID minidriver

  Hi, my system is an Ideapad Z570 and I downloaded everything I have for WIndows 8 of the Lenovo support site. I have a yellow unknown device in my device - device manager of UMDF HID minidriver.

  Help, please. Thank you.

  Hi virendrapareek,

  The User Mode Driver Framework (UMDF) facilitates the creation of pilot, which in this case, the Human interface Device (HID), which is usually done refers to USB devices. If all of your USB devices work, there is a possibility that this UMDF HID driver is intended only for the operating system preloaded to the Lenovo Z570 which is Windows 7 and is currently still unavailable through Windows 8.

  Concerning

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• MTP device error

  I have a Samsung YP - K3 mp3 player that Windows XP (with Service Pack 3) now is unable to connect/sync for.

  When I connect the MP3 via the USB port, the Hardware Wizard detects it as new hardware and try to install it.  However, after a few minutes the following error msg appears:

  Cannot install this hardware.
  MTP device
  An error occurred during the installation of this device.
  The specified service does not exist as an installed service.

  I don't know why this error occurs, as I have previously been able to to connect/synchronize with the MP3 without any problems.  I got this player mp3 more than 2 years and this error has surfaced only last month.

  After searching on the Microsoft answers forum, I'm a little discouraged with many unaswered questions on MTP Device error!

  I hope that my question will be the exception and someone has the answer.

  Thank you
  The

   How to enable PSG in Windows XP (SP3) - HC 3.2

  Sorry for my bad English.

  DPW HoneyComb 3.2 for WINDOWS XP (SP3)

  -Portable Media Player (internal storage and SD CARD)

  Solution:
  1. unplug your Dell Streak 7
  2. edit the file locate c:\windows\inf\wpdmtp.inf (the folder is hidden)

  Code:

  ; Installation inf for devices supporting Media Transfer Protocol (MTP)
  ;
  ; Copyright (c) Microsoft Corporation.
  ;
  
  [Version]
  Signature="$WINDOWS NT$"
  Class=WPD
  ClassGUID={EEC5AD98-8080-425f-922A-DABF3DE3F69A}
  Provider=%Msft%
  LayoutFile=layout.inf
  DriverVer=02/22/2006,5.2.5326.4762
  
  [DestinationDirs]
  MTP.Files.Kernel = 12
  MTP.Files.XPRT_USB = 11
  MTP.Files.Core = 11
  MTP.Files.UMDFDDriver = 12,UMDF ; copy to system32\drivers\umdf
  [Manufacturer]
  %MfgName%=Generic,NTx86,NTamd64
  ;
  ;Device is identified by Microsoft OS descriptor
  ;If your device does not support it, use specific VID & PID for identification
  ;
  [Generic.NTx86]
  %GenericMTP.DeviceDesc%=MTP, USB\MS_COMP_MTP
  %GenericMTP.DeviceDesc%=MTP, USB\VID_413C&PID_B10B&MI_00
  ;
  [Generic.NTamd64]
  %GenericMTP.DeviceDesc%=MTP, USB\MS_COMP_MTP
  %GenericMTP.DeviceDesc%=MTP, USB\VID_413C&PID_B10B&MI_00
  

  It's my VID and PID, my Dell Streak 7 (Wi - Fi version).
  Device Magener-> PSG-> hardware ID.

  The Dell Streak 7 does not send the Hardware ID "USB\MS_COMP_MTP" to Windows XP, Windows Vista and 7, no problem.

  Connect your Dell Streak and install the software automatically for MTP device.

  This solution is for all devices honeycomb for Windows XP.

  http://Forum.xda-developers.com/showthread.php?t=1291293

• I/o device error series Equium

  I have a satellite phone and when I put the DVD in the drive I get:

  d: / is not accessible
  and
  This request could not be performed because of an I / O DEVICE ERROR.

  Please someone can help, I had a lot of problems with this laptop and wondered whether or not I take repairs... yet again!

  Hello

  This error is displayed because the drive is not able to read DVD media.
  It would be interesting to know if this happens with all DVDs

  In any case, I think you should try it first;

  Access to the registry, and then remove the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this short intervention, restart the laptop.

  If this doesn't help then the chances are that the player could malfunction
  In this case, you should ask the technician to phone for help!

  Good luck

• Satellite P30-145-IO device error

  My problem is with the so-called player super multi, when I insert a DVD - RW I get i/o device error, I tried other brands and CD also with the same result.
  It works very well with the 'true' DVD but not the accessible variety in writing.
  I tried using Microsofts IE. the whole thing of IDE ATA/ATAPI controllers with nothing does not.
  Can someone help with this frustrating dilemma?

  [Edited by: admin]

  Hello

  As far as I know there is no one-size-fits-all solution for this type of problem. Try to remove the device from Device Manager, and then restart the device.

  You have this problem for a long time?

• HP Jet 7, 8.1 Win Win 10 update and Bluetooth "devices errors."

  I did the upgrade from 8.1 to win to win 10.  So far, I've noticed all my devices Bluetooth "devices errors."  I have deleated all BT devices and tried to charge the BT device to my soundblaster roar 2 and a simple generic keyboard and I got the same results. I have tried reconnecting with other devices.  Did someone went down this path? HP, Microsoft, suppliers... has a driver upates?  I have not read on win 10?  Device Manager will be my frined here, deleting and reloading BT associated drivers?  What do you say?

  Hi, Yes, my bluetooth mouse works fine on my Stream with 10 Windows 7, device drivers are available from hp.com.  You could try to reload the driver bluetooth of Windows 10.

• Tecra A4 PTA40E: DVD rom IO device error

  I have the portable Tectra A4 PTA40E. When I insert a disc into the DVD Roam driveand try opening. I get an ie error message is D:\is not accessible. The request could not be performed because of an i/o device error.

  I reinstalled the driver, dosent them work again.
  Help, please
  Thank you very much

  Hello

  It looks a bit like a hardware problem but first try them all these common advice;

  First try to remove the drive from the Device Manager and restart the laptop. Windows should recognize the CD/DVD drive and re-install the drivers.

  If this does not help, you must check this document knowledge of MS;
  You receive an I/O device error message when you try to use your CD-ROM drive in Windows XP
  http://support.Microsoft.com/?kbid=891894

  According to this MS document, you should try to change the Transfer Mode to DMA to PIO and back.

  I hope it helps

  PS: this forum thread might be useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

• Qosmio G20: device error - "no audio device found".

  Audio device error showed "no audio device has been detected" and seems to have lost the link to the audio device. Any advice on how to restore this lost link please

  Sorry, but your description of the problem is really more than ridiculous. Explain what is exactly the problem, and when this error message occurs.

  Do you use external device or what?

• Qosmio G20 - DVD RAM i/o device error

  Hello

  I need help.
  My dvd ram driver do not work dvd.

  When I run the dvd he told me "the requested could not be performed because of an i/o device error" and I don't know how to fix it.

  Try to remove the optical drive from Device Manager, and then restart your laptop.
  The reader should be recognized again and correctly installed.

  Please try to test again the feature with CD or DVD media.

  You can use ODD as boot device?
  ODD is displayed correctly in Windows Explorer?

• On Satellite A100 DVD drive is not accessible - i/o device error

  I have a Satellite A100 - 01 G, but the CD/DVD drive is not accessible when I try to open the files on a disc. When I try to run a disc I ge "the request cannot be performed an i/o device error.
  When I click on the drive icon it says that the application is not found.

  Help, please.
  Thank you

  Hello

  Have you tried to update the CD/DVD drive?
  You could go to the Device Manager and could remove the reader of CD/DVD from the list of devices.
  Then, you must restart the laptop.
  After restarting again the Windows operating system will recognize the new device as the CD/DVD drive and will initialize and reinstall the driver.

  Then try using the new CD/DVD drive

• Satellite A110: D:\ is not accessible - i/o device error

  im getting a message saying d:\ is not accessible and then below it says the request cannot be performed because of an i/o device error can someone help me with this please

  Post edited by: willvila

  Hello, William

  I'm not 100% sure but I assume that you have problems with ODD (optical disc drive)? Am I right about that?

• No boot device error - early 2014 Macbook Air

  Forgive me if this has been posted elsewhere, I could not find another post as of yet with my set of circumstances.  I have a Macbook 2014 as shown air above 10.10.5 running and have had installed Boot Camp and windows 7 working for more than a year.  Recently, I tried to boot into boot camp and got the dreaded "No. Bootable Device" error.

  When I go to the startup disk in the settings I see BOOT CAMP Windows option to restart, but I get the above error when I restart.  When I restart and hold down the option I am not isolation presented with the option to boot into Windows or bootcamp.  I can see the boot camp partition in finder and disk utility.  I tried to create an installation disk Usb 2.0 with the latest version of windows software support in the Boot Camp Assistant.  I tried to use this drive to try to repair the disk, but cannot use the touchpad or keyboard or external keyboard.  Tried to use a player great external mac with a windows 7 dvd and had all the same problems.  I tried swapping usb ports and don't have anything yet.  I read somewhere that this could be a problem with the Usb 3.0 ports and drivers with windows 7.  Now I'm at a loss on how to recover it without having to reinstall.

  If I can see the data of the boot partition might be the problem?  I don't know what to do next. Any help would be greatly appreciated.

  Beginning 2014 Macbook Air 6,2

  Core i7 1.7 ghz

  8 GB Ram

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Equium A100: Disc D is not accessible - i/o device error

  I recently bought a box of 50 masterpieces of Mozart CD. I want them on my drive hard, but every so often, I hear the whirring autour CD in drive D: but it then stops and no further action takes place. Equium A100 does not recognize the disc: no disc in drive D:! If I go to my computer and click on D:, I get a warning "D:\ is not available..." I/o device error."

  This only happens with certain CD; others are fine. Could I do something wrong? Any help would be appreciated.

  Peter

  Hello

  > This happens only with CDs; others are fine. Could I do something wrong?

  Hmm in my knowledge, not all CD and DVD are compatible and taken in charge and sometimes could happen that the drive can not read some CD.
  It is not impossible

  Maybe the firmware of the installed disk does contain all the details of manufacturing of CDs and properties and, therefore, the lens of the drive can not calibrate and manage the inserted CD.

  I found in my manual to the user a list of CD and DVD compatible and supported.
  There you should find the different manufacturers that produce a compatible media.

• Dosen't work drive Equium L20-198-IO device error

  HI I HOOPE SOMEONE WILL HELP ME

  I HAVE THIS LAPTOP FOR 6 MONTHS
  EVERYTHING WAS OK UNTIL NOW, MY DVD DRIVE IS NOT WORKING AND I SEE A MESSAGE
  "THE REQUEST COULD NOT BE PERFORMED BECAUSE OF AN I/O DEVICE ERROR

  HELP PLEASE

  Hi Katarzyna

  I studied a bit in the internet and found this useful Microsoft page:
  You receive an I/O device error message when you try to use your CD-ROM drive in Windows XP
  http://support.Microsoft.com/?kbid=891894

  Check this suggestion.