Unable to access the M-AUDIO FAST TRACK PRO volume command afer mounting
Hello
I have a recurring issue.
I installed an external audio workshop (M - AUDIO FAST TRACK PRO) and soon as I did it (immediately), a pop-up message kept appearing at startup with the caption "Cannot ACCESS VOLUME CONTROL".
And now I can not access my volume control, of course and can not see any card available for use.
I saw all the forums on this problem and it seems a repetitive problem on computers laptop toshiba.
I know my way around and have re installed and uninstalled the two drivers from the sound card.
I also tried the trick of Sndvol32.exe with no luck. I can't keep reinstalling the OS whenever this happens.
Someone at - it a real answer to this question?
It is not a question of pilots, or viruses or anything like the usual one.
It is an exclusive problem of Toshiba.
Thank you very much!!!
Vista has an Interface different sound XP, some software needs an update to control the master Volume.
Fast Track Pro to latest version update.
Tags: Toshiba
Similar Questions
-
I am installing a M-Audio Fast Track Pro. It is a USB Audio Interface that allows me to record music. In the included installation, it gave me instructions to update my driver, so it might work. I installed and ran. But when I clicked on the button run the message about Windows logo test appears. The minimum requirements for the installation of the M-Audio is Pentium III 500 MHz with 256 MB of RAM, Windows XP (SP2), Direct X 9.0 c and a USB port. I don't know if it's relevant to my question, but I'm also not how do I know if I have fulfilled these conditions. I'd appreciate any help you can provide. Please and thank you for your time.
You can ask the manufacturer of the software with a signature digital signature that will pass the Windows logo test, but probably do you. Ignore this message and install when even if your computer meets the requirements. Click here to find you info: start, help and Support, computer information, tools, My Computer Information, view general system information on this computer.
-
M-audio Fast Track Ultra not working in El Capitan
Does anyone know if there is a way to get M-Audio fast track ultra I use for my voiceover microphone to work in El Capitan? I used this Fortunately for years and that you don't want to have to go buy another usb device just because I've upgraded to the latest OS. In case I can't buy something, what works best?
Hi PSCAlan,
According to this resource of Avid, the M-Audio Fast Track Ultra will not support on OS X El Capitan:
Audio following interfaces will not supported on OS X 10.11 (El Capitan). The last operating system supported is OS X 10.10 (Yosemite).
2.3.3 December 16, 2014 Take care
-
M Audio Fast Track & Cubase 6 on Windows 8 crashing!
I have a M Audio Fast Track that I had for years on my old macbook with no. deliver it who so ever.
I recently switched to windows, but everytime I open cubase and use the m audio fast track as the audio device after 3-5 minutes, the windows system crashes and needs to restart...
I'm the producer music Proffesional and e studio engineer, and so I can't afford to have that kind of question. Can someone pleas help me
Hi Matt,
Update drivers for M Audio Fast Track & Cubase 6 could help solve this problem.
Troubleshooting for Cubase, Nuendo and sequel on Windows
http://www.m-audio.com/index.php?do=support&tab=driver
However, to get to know the real cause of the problem can you give us the application log generated in the event viewer.
a. go to the home screen. Type in the event viewer.
(b) this will bring up the box of event viewer. Click to open event viewer.
(c) in the left pane, expand Windowslogs.
d. click the application log. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be information. You can see red yellow warnings or errors. If you see a red error, you can double-click on it to bring it and copy the contents into a document.
Please come back with the information needed to get help.
-
Satellite Pro L20 goes wrong with i.f. audio Fast Track USB
Hello!
I used my Fast Track USB on new Toshiba Satellite L40 and I never had any problems with it. I could put a low latency and I did a few songs with him.
Yesterday, I bought another laptop, thinking of recording studio at home. He used the Toshiba Satellite Pro L20. It does not work with my interface. When I listen to music on Winamp or anything on Fruity Loops, I hear strong clicks, pop, noise. They introduce samples, or they appear during playback, or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba more? The only chipset drivers are old, and you can download em only from site Web from Toshiba. The chipset is ATI Xpress 200 M. Its pilots are with the graphics card. Recently I noticed that you can download "ATI Catalyst Legacy Display Driver for Windows XP - card mother/IGP Drivers 9.11" and CRACK to make it possible to install on a mobile device like the L20. Yep it's funny, but its impossible to do otherwise!
things that I have tried and they have still not help:
replacement of drivers #, original were released in 2004. I installed the version.
driver settings #, low latency, high latency
# asio and different settings
pluging # USB interface to another.
# try what happens when I use the battery and when to use the adapter
# update BIOS
# off units such as wifi, card sound card on board
# checked IRQ listpersistent organic pollutants will always appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1, 5 GHz
896 MB of ram
M - Audio Fast Track USB, drivers: 6.0.2Kind regards
Initially, I wonder that you use old notebook L20 now. You have no more L40?
You must understand that the Satellite Pro L20 is older model laptop and also not the best choice for such operations. This laptop is probably designed for simpler day-to-day operations such as the internet, e-mail, office, a little bit of multimedia and that s all the.
I don't mean good old classic doesn't work with your external device, but you will be lucky if someone has the same external device and the same model of laptop and write about their own experiences.
Do you use factory settings or you have installed the own operating system?
-
Firefox is unable to access the internet
Hello
Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.
Best regards
Joel HedestigYou can try using the beta version of firefox mobile?
https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta
-
MY mail server hardisk full so cannot start services & also unable to access the mail server
I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.
Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions. I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago. Can anyone help?
Assume that:
http://support.Microsoft.com/kb/316524
You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/189126
Microsoft's strategy concerning lost or forgotten passwords
What I can offer: http://support.microsoft.com/kb/321305
How to connect to your Windows XP-based computer if you forget your password or if your password expires
-
I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted? I have McAfee Total Protection Plus, but which apparently does not work. Help, please.
This problem existed for about a week.Hello
· What is the exact error that you are experiencing?
· How long have you been faced with this problem?
· Remember to make changes to the system?
It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.
http://OneCare.live.com/site/en-us/default.htm
Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.
Microsoft Security Essentials
http://www.Microsoft.com/security_essentials/
I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.
Malicious software removal tool
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
-
After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.
What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.
If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!
-
We have a Nextbook but are unable to access the Internet at home
We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.
Hi Vernon,
1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?
It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:
http://www.nextbookusa.com/techsupport.php
Hope this information is useful.
-
I'm unable to access the Web site rewards club mail
I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE
Hi BrianSheridan,
1. what happens when you try to connect to the site?
2. you receive an error message?
3. what web browser do you use?
4. what version of IE are you using?
5. are you able to open the Web site in the other computer?
If you use Internet Explorer, then perform the following troubleshooting methods:
Method 1:
Optimize Internet Explorer, and then check how it works.
Check out the following link to optimize Internet Explorer.
How to optimize Internet Explorer
Note: This article is also applicable to Internet Explorer 9.
Method 2:
Also perform the following troubleshooting steps.
Can't access some Web sites in Internet Explorer
Method 3:
If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.
Some sites Web may not behave as expected in Internet Explorer
-
Unable to access the network using Edimax N300 universal Wi - Fi extender
Original title: Edimax Extender will not get internet access
I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet. They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network. EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either. Anyone with any ideas would be appreciated.
Hi Gofchap,
Thanks for the question of validation in Microsoft answers community!
I imagine the frustration you feel when you are unable to access the network.
The problem may be because of the Extender, diverter, or with the network adapter.
1 did you do changes on the computer before the show?
2. do you receive any error messages?
3. What is brand and model computer?
4. have you tried to connect without using the extender?
I suggest you to visit:
Wireless and wired network problems
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?
The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!
Hi,
Thanks for posting your question in the Microsoft Community.
From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.
I understand the inconvenience caused to you. I'll help you solve the problem!
Before troubleshooting, I have little information on the issue.
1. did you of recent changes to the computer before this problem?
Try the methods suggested in the article below and check after each method:
Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry
Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833
If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!
It will be useful.
Maybe you are looking for
-
Satellite L300 - 14G - Microphone volume of very poor quality
Hello I have a satellite L300 - 14G. I would use a microphone.When I connect it to the front, the quality is very bad. If I pushed it there is a lot of background noise.If I don't push it I have to talk REALLY loud to make myself heard.
-
I'm not able to change the screen resolution it is stuck on 640 x 480
I am not able to change the resolution of the screen that he is stuck on 640 x 480, that the slider will not slip and the color is stuck on 16-bitIt's the 32 bit version of vista home premimum I have a 19 in monitor and resolution needs to be changed
-
Running Windows 8, installed all the drivers compatible to Windows 8. After the system enters sleep state and resumes that no USB device is detected only after a full reboot.
-
Conversion table, EDD, manage multiple formats table
Hello! I'm quite new to structured framemaker and I plan to migrate legacy documentation not structured in XML format. In documentation existing as well as ordinary tables I Note and warning messages in a table:The icon is a paragraph with a frame hi
-
Branching - how to go back 2 slides - or a slide of the Moose
HelloIf all goes well, I'll be pretty accurate .As you can see on this slide, I have a clickable top menu (TOC, LinkedIn, people to call, resources and output).When we click on resources, anywhere in the course, the learner lands on this slide:Then,