Unable to activate the constraints!

Similar Questions

• Unable to activate the Windows Firewall, code 0x8007042c.

  Hello

  My name is Giovanni.
  I have problems to activate the firewall on this laptop. I tried activating the firewall from the Control Panel, but I get the error of 0x8007042c code
  I also tried the solutions provided at the following URL: http://support.microsoft.com/kb/2530126. None of them worked. Method n ° 3, suggesting to start the firewall manually by going into services.msc, I can't go through with this method because I don't see that the firewall Windows listed in the services. What can I do to get the firewall working again?

  Hello

  I suggest you to upgrade on the spot to solve these problems.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: make sure you backup all your data before you run the repair facility.

• Unable to activate the track for recording?

  The other day, I went from a PC to an iMac. When I try to record a voiceover in Premiere Pro, it only allows me to activate my track for recording. In fact, I can't even click the button. I use a Blue Snowball USB microphone. Here are the screenshots of my settings for inputs and outputs. I read so many posts on the forum and articles related to it, have changed a few things, but have had no success. I've never had this problem on my PC, so it's mind-boggling. Does anyone have any suggestions on how to fix this? I'm sure that there is something that I completely forget, but I'm stumped. Thank you so much in advance!

  

  

  

  

  And you also see modulation like you talk here:

  

  Just to clarify - your only way out is to not be able to activate the recording of tracks?

  Can you check they type of audio track, you try to save on matches of the microphone (mono mic - mono track)

  If not, go in the menu sequence > add tracks and add a single track:

  

  and see if the voice on the recording.

  MtD

• Unable to activate the plug-in for WebStageView.

  I couldn't activate the plug-in for a StageWebView using loadURL().

  I use Flash Pro CC 2014 on Windows.

  My environment variable are on:

  AIR_ANDROID_SDK_HOME C\:\\SDKFile

  ANDROID_HOME C\:\\SDKFile

  These files are located in C:\SDKFile but according to Android Studio, the path is C\:\\SDKFile

  I'm targeting Android SDK version 4.0.3 and uses a Samsung S3 with 4.4.2

  This is included in the XML Application:

  < android >

  < manifestAdditions >

  <! [CDATA]

  <>Manifesto

  < application android: hardwareAccelerated = "true" / >

  < android:name="android.permission.INTERNET"/ uses-permission >

  < uses-sdk android: minSdkVersion = "15" > < / uses-sdk >

  < / manifesto >

  []] >

  < / manifestAdditions >

  < / android >

  
  

  Any idea what I might hurt?
  

  var webView:StageWebView = new StageWebView (false);

  webView.viewPort = null;

  webView.dispose ();

  webView = null;

  webView = new StageWebView (false);

  the 4 previous lines of code are superfluous.

  webView.stage = this.stage;

  webView.viewPort = new Rectangle (0,(100*Wscale), loaderSprite.width, loaderSprite.height-(100*Wscale));

  where are the Wscale and loaderSprite defined?

  webView.loadURL (URLVariable);

• Unable to activate the session in OSB. Permission denied.

  Hello
  
  I was able to import my jar file properly. But when I activate the session, I had this error on sbconsole:
  Permission Denied.
  
  When I checked the server logs, that's what I got:
  
  < WARNING > < ConfigFwk > < BEA-390101 > < transaction definition "205" as restoration only. Reason for cancellation:
  java.io.IOException: permission denied
  at java.io.UnixFileSystem.createFileExclusively (Native Method)
  at java.io.File.createNewFile(File.java:883)
  to com.bea.wli.sb.resources.archive.ArchiveResourceRuntimeManager$ ArchiveResourceLifecycleListener.createJarClassLoader (ArchiveResourceRuntimeManager.java:109)
  to com.bea.wli.sb.resources.archive.ArchiveResourceRuntimeManager$ ArchiveResourceLifecycleListener.onCreate (ArchiveResourceRuntimeManager.java:293)
  at com.bea.wli.config.impl.ResourceListenerNotifier.sendChangeNotification(ResourceListenerNotifier.java:266)
  Truncated. check the log file full stacktrace
  
  I don't know that I have installed OSB as user root. I also followed some advice from this thread: Re: impossible to activate the session in OSB: java.io.IOException: Permission denied but still can not solve the problem.

  Hello

  First try step 1.

  (1) make sure that your user ID has access to write to the tmp folder (probably / tmp). If you want OSB to write in a different location from tmp OSB/Weblogic, you can specify the following setting in the server argument list:

  -Djava.IO.TMPDIR=/yourfolder

  (2) make sure that the user that you use to start the OSB has ownership on all files in your domain.
  -Login with your user in a shell session
  -Change the directory to your domain name
  -chown-r *.

  Make sure you get no exception

  Kind regards
  Fabio.

• Unable to activate the management network...

  I'm new and VMWare VSphere and I tried to connect to a server with VSphere ESXi 4 but I kept getting hung up on the screen «Download tools to manage this host From...» ». I disabled the management network, hoping it would allow me to bypass the connection and enter the server, but he clung to the option 'download... Tools '. "the screen again, but this time with a 0.0.0.0 IP. I tried to activate the network again, but now I get the error, "Management Network Interface was not found". I don't know what this means and I'm having a devil of a time to discover.

  Hello

  The screen you see (yellow screen with 'download... Tools) is the screen of the ESXi server. to manage the ESXi server and the virtual machines installed on it, you need to connect to a windows box, navigate to the IP address (using a web browser) indicated on the yellow screen and then download the VSphere client tool, of course ensure your network working properly. The VSphere client tool will then connect to the ESXi and manage accordingl.

  Hope this helps

  James

• Activate the constraints in parallel

  Hello
  
  I'm trying to import seedlings.
  In our environment data warehouse to constrainta during the import takes a lot of time... To improve the performance of this step, I created constraints separately added script parallelism in all commands (for example: change the table x 1 Add xc1 constraint.. .enable parallel 4 ;))
  
  I changed the degree os paralllelism of each table for 4, I've included after command at the beginning of the script.
  
  ALTER session force additional DOF parallel 4;
  
  Yet the constraints are not being activated in parallel.
  How can I make these constraints enable step uses paralllelism.
  This is another way to improve allow performance constraint when importing.
  
  We are on 10.2.0.4... Benani solaris 10 and we use the data pump.
  
  Thank you
  Pramod

  In order to expedite import use exclude = statistical parameter
  See this link to allow the index

  http://www.asktherealtom.ch/?p=214

• Unable to activate the Windows 98 operating system.

  NEED TO ACTIVATE a GATEWAY WINDOWS 98 os

  I have a vintage computer laptop gateway 1998, and I need to reload the operating system.  Microsoft won't activate and gateway can restore disks not power gateway.  What should I do?  is there a product key generic that I can use to load the operating system?

  There is no activation condition in Windows 98 (activation only introduced with Windows XP).

  You need the original key - probably on the COA sticker on the case of the machine.

• I bought a refurbished computer and I am unable to activate the validation code is wrong.

  Original title : I bought a computer refurbished with xp on it and a 'new' disk xp.

  When I need to reinstall, I couldn't activate it because of not being able to see the code. I now have new glasses, but he says that the validation code is wrong. I tried to call and was told that the code was wrong. Do I use? I just want to use my computer.     I guess I should mention that I can't on the xp unless it is already validated. I am writing to you on my other computer.

  Hello

  ·         What is the brand and model of the computer?

  If you are not able to view the activation code, I suggest you to contact the manufacturer of the computer for the activation code, also I suggest you to follow the form of measures troubleshooting section and check if that helps.

  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247

• Unable to activate XP product key

  Computer with Windows XP Media Center 2005.  It work yesterday and got a message saying: "this copy of Windows must be activated with Microsoft before you can log on."  Tried to activate the wizard activate over the internet.  Tells me that the product key is not allowed.  Tried to activate by ' phone.  Tells me that they are unable to activate the product and put an end to my call.

  I contacted the manufacturer of the computer (Packard Bell).  They tell me that this is a problem with the operating system.

  I use this computer for several years with no problems and was never asked to activate before.

  What can I do?

  Thank you.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx (this site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  JS
  Http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

  airplance mode: off

  WiFi: connected.
  Bluetooth: off
  Ultrabook ASUS, bought on 14 April 2013
  Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
  Unable to activate the device.
  Basic troubleshooting done:
  1. reboot the PC
  2. activate and deactivate the airplance mode
  3. put updated driver
  Impossible to activate bluetooth
  error message: windows could not activate the device.
  tried steps 1-3 again me. same message showed.
  no other device is connected via USB when trying to enable bluetooth.
  known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

  Hello

  Thank you for the update.

  As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Feel free to contact us for any other questions related to Windows.

• Impossible to activate the DC AA after the end of the trial period. Chatted for an HOUR and she had windows setup error. Cat then "referred to as specialist ' and chat over on that date.

  I'm a little ANGRY. I have AA X that allows me to update and buy AA DC.  I bought DC AA after the trial period.  I was unable to activate the program.  Chatted with representative for 1 HOUR. She did just what I had done on several occasions to get Adobe Acrobat DC activated and failed. She did a good job that she finally got the Windows Installer error: "this installation package would not open. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. "Now there is no way to use even the DC AA naked without the tools. Any Suggestions?

  Hi amysuet1983 ,

  Please try the steps suggested in this KB article:- wrong 1635 on a fix when installing Acrobat 8 or Reader 8

  If the problem persists please check with the other user account with admin rights to reproduce the problem, check with this article:- Troubleshooting from Adobe: create an account to administrator in Windows

  Let me know how it goes.

  Kind regards

  Christian

• Unable to prepare the host to Vcloud Director

  Hi all

  Hope you guys can help me. I try to install the track of vcloud Director version, and I got most of this work. The problem I have now is that I cannot prepare a host. I installing the server in a cluster, I have no shared but only storage using local disks (wondering if this isn't the problem). I added my vcenter server, which is a virtual machine on a host, but I'm still unable to activate the host for its use.

  I read somewhere on the forums that it must be in maintenance mode, but it does not work. In fact if I do this, the host gets a Red Cross in the available column. On the only host I get an error saying connection refused. The other, they say just can't prepare host.

  Any help would be welcome.

  KettieKop

  You need to meet the prerequisites first, specifically to have active DRS.  For the active DRS on the Cluster of hosts in vCenter, for the DRS, you need to have more than one ESX host AND the shared storage.

  Shared storage is a requirement for vMotion (as the DRS is on your virtual machines for load balancing)

  Several hosts is necessary to allow pools of resources (you need a place to load their balance)

  Once you meet the requirements, then you should be able to view the ESX host, when you try to prepare them for vCloud Director.

  Best regards

  Jon Hemming