Unable to boot after Windows update

Similar Questions

• Unable to boot after Windows 7 update

  Product: HP Compaq 6000 Pro format microtour

  OS: Windows 7 (not sure 32 or 64-bit)

  I installed about 15 Windows updates last week, some of them is critical, then restarted and the computer was fine. This morning my computer was slow, so I restarted, and now I can't start. He keeps go to boot menu options. I tried...

  -Safe Mode

  -Mode low resolution

  -Last good known Configuration Mode

  All of these options to the same start menu cycle.

  HP Startup Repair finds problems with the disc, says he corrects, finishes, but doesn't change anything. Back the same start menu.

  I tried removing battery from motherboard and BIOS restore to factory settings - or solved the problem.

  Finally, tried to restart from the disc installation, but apparently for HP there is only the option to restore the default settings (erase all data) and no possibility to repair or return to an earlier date. I really, really, want to lose data if possible.
  
  Any ideas?

  RESOLVED: Ran Startup Repair, but this time took so I could look at the newspaper.
  
  Root cause found: System on the disk volume is damaged.
  Repair action: file system repair
  Result: Completed successfully.
  
  Yes!
  
  Still, would be nice to know if it can be avoided in the future.

• Empty (black) screen boot after Windows updates

  I had this problem on two computers this week... until now. Run windows update after I restart the computer. When the computer reboots, they can start to a blank screen (black). These were not updated video card basis. Also, I tried to use the safe mode, but it crashes on MUP. SYS. I ran chkdsk... and who has not fixed it. Any ideas other then a new installation? Thanks for your help!

  Kevin_C_K,
  You said you ran chkdsk and it didn't fix it, but it will report all the problems?
  If you are still having this problem here is a couple of things to try (if you haven't already done so).
  Run the sfc/scannow utility.
  When you have run chkdsk if you do not use the /r switch, then repeat the it like Chkdsk/r

  After the clean installation, update you all hardware drivers before you start the Windows updates? Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BLUE SCREEN: UNABLE TO BOOT AFTER THE UPDATE OF ROUTINE WINDOWS XP

  Today, I was asked to restart my computer for the updates be taken into account (not my choice seemed automatic).  When I went to turn my computer back on later, it went straight to the blue screen.

  Therefore, Windows cannot restart once again! It stops at the blue screen with the following message:
  
  A problem has been detected and windows has shut down to prevent damage to your computer.

  Technical information:

  STOP: 0 X 0000005 (0XC0000005, 0X7D7FBB28, 0XF89203BC, 0XF89200B8).

  Then, when I hit F8 and went through all the options (trying to get into safe mode), the blue screen just kept coming back and the last time, he had these codes:

  STOP: 0 x 0000005 (0 x 80000003, 0X8053355E, 0XF8A553BC, OXF8A550B8).

  I tried all sorts of relaunch option namely mode security etc.  but all comes down to the blue screen.

  Can someone help me?

  See this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1?prof=required

• Unable to boot after the update

  Nice day. Today I installed an update, but my power is out (are lucky me).

  Now my player starts and takes forever but expires and stops. I started in utility mode to reinstall el Captain but it shows my drive as locked. So I go to utilities to try to unlock the he but no hard drive does not appear (even if they do when I'm trying to reinstall from the web).

  I have a TM backup but it cannot find all the disks, so I can't pick it up to do a restore.

  An option or patches? Boot hd is in a year.

  Thx for any help

  Network reinstall of El Capitan

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. When the load utility Menu select install OSX.
  4. Click the continue button.

  This should reinstall OS X on the existing system without erasing the disc.

• Unable to boot after Windows logo

  original title: My Vista Basic Edition open habit. As soon as Microsoft logo lights, my computer gives a Windows error message.

  Before my computer crashed, he was downloading 12 'important' files from microsoft. When it restarted, it began to open with the logo of compaq, then, the windows logo, then I get a "Windows error" message.  He said that I should reinstall Windows disk.  My computer came with a preinstalled on vista. I used the recovery disc that I bought from HP to restart the computer. I made sure the start setting would be on the CD mode first (from the site of Bios). When I tried to reboot, it would have read always not the recovery disc. I got some tips on this Web site about what to do, and he said to recreate a Windows recovery disk. I did as instructed, and yet with this new disc, my computer won't get past stage logo before a loop is executed by restarting itself. I can't get into safe mode, I can enter the BIOS mode, but clicking on reset default (f9) does not solve the system. It says there's something load in my computer - I can't fix because I can't past the point of the loop. can you help me please?

  Restart your computer and press the F8 key until you reach the Advanced Startup Menu of Options. Select Safe Mode and System Restore. If the problem persists, restart the computer and press the F8 key. When you reach the menu Advanced Startup Options select turn off automatic error system reboot. Restart the computer normally and post the error here.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• I am unable to do the windows updates. My computer States tries to install 1 of 25, but no progress.

  I am unable to do the windows updates. My computer trying to install updates, but is blocked to install 1 of 25 updates.

  What should I do now?

  Thank you very much. I solved the problem using Fixit after a suggestion of TaurArian.

  Also, he told me how to not to receive other suggestions.

  Thank you for your help.

  Susan J.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• Laptop Presario CG56: CG56 crashed after Windows Update

  After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

  I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

  Help!

  Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

  Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.