Unable to connect after firmware update

Similar Questions

• Unable to connect to the updates of Windows

  I am unable to connect to Windows update.  I use VISTA and receive the following error message:

  • Updated Windows cannot currently check the updates because the service is not running.  You may have to restart your computer.

  I rebooted several times without success.  Also, I update is enabled, so I'm at a loss to know what to do.

  Your output indicates a problem with the BITS service.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and menu file - import and bits_vista_32.reg of importation.

   

  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 171

   
  It should work on 64 or 32-bit vista.

  Reset.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  SC config BITS start = demand
  SC start BITS
   
   

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• SOLVED: Slow wireless internet passthrough after firmware update

  If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

  I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

  Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

  EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

  Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

  I tried this... still slow passthough wireless speed.

  The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

  I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

  I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

  Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

  UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

  However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

  BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

  And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

  http://www.Speedtest.NET/my-result/4078979293 (laptop)
  http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
  http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

  but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

  But now everything works (at least for now).

  P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

• WRT 160N V3 - signal drops after Firmware update

  Hi I recently upgraded the firmware on my wrt 160N v3 and changed security WPA2 Personal wireless from WEP (I needed to do this to get the speeds of a purchased wireless adapter recently).  Now the router stops transmitting a signal intermittently for about a minute before returning to the line.  The time between drops is also not the same.  Before updating firmware (and change security settings), the router has been solid as a rock.  Any suggestions on how to fix or maybe where I can get the old firmware version (which seems to be more stable than the current version)? THX

  You mentioned in your post that you updated the firmware. So, after firmware upgrade reset you the router? After the successful update, you need to reset the router. It is recommended to reset the router once. Steps to reset the router:

  Press the reset button on the router for 30 seconds, turn off the router, wait 30 seconds and then turn it on. Power light should blink when you perform the reset process.

  After reset, reconfigure the router, and then check the status of the connectivity.

  If the issue still persist then yry the following parameters:

  # Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

  # Click on wireless tab select the channel wireless at 6, 9 and 11. Click on save settings.

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2307 RTS threshold

  Then reconnect to the wireless network and then check the connectivity status...

• Speed drop after Firmware update WRT54G2 wireless

  I have a WRT54G2 V1, which began to do a lot of loss of wireless signal, the wired computers are always connected to the net, completely wired computers lose the connection. I decided to try an update of firmware for 1.0.04)is Build 5. and the flow has fallen by 2 members! The wired computers have the same speed of connection as before. I feel is one of the parameters of connection in advance, don't know how tweek. I already went through all the different voltages without success.

  Help!

  So all settings are the same after the update of the Firmware but I went a head and did a reset and all, still half speed re-admitted. It fixed by a new round of power. Also since updated the firmware and reset have not had problems with the router stopping broadcasting either.

• Unable to connect to the Update Center

  I just finished my fifth unsuccessful attempt to install jdeveloper 11.1.1.4 on a laptop from scratch. I already had a 11.1.1.3 installation and work of the need to upgrade to 11.1.1.4 to align with the SOA server I have deploy across the network.
  
  I removed 11.1.1.3 and 11.1.1.4 facilities (via windows install/uninstall program, and then manually deleting directories that they were in), and then try to reinstall several times, remove after each unsuccessful attempt).
  
  My problem is when I try to install the extension of SOA. After the initial installation of the software in JDeveloper, I'm going to "Help"-> "check for updates... ».
  Rather than see a list of locations to update I get a popup on top of the Update Center popup, which claims that it is:
  
  Unable to connect to the internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your settings of proxy below and click OK to try again.
  
  Normally, I use a url of proxy auto to manage my access to the proxy for that so I'm VPN would be in my company or not, Firefox handles my access network correctly. Because it is not an option in the context menu, I found a proxy host and tried to use it while I was VPN in. That has not helped - I tested the proxy of the popup and it failed. I Redid the installation 2 - 3 times while only had in VPN, then abandoned.
  
  So I uninstalled everything, disconnected VPN and did another fresh install. There is also no in the same way (Nothing in the center of update list and I got the same error popup).
  
  It's a mystery all that JDeveloper is really doing. It makes me crazy when the software works not seamlessly like this. I don't see what it is really doing, and the error message is useless or worse. (Why is she even suggesting that I provided a proxy when I'm straight on the internet. Why didn't he just tell me what he's trying to do, and, if I can fix it). I have a fine Internet connection that works for everything else.
  
  I know JDeveloper is still caching configuration information (my two projects appear in the list of applications), and so I guess that's also implementing caching some old login information that it does not show me. But I find no visible which erase and start over.
  
  Anyone know how to get JDeveloper to just try to connect directly to find update centers after that he cooked the old way to do it in a file somewhere hidden?
  
  Thank you

  Hello
  If JDeveloper is installed successfully, then you are good to go. Come to the addition of Extensions for SOA, BPM etc, you can do this either online (directly and update the Oracle site) or offline also. Average offline, first download the corresponding ZIP extension files for your version of 11.4 JDev as a composite model soa, bpm, Publisher etc. Then click on help-> Check For Update-> ignores errors or the pop-up windows and cancel-> them on the screen main down check the box named "install local file". Here browse and select a zip file at a time and move forward.

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.SCA.Modeler (Oracle SOA Composite Editor-> 11.4)
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.BPM.fusion.Studio (Oracle BPM Studio-> 11.4)

  For SOA/BPM, simply just above 2 extensions.

  Thank you
  Ravi Jegga

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

• As he tried to update 8.0.1 firefox is unable to connect to the update server.

  After getting the prompt to update 8.0.1, Firefox cannot connect to the update server. I've never had a problem connecting to the previous updates in the past. I'm running OX 10.6 and the currently installed version of firefox is 7.0.1.

  try to install Firefox 8 on top of Firefox 7, or

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles

  here explain how to save the profile

  • https://support.Mozilla.com/en-us/KB/backing%20up%20your%20information

  here explain how to restore it
  

  • https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• 32TL933 - in places of Toshiba Youtube app not working after firmware update

  I started having a problem since the latest firmware update on my 32TL933.

  Everything worked fine until the latest firmware update.
  Since then, when I connect to Toshiba Places, everything works well except Youtube.
  When I try to access Youtube, it shows the Youtube Logo and stuck on it...

  I would appreciate if someone tell me how can I solve this problem. YouTube are the only thing that I used in places of Toshiba, and now, I can't, it's frustrating cause I have this TV since August!

  Have you tried remove the Youtube app, and then add it again?
  Try this!

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• Qosmio G20-127: after firmware update cannot burn CD or DVD

  I'm updating my firmware from F101 F102 to dvd so I can't copy any CD or DVD in my drive also some CD & DVD cannot be played after this update, I tried to
  install the old firmware F101, but I can't so please help me?

  Thanx

  Hello

  How do update you?
  Before update you the firmware, follow this:
  -Always use AC adapter to avoid a power off by updating the F / w.
  -Do not turn on DVD + r / + RW/RAM DRIVE by updating the F / w.
  -Put an end to all applications except the F/W update of the program.
  -Are not completed with force the F/W update program
  -Be sure to manually restart Windows after completing the update.
  -Update program automatically eliminates the ineligible disks

• Toshiba 47M7463DG no clouds do not service after firmware update

  Hi all
  I have a problem with my Toshiba 47L7463DG. Services (accessible from the Home button) Cloud stopped working after the recent firmware upgraded. Is there something I can do to return to the previous version of firmware or solve this problem?

  Details:
  Toshiba 2014-051
  May 21, 2015
  Version of the 8.1.97.09.01.1 software
  MBoot Version 00813201
  Shipout G

  Thanks in advance.
  hysten

  After each update of the firmware, reset the TV.
  If you don't, I recommend you perform this procedure...

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• Sansa Fuze - insufficient volume after firmware update

  After the latest firmware update to its maximum volume looks like a whisper. And the configuration of the System Volume option disappeared! Thought that this setting is set to Normal and should change at the top. But the Volume option no longer exists. I use the same set of headphones. Any ideas? Can I go back to the previous firmware? or should I get another MP3 player? Whenever I update the firmware, I have all sorts of problems! All the presets radio disappear as well! But the problem of volume is the most boring... Thank you all in advance.

  Why throw the baby out with the bath water?  Let build .31 on the device and set your locale.  Choose reset to factory settings, choose in North America and your preferred language.  For Europe, you will need to do is choose "rest" for your steps of FM frequencies.

  Note: You can leave the current version of the firmware installed on the device (build current est.31 ou.33 according to the revision of your device).  Once you select 'Yes' for the mask to reset factory settings, the unit will ask you your desired area.  For the EMEA region, do not forget to go to settings > Options Radio > region and select Europe for the stages of EU frequeqncy.

  I just wanted you to save a lot of hassle!  Your volume option will be available again.

  With regard to the volume, please use good judgment when you listen to your music.  Keep the volume at a reasonable level, because your audience in the long term is much more valuable than a little loud music.  If the device is for the kids, well, as a dad, I know how they are.  Perhaps the limited volume can be useful for once.  You can blame on the EU regulations.

  Bob