HP 10 g2: help with sd card reader

Similar Questions

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory

• X 230-problem with Driver card reader

  Hello!

  I found a bug with the card reader Driver. I use Windows 8 x 64 and with installed Driver card reader, I often have a high CPU usage after waking from stand-by. It is caused by the SYSTEM process. In investigating this, I discovered that it was caused by the module of the driver for the card reader. I uninstalled and you have no problems since.

  Am I the only one to go through this and I have no disadvantage to uninstall this driver?

  Hi TPuserX100e,

  I'm glad you found the cause of this! I experienced it myselfand so far have not noticed any bad Effect to use the generic driver.

  I hope this helps!

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• Dell XPS 8700 Windows 10 questions with SD card reader

  Hi, I bought a new Dell XPS 8700 three months ago.  It comes with Windows 8, even if I asked for preinstalled Win10.  The Win10 upgrade process was fairly straightforward.  However so far three times the SD card reader stopped working.  I fix it by reinstalling the drivers.  Its not working again and my USB stopped working also.  Is there a background process that interferes with USB / SD card drivers?  Anyone else noticed this behavior.

  Rgds Frank

  You can try this:

  Go into Device Manager, and then double-click the entry for your SD card reader. Assuming that he has one, click on the power management tab, and uncheck the box 'allow the PC turns off... ». Now, do the same thing in Manager of devices for all your USB root hubs.

  Then go to the options screen to win 10 powers, click on advanced settings and turn off hybrid sleep. Reboot and see if that helps.

• Re: Satellite A200 with Windows 7 - the problem with the card reader

  I upgraded to windows 7 and now my card reader does not read some of the maps. I installed windows vista (utilities SD) card readers drivers but I can't install the flash cards support utility. in the installation is displayed: "serial number is invalid '.
  What can I do to solve my problem?

  Thank you and sorry for my English

  Could you give a product number? The product number is located on the underside of your laptop and looks like this for example: PSAE6E.

  Post edited by: Osman

• Satellite A200 problem with SDHC card reader

  Hello
  in my notebook, I had two OS, Windows XP Pro 32-bit and Windows Vista Home Premium 32 bit and Win Xp card reader work well, read all types of (standard and HC) SD cards but in vista to read only the standard map: (.) I have install and tryied all drivers form my laptop and nothing: (.)
  My notebook and SD card is: Satellite A200 - 1IW PSAE6E and SDHC 4 GB Kingston.

  You have installed Vista SP1?

  Try this fix: http://support.microsoft.com/kb/949126

• Portege 2010: How to get more 2.2 MB/sec with SD card reader

  Just out of curiosity: someone at - he managed to get more than 2.2 MB/sec sustained the respective rates of reading their SD cards?

  Unfortunately, I have access to a card of 1 GB bytestor who performed relatively poor. Could be a performance improvement if you place the pagefile on this map (could be demanding STR around 6 to 10 MB/s, I guess).
  So, experiences?

  Hello

  In my eyes software updates won't help you to improve the speed of read/write
  The speed of the SD cards depends on the model of SD card.

  For example the Secure Digital 133 x is a high speed version of our card designed for digital photography enthusiasts and pro-sumer.
  It depends on speed of reading speed of 21 MB/s and writing of 15.5 MB/s

  But the problem is that not all SD cards are compatible with the drive of the laptop.
  Before that you will buy such card SD functionality verification

• A60 - 672 HELP with graphics card

  I want to upgrade my graphics card but know nothing about it here my laptop

  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&PRODUCT_ID= 97189 & DISC_MODEL = 0

  And this is the card that I want to buy http://www.microdirect.co.uk/ProductInfo.aspx?ProductID=12039

  it fit my laptop and it will work
  any graphics card will fit my laptop?

  any help would be great thanks craig

  Hi Craig

  First of all: you can t put all graphics cards in this book. You can't compare the laptop with desktop PC! The graphics card which is placed in the laptop looks like a small chip and is mounted on the motherboard. You will not be able to put this big monster in Notepad.

  Generally it is not possible to upgrade the components such as the processor or graphics card. Only what you can replace are the modules of memory, HARD drive, or a drive.

  concerning

• Need help with identification card WiFi Acer Aspire V Nitro VN7 - 792G - 79 LX

  I just got an Acer Aspire V Nitro VN7 - 792 G - 79 LX that I bought recently a few days ago. I'm not thrilled with Windows 10, so I installed Windows 7 x 64 on it, instead. I only had a chance, until I had to go to work (I drive a semitrailer tractor for a living, and I am currently on the road), to find Windows 7 drivers for the network Realtek card in it, and I now need to find Windows 7 x 64 drivers for the WiFi card. I need help to identify the make and model of the wireless card that my laptop has, because when I go to the Acer website and enter my serial number, then search for drivers, it lists drivers for WiFi cards of 4 or 5 and 2 different Bluetooth drivers.

  I'm sure that my Nitro V17 has an Atheros WiFi Qualcomm card, and I found the information on another site (no Acer) that my card Atheros WiFi Qualcomm model number is NFA344.

  Anyone can check that it is correct?

  Thank you!

  Yes, sometimes setting Legacy can pose problem hardware/drivers.

  on ACPI\MSFT0101, try this:

  https://Downloadcenter.Intel.com/it/download/23091/Intel-me-9-driver-management-engine-1-5-MB-di-int...

  topic of IUSB3\ROOT_HUB30 & VID_8086 & PID_A12F & REV_0031 & SID_103B1025, try this:

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-control...

  on PCI VEN_8086 & DEV_A170 & SUBSYS_103B1025 & REV_31

  It's the technology Intel (r) Smart Sound but I can't find a driver for windows 7

• BlackBerry Smartphones need help with sim card switch

  I'm changing the SIM card in my bb... it s the same company & only is done I need to move to a broken iphone 3gs. When I put it in the bb, I can make phone calls & have access to the web but my bbm works at all! I tried to reset, upgrade the operating system, are some of the things that I tried to have this sim card work in this phone. If anyone has any ideas on how to do this switch pls pls help!

  I'm with fido, is a bb unlocked Rogers & has been working wiith my fido org chip since I got it. I'm putting a ship different fido in.

  Thanks in advance!

  Finally I knew an iphone SIM will not work and you should get a new

  You may need to call your carrier to get a BlackBerry data plan added to your service

  You can try this

  On the handset, go to:

  For OS5 and 4.x
  Options - Advanced Search - host Routing Table
  Click on register now and escape from the home page.

  For OS6 and above
  in options, advanced, feature host routing table, click on the menu and select Register now.

  Wait 2 minutes and see if the network registration occurs.

  Return your books to your BIS service provider site:
  Of your handheld: http://www.blackberry.com/btsc/KB15402

  Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service books.

  Your desktop PC: http://www.blackberry.com/btsc/KB02830North American carriers - scroll to select your carrier
  Carriers worldwide - find your operator from the list

  3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.

• Need help with the error "read-only or another user may have open.

  Hi all

  just a background on what's going on. I do not have adobe acrobat x standard, the most recent version. I get an error everytime I try to edit a document.

  I add pages to PDF which is on my computer, it does not allow me to save the file after the addition of pages without giving me this error "the document would not be saved. The file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  I have to then save it in a separate file and delete the old and replace it with a new one. I'm having the same problem with the files on my server, and I thought at first it was only the files on my server but it does with files directly on my machine. Very frustrating and I cannot understand why.

  I tried to go in editing-> Preferences-> general-> under Application startup to disable "Enable protection mode", but the option is not there yet.

  Please help someone, I can't understand a solution for this.

  Thank you.

  !!!!!!!!!!!! Thank you!!!

  It drove me crazy!

• Help with graphics card

  Hello

  I currently have the graphics card Nvidia GEFORCE GT 610 and am looking for a better card (for AE CC), it takes forever to render / apply effects and other basic tasks.

  My specs: windows 8, intel core 2 CPU Q9300 2.50 GHz RAM - 4.00 GB system type: 64-bit.

  I would be grateful if you could help me with this.

  Thank you!

  The GPU has almost nothing to do with improving the performance in After Effects.

  Spend your money on CPU, RAM and a fast SSD before you even consider spending money on a GPU so performance in After Effects is your concern.

  See this page for resources to make After Effects work faster: http://adobe.ly/eV2zE7

• Help with credit card!

  Hello

  I'm finalizing my order on the plan of a year of Muse, but the system won't let me choose the expiry date year-list of fields in the details of credit card. It seems that the list is empty. I have this problem for 3 days and I have a crucial project for the customer's Web site.

  Thanks in advance for your prompt response

  Ploutarchos Chiou

  Have you tried using another browser?

  You need to contact Adobe technical support by chat or phone.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• Need help with TS to read the list of variables and/or LV

  Hello

  I use Labview adapter in Teststand to open WinIDEA and read the values of the variables. Basically LV lib files are used to read the value of the variable at run time, and returns the value of the variable. Contribution to this labview function i.e. variable name string and output type cluster.

  I need to read the list of variables and compare it to the value limits for each variable. I perhaps need to read at least 50 to 60 variables in one step if possible or a variable at a time in a loop. I want to add these variables in a txt file with the limits and read of Teststand as a string array and compare the result. In this way is easy to add or remove variables from the list and therefore their expected value. I tried to use the shipper of the property, but there need a stage name or local/global variable.

  Another way is to add the code in labview for comparison of variables value read, then I lose teststand power and flexibility.

  I am struggling to find the best way to achieve this. Any ideas?

  I would like it.  Basically, you have a file limit with 2 data tables.  A table contains your variables and the other your limits.  Then you wrap on a test of a string value.

  Let me know if you have any questions.