Unable to connect external HARD PX1267-E on Vista drive

Similar Questions

• I connect external hard drive to crush

  I have a disc external hard - is possible to connect to my crush on the MacBook Pro and it moves faster when it connect to the USB port?

  You can get a bolt of lightning > USB adapter, but it will not be a more quickly as the connection from one player to a USB port on the Mac unless you use several USB drives to a USB connection.

• Computer does not start with connected external HARD disk

  Although my BIOS doesn't look like another hard drive, when I start my computer with the external hard drive, the main computer shuts down until I have disable externally. I want to have external to back up automatically but can not have both to play well.

  Help!

  Hello

  The same thing happened on my laptop with a connected external printer.
  I was not able to turn on the laptop until I unplugged the USB printer.

  Well, I checked the BIOS which controls the start and put the HARD internal disk to the first position!
  Try this. Maybe it helps. Otherwise you will need to disconnect the external USB HDD til the operating system has started

• Unable to access external hard drive.

  Orginail title: G: is not accessible. ?? Windows 7

  I have an external hard drive of my passport.

  . I have Windows 7
  The computer reads but cannot access it.
  I did some research and saw that cmd-chkdsk g: /r is working to fix it.
  I did the other day, after a while, it seemed that it worked. (treatment and removal of some files)
  But my gf unplugged the hard drive!

  I tried a few times, and now he is just like that ' master file table corrupt.» Windows will attempt to recover the master files of the disk table.

  Its been sitting there for about an hour, nothing is has been updated or changed.
  Is there a way to return to the old cmd of before, like restart the process?
  Someone at - it suggestions?

  Hi Ryan,

  Welcome to the Microsoft community.

  I understand that you are unable to access your external hard drive. We will help you solve this problem.

  I suggest you disable the disk activity control. Follow the instructions to disable the disk check.

  1. Command prompt opened with administrator.
  2. Type chkntfs /x c: g:
  3. And then restart the disk check process

  If the problem persists, follow the method below.

  Method 1: run the auto repair by using the installation media and check if it helps.

  1. Insert the bootable (USB or DVD) media and restart your computer.
  2. Press the F12 key (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.
  3. Once the Windows Setup window appears, follow these steps:
  4. Click next and select repair your computer.
  5. Click Troubleshooting option, and select options in advance.
  6. Click the automatic repair option.

  If you do not have installation media, then create a referring to the answer of Mr. André Da Costa.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/where-can-i-download-Windows-7-ISO-i-have-a/7d964b05-2be9-4800-BC7F-3ca30356fc3d

  It will be useful. Let us know if your problem is solved. For further information, feel free to contact us.

  Thank you.

• Back up and Restore Center - unable to save external hard drive Iomega - get code error 0 x 800700022

  Hello
  I used my external hard drive (Iomega) once, about 8 months ago to save the files on m y HP laptop.  I tried these last days to support again (I know, I should have backed up regularly!), but whenever I try, I get the message that I get an error code 0 x 800700022

  I have Windows Vista on my laptop. I don't know what you need to know. The hard drive will allow me to recover the files that I have already backed up to it, I can just put more on it.

  I hope someone can help me, thanks!

  Kristy

  Hi Kristy,

  1. have you as any message with the error code?

  Step 1:

  I suggest that you follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/kb/951002/en-us

  Step 2:

  Check your disk for errors.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/bff71aac-c78e-42bd-a959-116019c93478

  THIRD PARTY LINK WARNING

  WARNING: Microsoft does not provide any assurance or warranty, implied or otherwise, and is not responsible for the download, you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

• Event ID 11 when connecting external hard drive

  I did recently to create a new on my laptop.

  It's a Dell 15/Z.

  I use an external hard drive Iomega for more space.

  As part of the build process I was check my event viewer for messages of error and noticed the following error messages.

  Today, I plugged the drive on my laptop and saw the following message 5 times in quick succession.

  The driver has detected an error of the controller on \Device\Harddisk1\DR2.

  I uninstalled the driver and rebooted.

  I plugged the device so that the driver would have re - install and then I got the following message 4 times in quick succession:

  The driver has detected an error of the controller on \Device\Harddisk1\DR1.

  Both are registered against the event id 11 Source DISK and log SYSTEM name.

  Can someone advise me on how can I get rid of this for good error message.

  THX

  Hello

  I suggest you to please contact the Iomega support.

  http://Iomega.com/support/solutions/home.html

  Thank you

• When I try to add a VPN connection, I get an error that the wizard is unable to connect. I am running Windows Vista.

  When I try to add a VPN connection, I get an error that the wizard is unable to connect.  I am running VISTA. I want to simply add a VPN and be able to connect to a non-profit organization where I volunteer.  My VPN working two weeks ago.  Then my shortcut did not work, and this problem started.

  Any help is appreciated.

  original title: VPN Vista issues

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Vista Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• HP envy Phoenix: win 7 does not start with connected external hard drive

  I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

  Hello

  The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

  @tpetras

  I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

• Unable to connect wireless hard drive due to NetBIOS, what and how to activate it?

  I am sure that this has been requested before, but my roommates and I recently bought a Mac Time Capsule wireless router/HARD drive. I can use internet very well, but when I try to connect to the drive HARD (called airport disk), it is telling me "cannot connect to the disk. Please make sure NetBIOS is turned on, then try again (53).

  I have the password, and we have reinstalled the software twice. Help?

  They have all two Mac laptop so the connection is not a problem for them.

  I tried to enable BIOS pre departure from the menus but nothing helped.

  Features of the laptop:

  Windows Vista Edition Home Premium SP1

  Laptop Toshiba, 3.3 rating, Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 Ghz 2.00 Ghz, 1 GB Ram, 32-bit OS

  Any advice would be much appreciated.

  Hello Malcolm B.

  Thank you for using the Microsoft Answers forums.  You must start this service if it is not executed.  You will need an account with administrator rights.  Click on Start (Orb) to Control Panel Services in administrative tools.  Scroll to support TCP/IP NETBIOS and verify that its has started, if not double click on it and select start.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• Unable to connect external monitor

  My Pavilion with Vista home premium dv6910 won't see a 17 in LCD hyundai when you use the control panel Nvidia GeForce Go 715 m to implement the 2 monitors. It worked for awhile, but after trying to tweak the settings, that it stopped. The monitor works fine on other computers. Is it possible to erase the memory of the monitor with the Nvidia card?

  Uninstall the NVIDIA graphics driver.

  Resources:

  How to uninstall or change a program on Vista

  Download and install the latest HP NVIDIA graphics driver from here.

  Restart the system one to control the result.

• Unable to connect to wireless internet after Windows Vista update on 16/09/10

  Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

  If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

  I also tried to fix it by other solutions on this forum, that is

  • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

  The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

  Please could shed you some light on this case for me?

  Thank you very much

  Hello

  I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

  A big thank you to everyone who offered advice.

• Unable to connect to the internet using Windows Vista Edition Home Premium

  Just installed Windows Vista Home Premium and cannot connect to the internet.  The network card is a Broadcom 802.11n and a code appears who says: device cannot start (Code 10).  Does anyone know how I could fix this problem?

  I think that you don't have the right driver.

  Go to the website of FAB and look for downloads or support and type in your model number and find the driver for the network card.

  Thank you.

  Tech of

  http://www.computerstar.ca/

• Unable to connect to 11.2.0.1 Vista from another PC

  Hello
  I installed a database on Vista 32 Bit Version 11.2.0.1
  When I connect locally through SQL * Plus, everything is ok. But when I try to connect fom another PC via sqlplus I get 12541 error no listener.
  I think that there is a problem connecting via SQLNet. I get the same error using tnsping. But when I ping the pc target, I receive replies as well by using the name of the pc as address statistics.
  I disabled the firewall and defender. Where is another part that is blocking the connection?
  
  Please help me.
  Kind regards
  Siegwin

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )

  -Stop the listener

  -Replace localhost with the name of machine

  -Start the receiver

  -Wait up to a minute and post the output of "lsnrctl stat.

• Unable to connect usb or bluetooth to windows vista

  I am trying to install a programe to enable me transfer contacts, photos etc old mobile phone to the laptop.

  Hi Simon,.

   

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it seems you are trying to transfer contacts and pictures from Mobile to the computer.

  It would be great if you could answer these questions to help you further.

  1. what program are you trying to install?

  2. What is the brand and model of the mobile?

  3. are you an error message or error code?

  To transfer contacts and photos of the Mobile computer, we need to install the mobile software on your computer to synchronize all contacts and data.

  See the following for more information Microsoft article.

  http://TechNet.Microsoft.com/en-us/library/cc722321 (v = ws.10) .aspx

  Please come back with more information on the issue so that we can help you better.

  For any help about Windows, you can still post on the Microsoft Community Forums and we will be happy to help you.