Unable to connect wireless hard drive due to NetBIOS, what and how to activate it?

Similar Questions

• I lost my product key of Windows XP. I had to wipe my hard drive due to the virus, and now I can't activate Windows because I lost the key.

  I lost my product key. I had to wipe my hard drive due to the virus and I installed win xp pro back. now, I can not activate my copy. This is the disc that came with the computer. its windows xp pro sp/2 from dell. I've tried everything I know using keyfinders and research on the disk. the keyfinders and drive both will eventually go wrong. What can I do next?

  original title: lost product key

  Hello

  Contact Microsoft telephone support on this.

  http://support.Microsoft.com/contactus

  For more information visit: How to replace Microsoft or hardware, packs software service to order and replace product manuals

• my hard drive broke and I lost my design premium creative suite, I still have my serial number, but I need to redownload it to my new hard drive. Is this possible and how do I do it.

  Please let me know how redownload it. I already paid for it that I just accidentally lost it with the broken hard drive.

  Hey Rachelle,

  Please use the following link: other downloads

  Kind regards

  Bani

• Re: Unable to run the HARD drive recovery in the Tecra A11

  My laptop is a TECRA A11 - 1 8 PTSE1E-07-J044AR with processor i5, 4 GB RAM and running Windows 7 64 bit. Recently I had a problem with one of the user (desktop profile) profiles and has not been able to create one despite several attempts, so decided to reformat to the factory settings. But nevertheless I tried the procedure, he went only up to the Boot Manager settings. After that, the warning screen never comes to the top and the laptop eventually normal startup.

  So I decided to ignore the recovery of HARD drive and installed Windows 7 32 bit through a CD of formatting of the main partition to C: drive, but keeping the recovery partition, just in case. Now, even if Windows installed fine, however, none of the drivers (LAN, WiFi, video, sound, etc.) are installed.

  Now my questions are:

  1 can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?

  2. can I continue with the newly installed 32-bit Windows and just install all the necessary drivers and utils from Toshiba? If so, where the sources?

  Would be grateful for any help.

  > 1. Can I reinstall my old Windows 64 bit through the recovery of HARD drive? If so, how?
  After the clean version of the OS that it is not possible to install the recovery image using recovery option of HARD drive due to lack of repair my option computer start-up advanced options (F8 at startup).
  You can install recovery using recovery DVDs image only. Did you create this recovery disk?
  > 2. I can continue with the newly installed 32-bit Windows and just install all the necessary drivers and > Toshiba utils? If so, where the sources?
  Of course you can do it. If Win7 32-bit is supported for this laptop model all the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

  My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

  Hi Adel Bushager,

  I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

  Hope this information is useful.

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect large hard drives to Dell coming 8 Pro

  I bought a Dell coming 8 Pro yesterday and have several questions.   I'll post the others separately.

  I tried to connect several large (500 GB, 1 TB) hard drives in the device, but it does not recognize them.   I tried this with at least 3 of them so far.  It does not seem to recognize young readers usb very well.    Does anyone else have this problem?  Workaround solutions?   Seems to limit the usefulness of a device with a small disc hard (I got the 64 GB version).

  Hey, Buzz,

  Your biggest hard disks have ports to connect an external power supply? The venue Pro 8 is a small portable device with OTG, or supported USB ' On the Go ' as some phones. When used with an OTG cable, it can act as a USB host for simple devices of power like maps flash, mouse and keyboards, but not devices with rotating mass like hard drives large (or perhaps old) and fancy as USB vacuum keyboard and fan items. If your hard drives just to make a clicking sound when it is attached, it is likely that they do not receive enough power to spin to the top. This is normal for OTG devices. And if you don't have a power supply for the readers, you could try a self-powered USB hub that can provide more power to readers and still allows the V8P communicate as host.

• How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

  Hi Zling,

  It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect wireless DNS server is not recognized.

  My laptop won't connect wireless does not have the DNS server has never had a problem before

  Hi Roger,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the issue you are unable to connect wirelessly because there do not recognize the DNS server. The problem may be caused, if there is a miss match the IP address configuration. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2

  If the problem persists, I suggest you to release and renew the IP address. For this you can see the steps below.

  1. Go to Start, click all programs and open the Accessories.

  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. In the command prompt, type the following command and press ENTER:
     enough ipconfig and press ENTER.

  4. Then type ipconfig / renew and press ENTER.

  5. Type Exit and press ENTER.

  Method 3

  If the problem persists, try to reset the TCP/IP stack and see if it helps you to solve the problem. To reset TCP/IP, you can refer to the procedure described in the article mentioned below. If fixit does not help, try to follow the manual steps.

  How to reset TCP/IP using the NetShell utility

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• Message "Unable to locate the hard drive" after using XP Pro recovery disk

  I used my reinstall windows Home drive to recover a file system corrupted on a windows operating system pro. I hit the 'R' to repair key when he asked but now when I rebooted... I get a message "unable to locate the hard drive. Does anyone have an idea what went wrong? And I order a Windows OEM Pro installation disc and just do a clean install?

  
  

• Error 6 when I connect in photoshop CS4, after the replacement of my hard drive on my mac pro. How to reactivate my

  I replaced my hard drive on my mac pro and now when I try to use my photoshop CS4 app, I get error 6. How can I fix it?

  When you transfer products Adobe sauvegardΘ on Mac, it breaks licenses.

  The simple way to solve this problem is to reinstall.

  There is also a python script License repair that you run the Terminal in OSX application.

  Here's a screenshot for this guide: https://forums.adobe.com/thread/1714695

  Start the #11 message and carefully study everything first, before applying the patch.

• Help, I need to replace my hard drive in my hp pavilion a6863w how can I do this?

  The surface of the hard drive, test and get the test failed, a seagate 2 TB SSHD. I want to install it and I'm sure that I can do, but I need to know if I should leave the wrong disc in and just add this one, if I do this will it take all other cables, if yes, I'd rather just old-fashioned.
  I have the recovery install disks that I made when I bought first. I used these b4 to reinstall.

  I just need to know the steps if I add the 2nd disc or steps (if I need a cable) to replace the old disk with a new disk. This player would be my boot drive? When I ask for the steps, I'm more concerned about turning off the computer and what is it I have unplugged, etc.. Then once the new drive up, just run the recovery discs or y at - it an easier way?
  I tried to run a backup, but he stopped and wouldn't let me. I have all my important things like photo movies already saved etc.

  HP pavilion model # a6863w. Windows vista 64-bit

  panjok2 wrote:

  The surface of the hard drive, test and get the test failed, a seagate 2 TB SSHD. I want to install it and I'm sure that I can do, but I need to know if I should leave the wrong disc in and just add this one, if I do this will it take all other cables, if yes, I'd rather just old-fashioned. Remove the old drive, replace it with a new one and use the set of recovery disks. Choose factory image recovery.
  I have the recovery install disks that I made when I bought first. I used these b4 to reinstall.

  I just need to know the steps if I add the 2nd disc or steps (if I need a cable) to replace the old disk with a new disk. This player would be my boot drive? When I ask for the steps, I'm more concerned about turning off the computer and what is it I have unplugged, etc.. Then once the new drive up, just run the recovery discs or y at - it an easier way? Put the new drive in the same place as the old one and use the same cables (data and power) who were connected on.
  I tried to run a backup, but he stopped and wouldn't let me. I have all my important things like photo movies already saved etc. If the player does not, then try to save something from him is a waste of time because the hard disk controller has failed, too.

  HP pavilion model # a6863w. Windows vista 64-bit

  How to replace a hard drive.

  The video and images shoud help.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

  the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

  You n "t do it this way.

  You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

  If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  The process is simple:

  1. Install the software on your laptop for cloning
  2. RTFM (do not skip this step)
  3. Install the new drive in the external case
  4. Connect new player to the computer
  5. Clone original disc on new drive
  6. Stop
  7. Unplug the external computer case
  8. Exchange records (original for external disk) and the new laptop drive
  9. Reboot and enjoy your new drive.

  When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.