Unable to connect multiple computers using the router

Similar Questions

• Unable to connect when you use the router

  OK Ive been using my router for some time and it has always worked a few weeks ago, she decided to stop working, when im connect directly from computer to Internet modem is very good, so my cables and modem and all that is fine. When I connect everything through the router... Router, computer modem to the router, all the lights are show as normally its work, on the router and modem, the network on the computer thing Local didn't tell only / limited connectivity, rocking it back... but usually connectivity IPv4 said Limited instead of Internet

  Things I've tried:

  Unplug everything, turn it off wait 30 seconds... to deceive, dosent work

  Buy new cables just in case... it dosent work

  use LELA 1.6 to try and re-setup/installation/configuration of the router... says I don't have an internet connection

  updated LELA 3.0 or 3.2 I forgot what was it, and it does nothing

  tried to disable the network to try to turn it back on to see if it would help what whatsoever, and it the connection decides to disappear out of my zone connections network completely and then I don't have any internet at all the

  Usually I can solve a problem me when something goes whack with my net, but im lost and im hoping someone out there can help with my problem

  Reset the router...
  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Then click here to re - configure your router...

• Having multiple computers using the server POPS via Thunderbird. A new computer has IMAP server and cannot send or receive emails via Thunderbird. Help

  With the help of Mozilla Thunderbird - multiple computers use the POP server, but a new computer uses the IMAP server. Mail or back does not work
  Can we change the IMAP POP server to make it easier. All my other computers POP and mail is perfect.
  What can I do?

  First question is your email provider does support IMAP protocol?
  If this isn't the case, that is why it does not work.
  If they do, IMAP is a protocol much better use to check email from multiple devices.
  There are a lot of good tutorials on the differences between POP and IMAP if you can do your own research on this.

  You don't change an account from one protocol to another.
  You delete the account and add back with the correct protocol.
  Thunderbird has a tendency to select IMAP as a default value. You need to stop right there and make the POP changes if that's what you want or need.

• I am unable to connect my system using the microsoft account.

  Separated from this thread.

  Hello

  Unable to connect to my system using microsoft account IAM. I forgot the password, so went online and reset it, try to connect with the new password still showing the error message "your pc is offline. Please sign in with the last password used on this C. P'?

  no idea about my old password and unable to connect with the new password too.

  What is the fix for this?

  Hi Deepika,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Do you have any active account except your Microsoft account?
  2. Are able to connect to your e-mail you used as Microsoft account using the new password on the web?

  I suggest you refer to the following articles in order to retrieve your forgotten password.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Note: When you reinstall Windows, make sure that you must back up all data.

  Return to your Microsoft account if it has been compromised

  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

  Hope this information is useful.

  Thank you.

• Unable to connect to laptop using the microsoft account

  Try to connect to computer laptop microsoft account and he said: I can not connect at this time. Change password etc. After several attempts can usually be connected but so annoying - try again now after 50 minutes. You have to go on another computer (apple!). What is going on. I want more convenience

  Hello

  I'm sorry to know that you can not connect to the computer. Let me try and help you with this problem.

  (1) you have an active network connected to the PC?

  (2) did you do with the last changes made to your computer before this problem started?

  (3) are you able to connect to Microsoft online account? https://account.live.com/

  (4) using an Internet connection wired or wireless?

  This happens usually if there is a network connection problem or it could be a temporary problem.
  
  First, if you are a using a wireless connection, please connect your PC to a wired connection and check if you are able to connect.
  If this does not help, you can reset the password and check that helps. You can connect to the Microsoft website https://login.live.com/ account and reset the password, and then check.

  Let us know the result. If you have any other questions, we will be happy to help you.

• Unable to connect to esxi using the vsphere client

  Hello friends,

  I need a little help.

  a 2 5.0 esxi host and a vcenter than VM.

  My laboratory worked well for days, but all of a sudden do not know why I am not able to connect to ESXi hosts with vSphere Client.

  Error: The request failed because the remote server has taken too long to respond.

  Call "ServiceInstance.RetrieveContent" to "ServiceInstance' server '192.168.1.101' object failed.

  Yes, I am able to connect to vCenter server, when it is connected to vCenter and open the console of the virtual computer, nothing shows up, it's a black screen, as if the virtual machine is turned off. It is with all the virtual machines on both hosts.

  1. I thought that it might have to do something with vCenter and I tried connecting to Host individually which I wasn't able to.

  After completing a few KBs on vmware and some articles, I checked the status of the firewall on both hosts. (attached screenshot)

  

  Checked if my computer can talk to esxi host on port 80, 443, 902. all ports are accessible.

  Disabled the Symantec endpoint protection and checked. no positive results.

  Finally, I tried the ESXi web navigation browser host http://ESXi-IP-address which redirects me to HTTPS connection with Certificate error, when I continue with the cert error, loading of the URL guard and the host page doesn't appear as it should.

  This questions are on both hosts. :-(

  You guys can point me in the right direction to solve this problem.

  Thank you.

  Finally things started working now.

  The problem was with the configuration of the workstation's NETWORK adapter.

  The link on the NETWORK adapter speed was set to Auto negotiate (default), but the speed was detected as 100 Mbps instead of 1 Gbps and MTU has been set at 9014 which I defined manually long back.

  Things use to operate in this configuration that I have configured hosts with MTU 9000 and cisco SMB switch default Jumbo.

  the LinkSpeed of 100 Mbps is bugging me, after changing to 1 Gbps (manual setting) the card NETWORK has deactivated, and it reminded me to switch!

  So I put the LinkSpeed Auto negotiation, MTU 9014, stop the two hosts, restart the switch. restarted my computer.

  Since it uses for things were in a normal state.

  Even the question of the console (black screen) disappeared. :-)

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

  How D link to connect to the modem connection

  I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

  Hi Bob,

  You can follow this link & check if it helps:

  How to set up and use remote connections in Windows XP?

  Internet Connection Wizard

  
  Reference: How to configure Internet access in Windows XP Professional?

  Hope the helps of information.

• How do you install the creative cloud on several computers using the same license?

  How do you install the creative cloud on several computers using the same license?

  Installation on multiple computers can be done independently of the subscription.  You only need the lic3ense when it comes to activation, you have two active facilities (signed in).  Just install the desktop application and use it to install the applications, and then connect to activate.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to internet via wireless router

  Original title: router Question through the network

  Hello!

  Basically, I use NET connection of type PP - Poe, that requires a user name & password to connect. I have 1 Mbps plan of development. recently, I bought a D-link wireless router.
  Connectivity is as---> main internet cable in this way will my internet port of the router. One cable goes on my desk from the LAN1 router lan port. I have configured my router with all the necessary parameters saved & now when I start my computer I dnt need to put the user name and password to connect to the internet.
  I is automatically connected to my network using the router I think.
  Now, the problem is that I use it more than 3 to 4 months. but now, when I start my pc, the network icon on the keep the taskbar on the search for the network all the time.
  Oh, I can't do something, or I can use my cursor also because I move my cursor, but cannot use it. Thus, in this condition I vigorously shutdown my pc, the turnoff to my router & then I start my pc. so if I want to connect to the network, I remove the mains cable and the plugin on my office lan and evrything port works fine. in this State I put the user name and password to connect to the internet.
  SO the thing is these days each time, I keep my router IT and start my pc to the Dungeon of the taskbar, the network icon on the turning points for an unlimited period.
  then, when I am facing this problem I keep my pc WE & the turnoff to my router, then after some time the icon bar of the tasks of the network stop (research or rotation) and it's yellow exclamation point. then use the internet I remove the cable main network from the router and connect to my office. He asks username and password then the connection works fine.
  I am using windows 7 ultimate 64-bit.
  still a very strange thing is when I'm dealing with this network icon turning question I connect my cell phone to my wi - fi router & it works well, but the scenario with my office is the icon itself keep turning. I use a basic wireless router. model No.:. DIR-524.
  I hope, I tried my best to explain my problem.
  waiting for the answer.

  Hello

  First of all, make sure that you have the latest drivers installed for the network card.

  I can suggest you to run the network troubleshooter and check.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• To connect to vCenter using the same Session with PowerCLI

  Hi all

  Is it possible that we can establish multiple connections to vCenter using the same session with Powercli.

  As connect-viserver-Server "vcenter1" - domain\domainacnt of the username-password "Password".

  is to establish several connections and we want to limit, because we are in the process of report generation based on the web developing using Powercli with IIS.

  Please suggest.

  You can use the Session parameter on the cmdlet Connect-VIServer .

  I use this for the PowerShell Workflows, see workflow of PowerShell and PowerCLI

• IPhone 7 will accept multiple fingerprints using the key ID?

  IPhone 7 will accept multiple fingerprints using the key ID?  If so, how?

  My iPhone 5 allows you to set up several fingerprints via settings > Touch ID & password, I doubt that the iPhone 7 would have fewer features.

  (I asked for your message to be moved to the forum from iPhone to help, do not know why you decided to post on the forum to help iPad.)

• 4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer

  How can I fax multiple pages using the hp officejet 4500 desktop that you just bought

  can you please email me at [removed personal information]