Unable to connect to laptop using the microsoft account

Similar Questions

• I am unable to connect my system using the microsoft account.

  Separated from this thread.

  Hello

  Unable to connect to my system using microsoft account IAM. I forgot the password, so went online and reset it, try to connect with the new password still showing the error message "your pc is offline. Please sign in with the last password used on this C. P'?

  no idea about my old password and unable to connect with the new password too.

  What is the fix for this?

  Hi Deepika,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Do you have any active account except your Microsoft account?
  2. Are able to connect to your e-mail you used as Microsoft account using the new password on the web?

  I suggest you refer to the following articles in order to retrieve your forgotten password.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Note: When you reinstall Windows, make sure that you must back up all data.

  Return to your Microsoft account if it has been compromised

  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

  Hope this information is useful.

  Thank you.

• Unable to connect using the microsoft account

  I'm not getting this blue screen that allows me to connect with the microsoft account.

  Its a weird screen that only allows the Skype ID.

  I don't know why it does.

  

  My BF fixed it. He wants me to type it was an IE problem... then he found THAT DX issues... then he tried mounting... Skype got in but has frozen all the time. Then he resorted to do a system restore. Now it's working. This is what BF is good for are they not?

• "Update info" link does not work in Windows 8 by using the Microsoft account

  I have Windows 8 Pro. I had signed with my Microsoft account.

  Recently, I ran into problems of synchronization and so had to sign out and sign in my account from Microsoft on my PC in Windows 8.
  I have 2 steps check activate my Microsoft account and authenticate using the authenticator application for Windows Phone 8.
  I signed on the Microsoft account on my PC after switching to a local account and on the Microsoft account. I used normal password (not the app since it does not accept it). Successfully signed in, she says that the parameters can not be synchronized until I've "update info" in my Microsoft account. I know it asks me the passcode generated by the application, but the link is dead. Here is the screenshot of the link.
  
  How can I make it work?
  Reset my PC isn't an option. I can't afford to lose everything I have in there. In addition, a system at this stage image backup is useless for obvious reasons.

  Hi Ram,

  As the link update security information is dead, you can connect to the Microsoft account directly and update security information.
  Here is the link: https://account.live.com/summarypage.aspx

  Why should I verify my email address?
  http://Windows.Microsoft.com/en-us/Windows-Live/account-verify-ID-email-address
  Security information for the Microsoft account: FAQ
  http://Windows.Microsoft.com/en-in/Windows-Live/account-security-password-information

  Let us know if that helps.  If the problem persists, please answer, we will be happy to help you.

• Unable to connect multiple computers using the router

  Original title: router WiFi has changed

  Hi, my router when initially set up allowed all our computers, phones etc to use the wireless connection, my brother connected to his laptop and now it will allow only one thing to connect both. If another device connects it disconnects one that was originally in line.  Do you know what it changed?

  Hello

  You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

• Sign in error using the Microsoft account for the custom domain

  Hello

  I'm trying to connect to Skype by using our business e-mail address that uses Windows Live Custom Domain service. After be identified using the link "Sign in with a Microsoft account", the usual "create an account or connect" appears, but two options ("I have a Skype account" and "I am new to Skype") leads to the following error after clicking 'Join Skype': 'there is a problem of signing with Microsoft account. Please try again or connect with Skype details rather than this'. I tried with the two Skype Desktop and on the Web.

  Any help is greatly appreciated...

  Thank you!

  Well, I managed to make it work by creating a new Skype account with the same email as my Microsoft Account address.

• Unable to connect to one of the 3 accounts

  We can get our administrator account and my account, but the 3rd account won't open a session. I tried to reset the password already. The error message reads-user profile Service service has no logon. If we put the wrong password, it tells us that it's the wrong password. In the account manager, I notice that the 2 first accounts are noted as local/local, but the 3rd account local/backup. I don't know what this means, but I thought it might be a clue. The last thing done on this account was to watch a movie.

  Maybe this works better:

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?

• Unable to connect when you use the router

  OK Ive been using my router for some time and it has always worked a few weeks ago, she decided to stop working, when im connect directly from computer to Internet modem is very good, so my cables and modem and all that is fine. When I connect everything through the router... Router, computer modem to the router, all the lights are show as normally its work, on the router and modem, the network on the computer thing Local didn't tell only / limited connectivity, rocking it back... but usually connectivity IPv4 said Limited instead of Internet

  Things I've tried:

  Unplug everything, turn it off wait 30 seconds... to deceive, dosent work

  Buy new cables just in case... it dosent work

  use LELA 1.6 to try and re-setup/installation/configuration of the router... says I don't have an internet connection

  updated LELA 3.0 or 3.2 I forgot what was it, and it does nothing

  tried to disable the network to try to turn it back on to see if it would help what whatsoever, and it the connection decides to disappear out of my zone connections network completely and then I don't have any internet at all the

  Usually I can solve a problem me when something goes whack with my net, but im lost and im hoping someone out there can help with my problem

  Reset the router...
  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Then click here to re - configure your router...

• Unable to connect to esxi using the vsphere client

  Hello friends,

  I need a little help.

  a 2 5.0 esxi host and a vcenter than VM.

  My laboratory worked well for days, but all of a sudden do not know why I am not able to connect to ESXi hosts with vSphere Client.

  Error: The request failed because the remote server has taken too long to respond.

  Call "ServiceInstance.RetrieveContent" to "ServiceInstance' server '192.168.1.101' object failed.

  Yes, I am able to connect to vCenter server, when it is connected to vCenter and open the console of the virtual computer, nothing shows up, it's a black screen, as if the virtual machine is turned off. It is with all the virtual machines on both hosts.

  1. I thought that it might have to do something with vCenter and I tried connecting to Host individually which I wasn't able to.

  After completing a few KBs on vmware and some articles, I checked the status of the firewall on both hosts. (attached screenshot)

  

  Checked if my computer can talk to esxi host on port 80, 443, 902. all ports are accessible.

  Disabled the Symantec endpoint protection and checked. no positive results.

  Finally, I tried the ESXi web navigation browser host http://ESXi-IP-address which redirects me to HTTPS connection with Certificate error, when I continue with the cert error, loading of the URL guard and the host page doesn't appear as it should.

  This questions are on both hosts. :-(

  You guys can point me in the right direction to solve this problem.

  Thank you.

  Finally things started working now.

  The problem was with the configuration of the workstation's NETWORK adapter.

  The link on the NETWORK adapter speed was set to Auto negotiate (default), but the speed was detected as 100 Mbps instead of 1 Gbps and MTU has been set at 9014 which I defined manually long back.

  Things use to operate in this configuration that I have configured hosts with MTU 9000 and cisco SMB switch default Jumbo.

  the LinkSpeed of 100 Mbps is bugging me, after changing to 1 Gbps (manual setting) the card NETWORK has deactivated, and it reminded me to switch!

  So I put the LinkSpeed Auto negotiation, MTU 9014, stop the two hosts, restart the switch. restarted my computer.

  Since it uses for things were in a normal state.

  Even the question of the console (black screen) disappeared. :-)

• Merger of Skype with the Microsoft account

  I use the Microsoft account and without much thinking, I chose "I am new to Skype" on the connection for the first time. Now I can't get the screen to merge the accounts because it saves me straight to an empty contact list :)

  So the question is: how to get to this screen again to choose the option to merge the old Skype account?

  Thanks in advance.

  Hello

  The Microsoft Community has no real influence with Skype so if we had problems
  with Skype, we would have to use the same resources available to all users.

  E-mail address is removed from the privacy *.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - help
  https://support.Skype.com/en/

  Skype - Forums
  http://Forum.Skype.com/

  Questions about Skype
  http://answers.Microsoft.com/en-us/windowslive/Forum/Messenger-signin/messengerskype-frequently-asked-questions/cad4b55a-0c3c-4494-9d5d-cc4c96969691

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to connect to my server through my laptop using the selections of my network places.

  I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

  I recently installed McAfee Total Protection on my laptop.

  Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

  I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Unable to connect to the network share after the Microsoft Account

  I am running Windows 8 Pro and if I setup with a local account, I can access my server to NetApp files very well. As soon as I switch to a Microsoft Account, I can't connect to file shares. I get "the specified server cannot perform the requested operation."

  How can I use my Microsoft Account and still access the network share?

  Also, I have a laptop running Windows 8, connected to the same network that can access the share file very well. I already tried a "system refresh" and complete a reinstall.

  Any suggestion?

  If you map a drive to the share and select Connect using different credentials and enter your local account information it works?

  You can map a drive by:

  1. Right-click on computer.
  2. Select the network drive mapping...