Unable to connect on any game application

Similar Questions

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Unable to connect to the game server

  whenever I try to play canasta lately I get up error message "Unable to connect to the game server" whas?

  Could be a problem with the security software, try to turn it off and check if that helps and if not contact the game provider

• Unable to connect to Spades Game says try to revive

  Unable to connect to msn Spades Game says try to restart but still does not work

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. what web browser are you using to play the game?

  4. What is the full and exact error message?

  Please provide more information to help you best.

  I suggest also refer to the link for MSN games support:

  http://zone.MSN.com/en/support/article/supporttoc.htm

• Suddenly 39.0 FF is "unable to connect" to any web page

  I use almost identical installations of 39.0 FF on both computers Windows 7 Pro. On computer 1, for the last two hours, I got "unable to connect" on each URL I tried. It can access things stored locally, such as troubleshooting information. FF on computer 2 is fine, and Chrome and IE work fine on computer 1.

  The problem started watching a movie on Netflix streaming on computer 1. The image suddenly froze and the speakers emitted a wicked repetitive noise - maybe it was 2 seconds of the movie soundtrack play again and again. Commands from the computer totally locked up. I kept only the noise of voltage with power button on the computer. I restarted the computer in safe mode, and then it restarted in normal mode. Now, everything on the computer seems fine - except Firefox.

  I tried to restart FF in safe mode; same problem in the corresponding mode. I saved copies of information for troubleshooting in safe and regular mode, and a copy of the submitted crash reports also list. I'll share these if you tell me how. (Can't do it with the button "Share data", of course, because I can't go to this form to ask a question on computer 1 - I am posting this to computer 2)

  The only thing I have not tried is "Refresh Firefox". I'd really rather not do that, because it will scan all my modules and customizations.

  Would appreciate any help you can offer.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

  ....
  You can check problems caused by malware.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• Unable to connect to the games for windows live to activate dead rising 2

  Games for Windows Live, Activation of the Production and Dead Rising 2

  Hello

  I have a problem with the activation of a product through Games for Windows Live. It is that my computer is unable to connect to Games for Windows Live via the internet even if my computer is connected to the internet. The product needs to connect to Games for Windows Live for him were allowed to be used. A username of Games for Windows Live and the password is not necessary according to the product. The first obvious solution was to turn off my firewall, restarted and the connection attempt. Unfortunately, she didn't and I don't no how to best continue. I contacted customer support and has been achieved here.
  If possible could you please give me some advice on how to connect?
  Thank you.
  Mark

  Hi Mark,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if the problem still persists.

  Games for Windows LIVE: solving problems

  http://support.Microsoft.com/kb/977709

   

  Method 2: If the method above does not help, then you can read the following article and check.

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  http://support.Microsoft.com/kb/938705

  You can also view the article mentioned for more information below:

  Games for Windows - LIVE: how to create a LIVE account

  http://support.Microsoft.com/kb/937066

  Let us know if that helps.

• vrealize 6.2 unable to connect on any tenants, can connect to the default tenant

  Helping people, I've been scratching my head for 4 days now.

  Environment

  DC - 2012

  Vcac-device 6.2

  identity device 6.2

  IAAS services on windows 2012

  also haven't tried with vcenter sso sso no chance.

  It is a new environment

  the good:-I can connect to the default tenant with the account admin and all domain account that I add access to.

  the BAD

  All new tenants, I create, I am unable to connect to

  I get the error

  401-Unauthorized: access is denied due to credentials not valid.

  You don't have permission to view this directory or page using the credentials you supplied.

  -J' tried to rebuild at least 10 times (about to abandon VCAC and start learning the IAC :-/) - (ran the 6.2 prereq everytime script)

  -all servers are NTP synchronized without delay.

  -All DNS entries are in place with the research front and rear.

  -all services 28 show such registered unit VCAC

  -no error in catalina.out vcac device

  -Although I am accessing a link of tenant https://Vcac-IAAS/Shell-UI-app/Labs -(laboratoires est mon locataire)

  Catalina.out shows holding = "vspehre.local"

  2015-01-22 01:22:13, 915 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 8 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:30, vcac 276: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.endpoint.SsoResponseListener.consumeResponse:77 - you POST'ed to the Websso client library!

  2015-01-22 01:22:30, 276 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:72 - SAMLResponse validation...

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.ValidationState.validateDestination:64 - destination request validation: HttpservletRequest destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/ssoSAML message destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/SSO

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateInResponseTo:158 - optional validation request ID: _cc2719796497ca852f426b742b4a79fe

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:180 - assertion validation...

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.getIDPCertByIssuer:944 - IDP is config for: https://Vcac-ID.ten.local:7444/WebSSO/Saml2/metadata/vSphere.local

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.validateRequestSignature:597 - signature verification SAML message...

  2015-01-22 01:22:30, 305 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:247 - statement analysis...

  2015-01-22 01:22:30, vcac 317: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:319 - NameID: [email protected]

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:320 - NameIDFormat: http://schemas.xmlsoap.org/claims/UPN

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:231 - affirmation of SSO successfully validated

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:105 - validated successfully received SAMLResponse

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:31, 477 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.acquireTokenByCertificate:467 - successfully acquired for the user token: {name: administrator, domain: ten.local}

  2015-01-22 01:22:32, vcac 036: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.renewToken:531 - token successfully renewed for the user: {name: administrator, domain: ten.local}

  I tried to start the deafult Web site using my Vcac-service account (in Internet Information services Manager).

  -all certificates are self-signed

  stores - identitiy are tenant default configured correctly and working for

  -All virtual machines running on SSD without isssue IOPS / s.

  -all licenses have been configured.

  -NO errors in the IIS logs

  MSDTC - without errors or questions

  -MSDTC running on SQL server and server IAAS

  Authentication - MSDTC defined on mutual authentication (also haven't tried no authentication)

  when I try to browser goto https://fqdnofiaas/vcac(shell-ui-app) (from the host local or server IAAS) I get

  you have no power to view this page. the system records all attempts to inappropriate access.

  I suspect the question to an IIS misconfig or any Advisor of Bug?

  THX

  https://Vcac-IAAS/Shell-UI-app/Labs https://Vcac-IAAS/Shell-UI-app/Labs You must have add org/orgname https://vcac-iaas/vcac/org/labs

  https://vcac-caf e, vcac, org, orgName for orgs no by default.

• Unable to connect to ANY internet browser after update Firefox? fake

  I can't connect to any internet browser today. The only thing lately has had many requests for updates to Mozilla, which I approved as I thought they were legitimate. Guess maybe not. How can I get rid of this probable virus without an internet connection? Any help much appreciated.

  Thanks Matt_G but my other laptop connects fine to the internet so it's not the carrier, wireless, modem, etc. In regards to the IPS, firewall, etc., none of this has changed since I have finally used internet on this portable 2d there are. I run my antivirus AVG, and so far, no estimated. Im not sure why Id have a problem suddenly Windows either unless it's a virus / similar. I suppose that the patient enough to take it to a computer place.

• Satellite A210-171 - unable to connect to any access point or router

  Hello. I don't know that this is the right forum. Not something I do normally but since I am desperate to solve this problem, I'll give it a shot.

  So I bought a Toshiba Satellite A210-171 nearly a year ago. It has a built-in wireless driver.

  The problem is, however, I can't seem to connect to any access point or router. What I end up getting most of the time are so a message saying that I am connected but with limited connectivity which means I can't access the internet. At other times, the network in range will appear in my network list, (with a signal strength excellent), but once I have select a message appears saying that the connection attempt has failed. And at other times my laptop detects the network connection and functions smoothly.

  I do not understand of course. So if someone could explain to me why my laptop selects and selects Wireless connections, that it connects and how I can solve this problem, I would be grateful!

  Thanks in advance

  Have you tried to update the driver on your laptop?
  Check the Toshiba site for an update:

  http://EU.computers.Toshiba-Europe.com > support & downloads-download drivers online

  And if you are already on this site check for a BIOS update.

• Extremely low signal wireless unable to connect to any network

  Hello

  I bought just a Studio 1535 and can not get the wireless to connect to any network unless I put the computer 2 feet or closer to the router.

  I am running Vista Home Premium, and according to the Device Manager my wireless is a Dell Wireless 1397 WLAN Mini card.

  When I'm right next to a router, I can connect either password protected or not.  Also, I have other computers can connect to each network without any problems.  I know that this is not a router problem.  I tried with several different routers and several different locations.

  I can see a long list of points connect wireless, each with what reads like excellent signal.  However, when I tell the computer to connect, I get a screen "Windows cannot connect to the ____."  When I select diagnose the problem, it says "Wireless association failed because windows did not receive response from the access point or wireless router.

  Dell support will not help me because I bought the computer at Best Buy and Geek Squad wants to send my computer is turned off (which I had for a day) to be diagnosed.  I would rather here check everything first...

  Thanks to all helpers, let me know what information you need from me!

  
  

• Unable to connect to any internet - based programs except windows mail still receives. Windows 8 operating system

  I the origin of this tag on the application of someone else, but thought that might get missed then asked a new question of my own

  I'm having this problem too.  It occurred spontaneously two nights ago. Until now, I had no problem with the connection, now although I can see the internet connection (wireless), it's a signal strong and windows mail will always receive emails, I can't access ALL the web connections.  Can't get windows updates, cannot use any browser (chrome or ie), cannot connect to itunes store.  Sometimes if I reboot I get a shot at a link to a web page and then nothing.  I spent hours on this point - have used norton removal tool to remove the remains of any preinstalled software norton, no proxy box is checked, took

  and protocols tcp readded, tried to change the DNS settings, removed and restarted winsock from registry.  Finally last night I started to remove applications - removed from google chrome, deleted itunes and all the components, report of Trusteer deleted (which may have been the only thing to be updated when the problem started and removed my av (panda) software.)  Finally, several reboots later, I thought that I had cracked because I was able to connect to the internet, reinstalled the av software, reinstalled chrome, reinstalled itunes and has managed to make updates, I tried to do in itunes.  BUT, this morning have restarted - when the PC was closing I got a fleeting glimpse off the coast of the webcheckmonitor error message that disappeared before I could do anything and I'm back to square 1 - I.e.I can get windows mail but NOTHING ELSE through browser windows.

  Responses to help advising a link to Web sites or by downloading tools are useless as I have no Internet connection.  And, Yes, I've tried is doing a restore of windows and while I can restore to the most recent time point on 3 July, to return to any another restore point generates an error (0x8007045b) - a Microsoft.windowscommumicationsappsdocx file cannot be extracted.

  Full scans of my PC with my av software found nothing.

  I'm now about to do a full factory reset, but the thought of reinstalling everything makes me want to cry

  There must be a solution - all the forums I've seen are a few years referring to xp or vista, but I use windows 8 (reluctant valuation) after that xp is out of support and really wish I had that sturdy old BONES back!

  Moreover, I am writing from an iPad connected to the wireless router even though I know that my internet connection works.

  Well, my problem seems to solve as spontaneously as it came! So after trying to solve the problem in the region of 15 hours over 3 days, including a lot of time in the queue to speak to my ISP in case there was a problem in broadband, day 4 when I started my PC everything was OK.

  It's a real conundrum!   When I persuade my ISP to do a speedtest on my line, they measured the line speed at 1.5 Mbit/s.  I couldn't even run speedtest form my PC at the time that I received no response.

  I know not so mobile devices and windows mail is lighter to consumers on the Internet than a complete PC based browser and were able to maintain the internet connection if the line speeds were poor. It seems weird that my mobile could happily connect to mail, google search and internet sites so that my PC can 'see' my router but not access the internet.

  Again, thanks for your response.  The only thing I hadn't tried (and ultimately does not need of) has been updated to network adapter - but notice I could not find updates for her in any case I was getting no response for searches on the web at the time and had already tried to look for windows updates , but he could not connect.

• Unable to connect to a different application on a third computer

  I have a subscription to creative cloud and Dreamweaver CC2015 installed on the #1 computer. I have Dreamweaver CS6 (not part of the subscription of the CC) installed on #2 and #3 computers. I cannot now begin ONE of these applications without getting the message on "you can't have 2 connections" and "sign on one of them" (not word for Word, the message is not open immediately). This feels like being not able to open, for example, Photoshop, because I have Dreamweaver open! CS6 DW doesn't do not part of the subscription of the CC, it's a completely different application, bought and paid for. I don't have the creative Office Cloud app installed on two of these computers (#1 and #2) but there seems to be no way to sign up on that if it factored into two connections, and I can't uninstall it even on computer #2 because it indicates that it programs there it which need it; NO program of creative cloud except the desktop app is installed on this computer. Any help?

  The two CC & CS6 could cause some conflicts, please discuss with us to Support Adobe

  Concerning

  Stéphane

• Unable to connect to any URL with the "WindowsUpdate" string in it, on any server. Again maybe virus?

  OK, some background on me, just to avoid some types of questions: I'm not an expert in huge windows, but I use it as my office like a bit of a user with power for 10 years, and I've been a professional Unix administrator since almost 15 years; I'm paid to know my way around computers.

  Computer of my nephew, I work remotely via TeamViewer, knows a problem really incredibly strange.  No matter what the URL with "WindowsUpdate" or similar to get connection reset by peer, in IE and FireFox, and apparently in Windows Update too because he can't actually update anything.

  So fine, virus; Well, Yes, there has been a lot of virus, but they are all had: S & D of Spybot, AdAware and Avast all say that it is clean.  The last time I ran TrendMicro Housecall it crashed, but I saw him more than halfway done and he had not found anything like that or the other.

  It cannot be something simple as a parameter of weird registry or hosts file entry, because it is sensitive to the context and occurs with any server.

  Let me explain: when he started to arrive, I thought it was a Windows Update problem specifically. If it is not; This computer can't see http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=fb0ddab0-e9a0-4edc-b3ea-144ff14190b3&cat=&lang=&cr=&sloc=&m=1&p=1, for example, in a browser, apparently because of this "windowsupdate" in there...  But I didn't know that I went and grabbed a update WindowsUpdate manually, and pasted on my server.

  It's when things are weird; It's my server, it has nothing to do with MS, and it serves many users every day very well.

  On my nephew's computer, I get connection reset by peer for this:

  http://teddyb.org/~rlpowell/public_media/WindowsUpdateAgent30-x86.exe

  and this:

  http://teddyb.org/~rlpowell/public_media/WindowsUpdateAgent30-x86.zip

  but NOT the same exact zip file renamed, like this:

  http://teddyb.org/~rlpowell/public_media/harmless.zip

  I assure you, that these two last URL points to exactly the same data (the .exe in a zip file above).

  So the problem seems to actually be URL with the text "windowsupdate" in them, which seems like it should be a piece running of malware to apply, or something like that, but... really doesn't seem like it.

  Normally, I'd just like to fix it, but this case is so bizarre that I think that I really want to figure it out, too.  Maybe it's the sign of a new virus or something?

  -Robin

  Hello

  I ran into the same issue and finally I was able to remedy. I used ComboFix utility, you can find it here . He found only one problem in my system associated with dmio.sys.

  Here's the line of the log file:

  Infected copy of c:\windows\system32\drivers\dmio.sys was found and disinfected

  And now everything works as expected

  Zbynek

• Unable to connect to the games for Windows Live Marketplace program, error 80048821

  Original title: games for windows marketplace

  I can not connect to games for windows live Marketplace program, I can connect to the website, end-to-end when you enter the same details, the ID and the password I get error 80048821

  Hi John,

  The question you posted corresponds to the games for Windows Marketplace and would be better suited to the XBOX community.

  You can check this link:
  http://support.Xbox.com/en-us/Games/PC-games/sign-in-help-for-Web-marketplace

  For further support, please visit the link below to find a community that will provide the support you want.
  http://marketplace.Xbox.com/en-us/PC

  Hope this information helps.