Unable to connect to Spades Game says try to revive

Similar Questions

• Unable to connect to the game server

  whenever I try to play canasta lately I get up error message "Unable to connect to the game server" whas?

  Could be a problem with the security software, try to turn it off and check if that helps and if not contact the game provider

• Unable to connect to hotmail account, says its not available

  Original title: unable to connect!

  I used my hotmail account to sign in and ask my own question.  Now, whenever I try to connect, I always get the 'One step further' window (which your FAQ says that occurs the first time) and if I try to use the screen name I used the first time, she says that's not available!  Yes I know!  IT OF MINE!  I'm the one who used it!

  Should we use a single pseudonym with each single sign-in?  What is the point to choose a pseudonym, if it cannot be used once?

  How can I use the original screen name, I put?

  Hello.  It is mikecooper AKA yongkalep.

  Looks like it was fixed!

  THANK YOU, BARB!

  I hope you see this.  My email tells me I've got a private message, but now that I'm yongkalep again, I can't see... ;-)

  THANK YOU, BARB!

• Unable to connect to the games for windows live to activate dead rising 2

  Games for Windows Live, Activation of the Production and Dead Rising 2

  Hello

  I have a problem with the activation of a product through Games for Windows Live. It is that my computer is unable to connect to Games for Windows Live via the internet even if my computer is connected to the internet. The product needs to connect to Games for Windows Live for him were allowed to be used. A username of Games for Windows Live and the password is not necessary according to the product. The first obvious solution was to turn off my firewall, restarted and the connection attempt. Unfortunately, she didn't and I don't no how to best continue. I contacted customer support and has been achieved here.
  If possible could you please give me some advice on how to connect?
  Thank you.
  Mark

  Hi Mark,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if the problem still persists.

  Games for Windows LIVE: solving problems

  http://support.Microsoft.com/kb/977709

   

  Method 2: If the method above does not help, then you can read the following article and check.

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  http://support.Microsoft.com/kb/938705

  You can also view the article mentioned for more information below:

  Games for Windows - LIVE: how to create a LIVE account

  http://support.Microsoft.com/kb/937066

  Let us know if that helps.

• trying to log in. "Unable to connect to service" Offline, says "unable to connect".

  When I try to open 'bêta Adobe Story', I enter my log in info (which I know is correct).

  It gives me an error: unable to connect to the services. You want to connect offline?

  I click 'yes '.

  The alert said: "Failed to Connect. Please try again later. »

  You have a very old version of the desktop application (because the story is no longer "Beta")?

  If so, try to uninstall and install the app again (since the Adobe Story homepage). You will also need to be a 'more' customer story now to be able to install the application (not free).

  Let us know if you face any problems.

  Thank you

  Rashi

• Unable to connect on any game application

  I have a Microsoft Account and I used it as a user here on my Windows 8.

  The locale is the same thing with my region settings account Xbox. Same thing for my Live account. Why then I connect to these games?

  Microsoft Solitaire

  Jetpack Joyride
  Cut the Rope
  and other games with Xbox account integration... :(

  Hi Will,

  Thanks for the update.

  I ask you to contact Xbox support forums for further assistance regarding this issue.

  If you have any other questions about Windows operating systems, please get back to us.

• Unable to connect the network, it says invalid IP-configuration

  Original title: network problems...

  Please, can you help me with this?

  My network connection between my TomTom GPS and my computer says that it is active, but also says that it doesn't have a current or valid configuration IP, what makes this mean and how can I solve this problem?

  Thank you

  Hello

  1. What is the version of the operating system installed on your computer?

  2. you have made no changes to the computer before the broadcast took place?

  3. What is the exact full error message?

  If you are using Windows 7 and Vista follow below mentioned methods:

  Method 1: Try to reset the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357 .

  Method 2:

   

  Windows wireless and wired network connection problems

   

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope the above information is helpful.

• Unable to connect to the games for Windows Live Marketplace program, error 80048821

  Original title: games for windows marketplace

  I can not connect to games for windows live Marketplace program, I can connect to the website, end-to-end when you enter the same details, the ID and the password I get error 80048821

  Hi John,

  The question you posted corresponds to the games for Windows Marketplace and would be better suited to the XBOX community.

  You can check this link:
  http://support.Xbox.com/en-us/Games/PC-games/sign-in-help-for-Web-marketplace

  For further support, please visit the link below to find a community that will provide the support you want.
  http://marketplace.Xbox.com/en-us/PC

  Hope this information helps.

• BlackBerry smartphones URGENT aid NEEDS! 'Unable to connect to internet.

  Hi, hoping someone on that can help me.

  I have had my blackberry of the flame for about a month now, I'm with vodafone UK and my rate includes unlimited internet access. I was able to use the internet very well until two days ago, when I got a message saying "unable to connect to the internet, please try again later" I contacted vodafone to this topic earlier in the day and they were quite baffled, told me that everything on my account seems fine and should work fine. The person I spoke made me remove my service books and you sign up again using host routing table. Finally after trying many other things (pulling on the battery, a soft reset, update my SIM Card.) removing books worked service!

  Now (after a hard reset I did) the phone displays the same message telling me I can't access the internet. I repeated the steps to remove my service books and register again, but it only allows me to browse the internet for a short period, until the message is displayed again?

  Everything works fine... Apps, Messenger, call, send SMS...

  Please if someone knows something that will help then I would be very grateful. (Also I did a full cleaning of the phone security - it did not help, the message was still displayed.)

  Hi & thanks for the quick response.

  After phone vodafone up (yet) I was put through to the technical support who told me able for them to update my card sim in order to correct the flaws that I needed to go into internet options, manual switch and choose a random network my phone is picked up (obviously don't pick up not vodafone). After confirmation that my sim card has been updated at the end there I then switched back to automatic in my internet settings and it told me that I have to turn off my phone and take out the card battery & sim for an hour.

  After all an hour and a half, that I decided that I had left the phone long enough & tried to access internet when, surprisingly it worked! (and it's still working fingers crossed).

  Once the phone was back on I received notifications informing me I was registered with the network and I should start to receive email & tel in no time... I did!

  So for someone who is having the same problems or similar, I suggest the ringtone to the top of your service provider and asking them to update your sim card!

  Thanks again for your response, I hope my phone WORKS now as I really like my Blackberry Torch

• Unable to connect to app store after iOS iphone 10 6 update

  Hello

  Since the upgrade to IOS 10 my iPhone 6 with stubbornly refuses to connect to the App store. The error message is "unable to connect to the app store, try again."

  The phone is connected to the internet (I can surf and send emails) by wifi. Turn off the wifi and the use of mobile (cellular) only link cause the same error. I also did a reboot hot and cold, without result.

  Any suggestions?

  Thank you

  Bill...

  ANSWER: this theme has the best 3 options. In my case, I had to sign out and in the app store of settings, iTunes and app store. Fixed

  PLE-3598048 http://www.Macworld.co.uk/How-to/iPhone/What-do-If-You-cant-connect-App-Store-AP.

• Unable to connect to the Panel of web directors on ReadyNAS RN102 #24506517

  Hello

  After running beautifully for about a year, my RN102 leaves me not connect to its admin panel more. I've never experienced any problems before, I would just go to the local IP address and it worked. No more. Firefox tells me "unable to connect" quite quickly after I try to connect. IE11 and chromium produce similar errors. My PC is on Win7 x 64. Connection on the other laptop does not work either. -I CAN still reach actions and folders on NAS via Windows and Android!

  Some additional information:

  -RN102
  -updated to 6.2.2 firmware after which it wouldn't let me not connect
  -C' is ethernet wired to the same router as my PC
  -I can ping always correctly IP address, and the name I gave the NAS via a command line
  -Disabling the firewall of Microsofts does not help
  -before he 'broken', I was messing around with external applications, BarracudaDrive and others. Has decided to remove them all, because I do not have it work properly. Delete apps hung the NAS, I pulled the power and rebooted, it.
  -J' also reinstalled the operating system using the reboot with the reset button sequence. After reinstallation, log actions of Win7 works well, but no luck on the administration panel.

  I'm out of ideas. One who helps me go in my hall of fame.

  See you soon,.
  AK

  I looked at the case and see that the problem was due to a problem uninstalling apps, which was a problem known to point 6.2. I am that mark it as resolved.

• XT720: Unable to connect to the network for upgrades

  Hello

  I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

  How can this problem be solved?

  How to get the system through files zip for Android updates?

  Kindly let me know.

  It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

  Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Unable to connect to the PPPoE server with 2 BEFSR41ver

  I had to get a new AT & T DSL line to a new home with new ID and password. I've never had a problem with the router to the old address and the line DSL.  I've reconfigured the router with a new user name and password for PPPoE I got from AT & T for use with their new motoroal they sent me. The modem gives me the internet when I connect the modem directly to the computer.  When I connect the modem to the WAN port of the router with the computer connected to one of the LAN ports on the router, I get "Unable to connect to PPPoE" when I try to access the internet. When I connect the modem to one of the LAN ports with another port LAN from the router to the computer, I don't have the internet, but this is not recommended for the router cable management. With the modem connected to the WAN router and a power cycle performed port, I still get the same error message. I disabled my firewall and still have the same error message. I don't think I have another firewall to operate.  I never had this problem to my old address and line DSL AT & T with different ID and password and the same router.  Anyone know what is happening?  STEIN

  Your problem is that your "modem" is actually a "modem-router" and it uses the same subnet as the BEFSR41 192.168.1.x.  To resolve this issue, follow these steps:

  All first, reset your BEFSR41 factory default, then set the "local IP address" 192.168.2.1

  To do this, follow these steps:

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen).  Then, change the "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the BEFSR41.  Don't worry about this.  Turn off the BEFSR41 and your computer.

  (11) then, using an ethernet cable, wire the ethernet port of the modem to the Internet port on the BEFSR41.  Turn on your modem and enable good start.  Turn on your BEFSR41 and enable good start.  Turn on your computer.  Test your system, it should work.

  If you can not ' response to... ". "in step 9 above, your router is probably dead.  Report with this info.

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. In this case, a report with this problem.

  If you need additional assistance, please state the version of firmware on your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• "unable to connect" iMac to the printer, but other devices peuvent

  I have a HP Officejet which was working fine, then all of a sudden not. When I try to print, I get an error "unable to connect to the printer, will try again in 30 seconds." I deleted the printer several times and added in my preferences, so my iMac can see the printer, but when it comes to print to it, is not going to see it.

  In addition, I have no problem, print on it to my MacBook Pro, nor fact my wife on her MacBook.

  If I type the IP address in a browser on any other device including my iPhone, I can reach HP diagnostics and configuration screen, but my iMac just times out.

  Things I've tried: resetting the printer preferences. Deleting all HP prefs in the library. Updated with the latest version of the software of HP for Snow Leopard. Adding the printer using the IP address. Installed the latest driver from HP, Apple.

  This is a clean installation of 10.6.5 (same OS other Macs are running. This started happening a few days ago and prompted me to do a clean install, as I had other questions. I thought the clean install might clarify the issue, but the problem persists.

  Where did you got your HP software?  Has it labeled as being compatible with 10.6?

  Restart your Mac and your router.