Unable to connect the computers to the homegroup.

Similar Questions

• Unable to join the homegroup on new Inspiron 15 5559

  I had a residential group put in place for a good while on 3 computers desktop and an old Tower, but my new laptop Dell Inspiron 15 5559 with 10 Windows fails to reach.  I get to the point of putting in the right password and clicking NEXT, then the bar keeps of moving from left to right for several minutes, then stops without any messages and not to join.

  Here are the details.  Computer of One Office (a Dell Inspiron 630 with Windows 7 Pro), a former HP with Windows Pro 10 office, an old house built office with Windows 10 Pro (64-bit), and an old Toshiba laptop with 64 bit Windows 7 Home.  All these joined the homegroup very well.  In addition to the homegroup, I have the file & printer sharing power with 4 of them.  On the Dell desktop computer, I have 9 folders and two shared printers.  The new laptop Dell can access shared folders, it is just unable to join the homegroup.  I created the homegroup because I had problems to access 2 shared printers (a Canon IP1600 inkjet and laser Samsung ML-2525) with 10 windows, in case you're wondering why I'm not just with the file & printer sharing instead of homegroup.

  In any case the key is that everything on this new Dell laptop works fine except that I can not join the homegroup, and I'm very curious as to why not.  I did full virus scans with Defender and Norton 360 and have done two scans with MalwareBytes, but no malware has been found.  I also ran "SFC/scannow" and it found no problem either.  I checked to make sure that I put in the security key for the homegroup, and at this point, I am triple ideas.  It please does not restore to the factory settings, because I had this problem since the first day that I got this laptop out of the box before I did any customization. FWIW, I'm no novice in computer science.

  What suggest you?  TIA

  Yesterday I posted a note that I would have found and solved the problem.  I don't know what happened to this post.  The problem was that there was a popup that was actually a pop-under hidden behind a number of open windows.  He said that there was an invalid password.  Of course the note that I had used to set up 4 PCs had a "n" where there is now a "m".  I would like to say that this has changed from n to m somehow otherwise I don't know how I was able to put in place the other 4 PCs.  Anyhoo, the problem is now resolved.

• Unable to connect the XBox 360 to my PC showing 'Impossible to locate.

  Original title: homegroup

  UNABLE TO CONNECT THE XBOX 360 TO MY PC... ERROR CODE ST

  CANNOT LOCATE ATES

  Hi laurent,.

  Thanks for posting your question in the Microsoft Community.

  I suggest you to contact Xbox support to obtain assistance from the link below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  I hope that the information above helps you.

• I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  alias-research-http://www.Amazon.com/s?ie=UTF8&x=0&ref_=nb_sb_ss_i_8_11&y=0&field-keywords=IPhO does % 20headphone % 20adapter & url = % 3Daps & sprefix = 20head % iphone

• Unable to connect the world of Minecraft

  My friend and I we cannot join the worlds in minecraft even we are friends on xbox live. What is the problem? Can you please fix this?

  Hi James,

  According to the description of the problem, you are unable to connect the world in Minecraft on MSN.com. I suggest you to return the article mentioned below and see if it helps you to solve the problem.

  Minecraft: Windows 10 Edition Beta FAQ

  If the problem persists, I suggest to contact the game MSN support and hope that you will get a quick response from their support.

  Support MSN Games

  Welcome to MSN Games Support

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to connect to computers via Remote Desktop on the VPN connection.

  I have a Windows Server 2003 Active Directory network. Connect you to it remotely using an appliance, Sonicwall TZ170 VPN/Firewall DHCP pointing our internal DHCP server so we do not use the Sonicwall DHCP over VPN.

  The area has been recently rebuilt completely charge and the VPN connection was stronger than it has ever been when connecting to computers on our network for the first 2 weeks. In the last few days, however, people had problems connecting on our desktop computers. They can connect to some but not to others, and in the case of a person who needs in particular access to a computer, it can not connect to it all.

  I don't think it's a VPN issue but something to do with the DHCP/DNS/domain controller server. However, I am not able to locate the problem.

  In the past, this same thing was a problem before I took over. We had just a matter to the inconsistency of the connection until I thought I had solved the problem (however short-lived the fix was) with the refurbishment of the domain controller.

  Customers are a mix of Windows XP and Windows 7.

  Any ideas? I will provide all the information I can.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Please repost your question in the above Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to join the homegroup - when you attempt to join I get this message: cannot create a homegroup on this computer

  I tried all the suggested 'fixes' and am still unable to join. My network has worked well until I installed W7. I can create a homegroup on any computer (I have 4 on the network), but no other computers can join. All I get when you are trying to reach is "impossible to create a homegroup on this computer". It is a problen very common, judging from all the complaints I've seen on the forums. With no exaggeration, there are thousands of people are unable to use this 'easy '... home network Please don't tell me to disable my firewall or computer time sync or one of the other "fixes" that do not help.

  Hello

  Since you're so desperate, you can configure the network to the office network.

  It's a little more work than the collective dwelling, but the results are more flexible.

  -----------------------------------------

  Here you have the whole story because what Win 7 can make wise network.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous methods of theWorking Group sharing which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links
  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions
  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  Change-a-group home-password - http://windows.microsoft.com/en-us/windows7/Change-a-homegroup-password
  How to leave a homegroup - http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup
  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Unable to connect the Tablet Latitude running Windows 8 to my PC running windows 7

  I try to connect my Tablet Latitude running Windows 8 to my PC running windows 7 and the PC is telling me it does not find the bluetooth device driver and when it goes to windows update I am fully updated and when it searches it cannot find a driver so, basically that the two cannot communicate with each other

  OT: Dell Latitude ST

  Hello

  1. How do you try to establish a connection between Windows 7 and Windows 8 computers?
  2. which antivirus program is installed on the computers?

  Homegroup is available in Windows 8, Windows RT, and Windows 7. You can join a homegroup on a PC running Windows RT, but you can't create a homegroup or share content with the homegroup.

  I suggest you to see the following link on how to connect Windows 8 computer with Windows 7.

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-other-PCs

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Unable to connect the laptop to the printer in a home network

  I just installed a HP Pavilion dv4 laptop, running windows 7 (64 k) and a router Linksys E-1000 of wireles in my home network, consisting of an HP pavilion a6150y desktop, running MS Vista Edition home premium (32 K), to which a HP Photosmart C4280 printer is connected via a USB port. All internet and e-mail functions work perfectly across the home network, except that I can't print from the laptop to the printer. I understand that the C4280 should function as a print server through the Desktop, but I can't print from the laptop. Heterogeneous operating systems cause inability to print from the laptop? Any suggestions?  The laptop has no problems printing to the C4280 when connected directly via a USB cable to the printer.
  Troubleshooting: I ran across the network installation procedure, but nothing helped. The printer has never worked since installation of network components House (e-100 of Linksys and the HP dv4 laptop) anyone can propose a solution?

  First of all, you need to set file/printer sharing and share the printer. If you have already done this and can successfully transfer a file both ways between the two systems, ignore the information of networking at the end of this post. Then you download from the site Web of HP for Windows 7 64-bit print drivers.

  http://welcome.HP.com/country/us/en/support_task.html

  Install the printer on Windows 7 computer and it should be considered during the installation procedure. If it isn't, then install the printer as a local printer instead. To do this:

  Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

  Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

  Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

  ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

  Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

  If you have not already created your LAN file/printer sharing:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  The Windows 7 network type must be on "Home" or "work". The type of Windows Vista network must be on "private". "Public" is for when you are connected to an Internet connection 'foreign' as an Internet café, at Starbucks or a hotel, etc. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  In Vista, turn on password protected sharing.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. In XP, you can run the Network Setup Wizard or just enable file sharing / print in the Windows XP firewall exceptions. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  MS - MVP - Elephant Boy computers - don't panic!

• I'm unable to connect the Sony Walkman to my PC, receive error message WPD Enhanced peripheral of storage drive has a past problem cannot start [code 10].

  Original title: drive WPD Enhanced password storage has a problem cannot start [code 10]

  I tried to uninstall and install but nothing works I'm unable to connect my sony walkmann more

  It does not charge or sync with the device.

  apears there is a problem with the password for the improved wpd storage disk

  Hello
  1 did you change on your computer before this problem?
  2. What is the model of the Sony walkman?
  3. what happens when you load the device?
  4. What is the brand and model of the computer?
  WPD (Windows Mobile) devices allows computers to communicate with attached and peripheral storage media. WPD offer a flexible and robust way to computers communicate with readers of music, storage devices, mobile phones, cameras, and many other types of connected devices.
  Check if the device works fine on another computer.
  You can also follow the steps in the article mentioned below:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Post your answer for you help in this matter.

• Unable to connect the iphone to the printer

  I have implemented the software and can print wireless from office.  Unable to join the network of the iPhone after that I followed the instructions and enter the password.

  I learned that by adding my printer to my iPhone in accordance with the instructions, it will work correctly and is not be selected under settings wifi works properly every time. Printing from my iPhone works very well with my router selected and connected.  This point is therefore closed.

• Unable to connect the earpiece/headset Bluetooth

  Original title: Bluetooth device

  Hello

  I use a computer windows 7 dell laptop and having succumbed to my last 10 attempts to connect my sony with her bluetooth headset. Also, I went through all the links of responses provided by the site. I also downloaded the software device for her drive. The laptop also shows my SonyBTH under "Devices and Printers". But I'm still not able to connect my SonyBTH even after clicking on the indicated device.

  Please kindly help me with this problem.

  Anyone?

  Thank you

  Afonso Rajalim

  Hi Afonso,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect SonyBTH to the Windows 7 machine and I appreciate the efforts made in the patches that you tried. Let me ask you;

  • Have you been able to connect to the same SonyBTH in the past?
  • Remember to no particular change in the computer before the show?
  • What security software is installed on the computer?
  • What is the model number of your Dell computer?

  There could be several reasons for this cause and diagnose the problem, we will try these steps and check.

  Step 1: Make sure that Windows is configured to accept incoming Bluetooth connections.

  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
  2. Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.

  Step 2: Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  Solving problems with Bluetooth devices compatible (applicable to Windows 7 as well)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Unable to connect the SQL Developer PDB

  Hello

  I am unable to connect to my pdb1 for SQL Developer.

  Oracle@Solaris:~$ lsnrctl status

  LSNRCTL for Solaris: Version 12.1.0.2.0 - Production on 4 January 2016 13:50:37

  Copyright (c) 1991, 2014, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  For Solaris TNSLSNR version: Version 12.1.0.2.0 - Production

  Start date 4 January 2016 10:57:08

  Uptime 0 days 2 h 53 min 29 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/12.1.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/grid/diag/tnslsnr/Solaris/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=solaris) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM' READY State, has 1 operation for this service...

  Service 'cdb01' has 1 instance (s).

  'Cdb01' instance, State LOAN, has 1 operation for this service...

  Service 'cdb01XDB' has 1 instance (s).

  'Cdb01' instance, State LOAN, has 1 operation for this service...

  Service "Pdb1" has 1 instance (s).

  'Cdb01' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  Oracle@Solaris:~$

  SQL Developer:

  Status: Failure-Test failed: listener refused the connection with the following error:

  ORA-12505, TNS:listener is not currently of SID given in connect descriptor

  Type of connection is that fundamental role is SYSDBA

  But I can connect to my CBD01 of SQL Developer.

  //

  Thank you

  Christophe

  SQL Developer:

  Status: Failure-Test failed: listener refused the connection with the following error:

  ORA-12505, TNS:listener is not currently of SID given in connect descriptor

  As another reviewer said Oracle 12 c requires SERVICE_NAME and no SID to connect to the PDB files.

  http://www.Oracle.com/technetwork/articles/database/multitenant-part1-PDBs-2193987.html

  What is a database of the container

  So, what is the big advantage in this configuration, you may ask? Couldn't we have just created several ordinary vanilla instead of several PDB databases? Yes, we could have; but each of these 'plain vanilla' databases would have then his own load of instance (process and memory). PDB do not have an instance associated with them, eliminating this overload. Let's look at the installer with an example. Suppose you have a CBD (database container - the real database that hosts the other PDB files) called CONA, who has a calledPDB1 of the PDB. If you check the Oracle instance, you will see that there is one - that of the CBD. First, let's check the ORACLE_SID:

  [oracle@prosrv1 ~]$ echo $ORACLE_SID CONA
  

  That's all. There is only a single SID; not one for each PDB. Then we will check the process, especially very important that known as 'pmon ":

  See this last sentence above? See this line in the status of listening port you have posted?

  Service "Pdb1" has 1 instance (s).

  Pdb1 has a 'service' - a SERVICE_NAME allows to connect to him and all other PDB files.

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?