Unable to connect to a projector

Similar Questions

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Unable to connect by Satellite Z30 - A - 1 8 external projector

  Hello

  I have problems to connect to this laptop to an external projector.

  When I connect the cable, it recognize the projector and screen is displayed, but after 15-30 seconds, the screen goes black and computer keeps trying to connect again to projector and problem keeps when its connected.

  The connection to the projector is made hollow VGA cable with about 10 meters, I have tested on several other projectors with other cables and the problem persists.

  The computer is new and I have installed the latest drivers. What can I do to fix this?

  Thank you.

  Have you tried to use a shorter cable?
  Not very well but it might be possible that the problem appears due to the cable (10 m).
  That would you say, using a HDMI cable? Have you tested it?

  On the other hand I also recommend a graphics card driver.

  By the way: to switch between the internal and external monitor, you must use the Fn + F5 key combination.
  Note: If you use the simultaneous mode, you must set the internal display resolution to match the resolution of the external display.

• Laptop HP 15-g012ax: unable to connect projector to my laptop

  Help, please

  I would like to ask how to connect the HP 15-g012ax laptop to a projector.  I can't find where to plug them. I really need your answer because it helps me a lot to present my report in our class.

  Thank you

  Hello

  Plug

  Manual

  Your laptop has a HDMI port on the left side:

  

  

  Buy an HDMI cable to connect to the projector with HDMI port.

  Concerning

  Visruth

• Unable to connect the projector to the computer

  Original title *.

  Connect to a projector

  I always connected to a projector on my PC, but this morning when I tried to connect simply does not work. I tried to use Control Panel, but there is no connection to a projector as it always has been.

  Hello

  Please contact Microsoft Community.

  This problem can be caused if the settings and connections are not appropriate.

  To better help you, could you please confirm a number of things like:

  1. Is the projector to connect to a network or is it connected locally?
  2. You did changes to the computer before the show?
  3. You receive an error message?

  Please follow the steps mentioned below and check if that helps:

  Method 1: I suggest you run the troubleshooter of material of t he link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: step 1: You can see the steps from the link to connect to a projector to a laptop:

  Connect to a projector

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-a-projector

  Step 2: If the laptop is connected to a network projector, then check out the link:

  Network projectors: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/network-projectors-frequently-asked-questions

  Hope this information was helpful and let us know if you need more assistance. We will be

  I'm happy to help.

• Unable to connect to app store after iOS iphone 10 6 update

  Hello

  Since the upgrade to IOS 10 my iPhone 6 with stubbornly refuses to connect to the App store. The error message is "unable to connect to the app store, try again."

  The phone is connected to the internet (I can surf and send emails) by wifi. Turn off the wifi and the use of mobile (cellular) only link cause the same error. I also did a reboot hot and cold, without result.

  Any suggestions?

  Thank you

  Bill...

  ANSWER: this theme has the best 3 options. In my case, I had to sign out and in the app store of settings, iTunes and app store. Fixed

  PLE-3598048 http://www.Macworld.co.uk/How-to/iPhone/What-do-If-You-cant-connect-App-Store-AP.

• Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Harry

  Hello

  Go down to itunes apple ID page homepage remove ID, then reconnect again.

  See you soon

  Brian

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• Unable to connect to my yahoo home page after updating iOS

  Unable to connect to my yahoo home page after updating iOS 10

  Hello. Have you tried to remove data from the site under settings > Safari? Could you describe the problem a little more in detail? What happens when you go to the site? You get a login screen? It takes your input?

• Unable to connect to State Bank Anywhere App on my IPhone 6 + after upgrade to IOS 10

  Unable to connect to State Bank Anywhere App for my IPhone 6 + after upgrade to IOS10. Tried uninstalling and reinstalling, but to no avail.

  Contact the developer of the app. They probably need to update the application to ensure compatibility with iOS 10

• Unable to connect to Airport Extreme after updating iOS 10

  Hey guys.

  OK not sure if anyone else has this problem, but I can't connect to my Airport Extreme update IOS 10 my wife is.

  We all have two iPhone 6 and 64 gb & update at the same time.

  We have an ac 802.11 Airport extreme also an extreme dual band of airport & an express airport which none of us can connect to.

  We can connect to the Home Hub 6 provided by our service provider broadband with no problems but it is only in a part of the House that we are unable to connect to my office or at the back of the House.

  Tried resetting the network settings on the phone thought I might ask before having to try to reset back to factory settings base stations.

  Thank you

  FWIW, I upgraded my iPhone SE 5 and Pro iPad to iOS 10 as well, but knows me not any problems connecting to one of my base station AirPort to Wi - Fi.

  Or the other of your iPhones must all problems connecting to other networks in addition to the Home Hub Wi - Fi? In other words, are they only having problems connecting to your AirPort base station? If Yes, do you have someone nearby who also has an AirPort wireless network that you should check your iPhones with?

  In the meantime, let's take a look at the current configuration of your network. We know that you, at least, three airport base stations. What is the exact models of non - 802.11ac extreme and Express?

  These base stations are all linked back to the Home Hub with Ethernet they are all configured for a mobile network?

• Unable to connect to the App Store since the upgrade to IOS 10

  Tried to restart App Store and phone. changed the password and recorded out and back in but still unable to connect. We will, get apps but when I try and download it keeps asking for the password and say that it can not connect. Someone at - it advice?

  Hello CT05,.

  Please ask for assistance with the App Store here in Apple Support communities. I understand how it is important to be able to download my new or existing applications on the App Store. Please try these things to see if we can get this to work for you as expected!

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once you have your backup, please go to appleid.apple.com on your computer or via a web browser. Log in with the Apple ID you are trying to connect to the App Store with. If it connects, take note of the Apple ID and password. Try the same information on the iPhone.

  If this still does not work on the iPhone, please click Settings > Wi - Fi and turn Wi - Fi off. See if you can access the App Store on your cell data. If you can, it means that it some security on the wireless network that you are connected to that is blocking your connection. You won't be able to do this unless you use your cellular data or move you to a new wireless network.

  If you are not able to access the App Store on cellular or wireless data, please open this help article: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. What this does is actually reset some of your default network settings. You have to reenter your password to connect to wireless networks once this is done. Try again.

  Thanks again and have a great rest of your day.

• Unable to connect to the App/iTune stores

  Since the 10 update on my iPhone iOS 6s; When I try to open the App Store or iTunes Store, it says "unable to connect".  If I'm real quick when I open the App Store I can successfully hit a button update B4 I get the Error Message.  It tries to open the iTunes store when I try; but without success.  Everything works fine on our iPhone 5 s and my Mac.

  Ok..

  Try here > If you can not connect to the iTunes Store - Apple Support

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to connect

  Hi all

  I have a Power Mac G3 (blue and white case), processor 400 MHz, 512 MB RAM, 120 GB HDD and currently running OS 9.2.2/OS X 10.4.11 and I am unable to connect to my user profile on OS X.

  The problem started as a loop connection - I have entered my password only to be sent back to the login screen. Following the advice of another site, I deleted 'Preferences' of the user records and records of library system. The system now creates new folders, boots to the login screen, however to enter any letter on the keyboard results in the system locking up in a cursor tip / the "occupied" switches to the Rainbow ball and they're there - I can't do anything else but reset the system or put it to sleep with the power button

  I've done everything I can think of to try and fix it - safe mode displays the same symptoms above, chatty start freezes with a bluescreen once started, fsck in single user mode says that the disk is ok, like the disk first aid under OS 9. I also tried to reconfigure the memory (one of the modules is problematic intermittently, but no problems do not appear with OS 9 (and have not been apparent in the past with OS X) when he's not working - I tried to remove all the modules problem but possible connection problem)

  One thing I have not tried yet is to do a system repair / archive and install - my installation disc is an old version (10.4.1) which is currently installed - this would have an effect on the system in its current state with all my apps and folders present?

  Thank you very much

  Are you sure that your keyboard does not work properly?