Unable to connect the projector to the computer

Similar Questions

• Unable to connect the computer to the network

  original title: networking issues

  According to me, only missing me something very simple. I have 5 computers connected between them and all, but we can speak with others. 3 computers running Win XP and Win 7-2. Bart is running Win XP and is connected by wire to a router, and can talk to the other 4 computers. Lisa is running Win 7 and is connected by wire to a router, and can talk to all computers but Bart. Maggie is running Win XP and is connected to a hub that is connected to the router. Maggie can talk to all the computers, but Bart. Homer is running Win XP and is connected to a hub that is connected to the router. Homer can speak to all computers but Bart. Margin is running Win 7 and is connected to a hub that is connected to the router. Margin can also talk about all the computers, but Bart. I do not understand why I can use Bart to access other computers, but the other computers cannot access to Bart. I know it's probably something simple I'm missing. All the computers are on the same workgroup as well. I used the Network Setup Wizard to configure the computers, so I think everything is the same. I have also two printers connected as well. One is connected to Bart via USB and the other printer is connected to the hub. Everyone can print to one that is connected to the hub. But of course only Bart can print on those connected to it.

  Anyone have ideas of what I'm missing.

  Thanks in advance.

  This is almost certainly due to one of two things.

  First, a firewall on Bart can block incoming connections.  Bart can contact other computers because outgoing requests and incoming responses are allowed through, but Bart unsolicited inbound connections are rejected.  A couple of tests, you can run the following:
  Find the address IP of Bart (assuming it's here on 192.168.1.100)
  Bart ping try another machine (start-> Run-> "cmd") and then enter the command:
  ping 192.168.1.100
  Try a 'ping NetBT' Bart from another machine (the same above commands prompt window enter the command :)
  nbtstat-a 192.168.1.100 (note this must be an uppercase 'A' in '-A')
  Both should give you an answer.  See if either get an answer.
  If you are using Windows Firewall, go to-> Windows Firewall Control Panel, click the 'Exceptions' tab and check that there is a tick next to "file sharing and printers."  In the 'Général' tab, verify that there is NOT a check next to "do not allow exceptions.  If you have other firewall products on your computer, you are yourself here.

  Second, the "Workstation" of Bart service may work OK, but its 'Server' service may not be installed / started.  (The workstation service to Bart communicate with other machines, Server service allows other machines contact Bart).  To check this, bring up the Service window (start-> Run-> "services.msc").  You should see a line marked "Server."  Its status should be "started" and its Startup Type should be "automatic".  Otherwise, as administrator, double-click top and doing it this way.

  HTH,
  JW

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  alias-research-http://www.Amazon.com/s?ie=UTF8&x=0&ref_=nb_sb_ss_i_8_11&y=0&field-keywords=IPhO does % 20headphone % 20adapter & url = % 3Daps & sprefix = 20head % iphone

• Unable to connect the world of Minecraft

  My friend and I we cannot join the worlds in minecraft even we are friends on xbox live. What is the problem? Can you please fix this?

  Hi James,

  According to the description of the problem, you are unable to connect the world in Minecraft on MSN.com. I suggest you to return the article mentioned below and see if it helps you to solve the problem.

  Minecraft: Windows 10 Edition Beta FAQ

  If the problem persists, I suggest to contact the game MSN support and hope that you will get a quick response from their support.

  Support MSN Games

  Welcome to MSN Games Support

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Impossible to connect the computer to the internet after getting a virus

  Firewall settings

  I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
  Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.
  Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).

  I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
  Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.
  Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).

  Which firewall do you use? First, click on start > run > type inetcpl.cpl > Ok. Now, click on the "Advanced" tab On the Advanced tab, you should see a button to "restore the settings advanced". Click on the button. Follow the prompts all to confirm your selection. Then click on the 'Connections' tab > LAN Settings button. Make sure that there is a check mark in the box "Auto-Detection" parameters and that there is NOT a check mark in the box use proxy settings. Try to connect to the internet. Post your results please.

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• software isinstalled, but message comes up to make sure that your device is connected, the computer is not reconizing machine

  the software is installed, but message keeps occurring that make sure your device is connected.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the connection of the device that you get an error message "make sure that your device is connected, the computer is not reconizing machine." I'll be happy to help you with this problem.

  (1) device you're trying to connect?

  (2) how you try to connect the device?

  (3) what software is installed? Are what software you referring?

  (4) have you made changes on the computer before this problem?

  Method 1: I suggest you follow the steps in the link to run the troubleshooter and check if that helps.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can also try uninstalling and reinstalling the drivers and check if the problem persists.

  To resolve this issue, follow these steps:

  1. to open Device Manager, click Start, click files, and research programsand typeDevice Manager. A list of the available items will appear above the search box; Click onDevice Manager. Device Manager opens with the name of your computer to the top and a list of the devices installed on your computer under the name of your computer.

  2. Locate the faulty device in the list of devices, right-click on the device, and then clickUninstall. When a warning message that you uninstall a device in your system, clickOK. Device Manager uninstall the device.

  3. right click on the name of your computer in the Device Manager, then click on Search the hardware changes. Device Manager scan your system and reinstall your device automatically.

  4 right click on the device, and then click Properties. Thegeneral of the device, in theState of the device Properties dialog box tab, you should see the message. This device does not work correctly.

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• Unable to connect the XBox 360 to my PC showing 'Impossible to locate.

  Original title: homegroup

  UNABLE TO CONNECT THE XBOX 360 TO MY PC... ERROR CODE ST

  CANNOT LOCATE ATES

  Hi laurent,.

  Thanks for posting your question in the Microsoft Community.

  I suggest you to contact Xbox support to obtain assistance from the link below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  I hope that the information above helps you.

• I need to connect a projector to my computer while keeping the monitor running Vista

  We would like to hang a projector to my computer, so we can show the results of the race in our pinewood derby. We also owe it to the monitor to work yet. The computer is running Vista Home version. Thank you.

  Hello

  
  You must select the option to duplicate from the link below.
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-a-projector
  
  Note: This also applies to Windows Vista.
  
  Hope this information helps.

• Unable to resolve the computer names of task force

  My Windows Vista laptop only shows itself as visible in the 'file' network and is unable to connect to other computers manually by typing the name (\\computer-name). My Windows 7 and XP workstations can view each other and the Vista laptop except they can't connect to the laptop (network in inaccessible resource).  All 3 are in the same workgroup and I tried to connect without a firewall as well.  The strange thing is when I try to ping other computers from the laptop, the "host is unreachable" if I ping the computer name, but very good pings if I ping to the IP address. If after the ping of the IP address, I ping the hostname again it pings fine. After that Windows 7, the computer icon visible and accessible and the XP machine is manually (but no icon) for a short period of time. After 5-10 minutes or I stop/standby host names can be resolved again and I have to start with ping them.

  I have no idea why, but I've uninstalled and reinstalled the network card driver and it fixed the problem.

• Unable to connect the earpiece/headset Bluetooth

  Original title: Bluetooth device

  Hello

  I use a computer windows 7 dell laptop and having succumbed to my last 10 attempts to connect my sony with her bluetooth headset. Also, I went through all the links of responses provided by the site. I also downloaded the software device for her drive. The laptop also shows my SonyBTH under "Devices and Printers". But I'm still not able to connect my SonyBTH even after clicking on the indicated device.

  Please kindly help me with this problem.

  Anyone?

  Thank you

  Afonso Rajalim

  Hi Afonso,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect SonyBTH to the Windows 7 machine and I appreciate the efforts made in the patches that you tried. Let me ask you;

  • Have you been able to connect to the same SonyBTH in the past?
  • Remember to no particular change in the computer before the show?
  • What security software is installed on the computer?
  • What is the model number of your Dell computer?

  There could be several reasons for this cause and diagnose the problem, we will try these steps and check.

  Step 1: Make sure that Windows is configured to accept incoming Bluetooth connections.

  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
  2. Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.

  Step 2: Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  Solving problems with Bluetooth devices compatible (applicable to Windows 7 as well)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I'm unable to connect the Sony Walkman to my PC, receive error message WPD Enhanced peripheral of storage drive has a past problem cannot start [code 10].

  Original title: drive WPD Enhanced password storage has a problem cannot start [code 10]

  I tried to uninstall and install but nothing works I'm unable to connect my sony walkmann more

  It does not charge or sync with the device.

  apears there is a problem with the password for the improved wpd storage disk

  Hello
  1 did you change on your computer before this problem?
  2. What is the model of the Sony walkman?
  3. what happens when you load the device?
  4. What is the brand and model of the computer?
  WPD (Windows Mobile) devices allows computers to communicate with attached and peripheral storage media. WPD offer a flexible and robust way to computers communicate with readers of music, storage devices, mobile phones, cameras, and many other types of connected devices.
  Check if the device works fine on another computer.
  You can also follow the steps in the article mentioned below:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Post your answer for you help in this matter.

• Unable to connect the iphone to the printer

  I have implemented the software and can print wireless from office.  Unable to join the network of the iPhone after that I followed the instructions and enter the password.

  I learned that by adding my printer to my iPhone in accordance with the instructions, it will work correctly and is not be selected under settings wifi works properly every time. Printing from my iPhone works very well with my router selected and connected.  This point is therefore closed.

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?