Unable to connect to any computer on the local network

Similar Questions

• zero or change username & password for a connection to another computer on the local network?

  When you open the network, and see you computers and or network for the Working Group action, well, I entered accidentally the wrong username / password for the computer, and I can't seem to change the username-password and or reset it.

  On the local network, I have a linux machine using samba, all permissions are correct, since the box vista * can * connect just fine and have access to everything which, however, on the vista box, I checked still remember the name of user and password, and now I can't change it on another account, I need to take it.

  I have searched for hours and I can't seem to find the answer.

  I tried to disable the account on the linux side and this does not, however, so, he says: "access denied", with no way to enter a new username / password!

  Anyone has an idea on how to solve this problem?

  Finally found the answer.

  In the cmd prompt, (Administrator rights), making control userpasswords2, and then tap the Advanced tab and finally, the button manage passwords.

• How the auto connect to a computer on the local network

  Running xp tries to connect to a VISTA computer via wireless LAN.  After restarting the computer, connect to the printer/fax is available!  This connection is established by clicking in Explorer solutions, NETWORK connections, computer and I am prompted for the password and the computer name.  I wish that other users are able to do this more easily.  Is there a primitive command in a DOS command for example dir .../username=/password=?  I wrote a simple procedure to determine if we are connected, but if we don't, then I want to simplify the process.

  Hi elischneider,
   
  You can disable the sharing option of password on your Vista computer to use the printer/fax without entering the login credentials each time.
   
  See the section ""password protected sharing is enabled ' from the following link to do the same thing: "
  Troubleshoot file and printer sharing

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• HP officejet6700 no connection of any computer to the printer

  I bought the printer at the beginning of Feb. 2014 everything was working fine until yesterday, all of a sudden I get the message that I can't print or scan, and it's the same for all the computers in our House. All computers and the printer are connected through our wireless router.  I run the doctor print and scan, but it did not help. And I can not connect to hpconnected more it gives me just a mistake.

  Hi lydemar,

  From what you described, this looks like a problem with the wireless connection. I have found a document that you can use to troubleshoot with these symptoms. "Printer is off-line" Message appears on the computer and the printer does not print.

  Although you may not see a message 'offline' this document will guide you through the steps required to solve the problem.

  I hope this helps.

• Unable to connect to any URL with the "WindowsUpdate" string in it, on any server. Again maybe virus?

  OK, some background on me, just to avoid some types of questions: I'm not an expert in huge windows, but I use it as my office like a bit of a user with power for 10 years, and I've been a professional Unix administrator since almost 15 years; I'm paid to know my way around computers.

  Computer of my nephew, I work remotely via TeamViewer, knows a problem really incredibly strange.  No matter what the URL with "WindowsUpdate" or similar to get connection reset by peer, in IE and FireFox, and apparently in Windows Update too because he can't actually update anything.

  So fine, virus; Well, Yes, there has been a lot of virus, but they are all had: S & D of Spybot, AdAware and Avast all say that it is clean.  The last time I ran TrendMicro Housecall it crashed, but I saw him more than halfway done and he had not found anything like that or the other.

  It cannot be something simple as a parameter of weird registry or hosts file entry, because it is sensitive to the context and occurs with any server.

  Let me explain: when he started to arrive, I thought it was a Windows Update problem specifically. If it is not; This computer can't see http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=fb0ddab0-e9a0-4edc-b3ea-144ff14190b3&cat=&lang=&cr=&sloc=&m=1&p=1, for example, in a browser, apparently because of this "windowsupdate" in there...  But I didn't know that I went and grabbed a update WindowsUpdate manually, and pasted on my server.

  It's when things are weird; It's my server, it has nothing to do with MS, and it serves many users every day very well.

  On my nephew's computer, I get connection reset by peer for this:

  http://teddyb.org/~rlpowell/public_media/WindowsUpdateAgent30-x86.exe

  and this:

  http://teddyb.org/~rlpowell/public_media/WindowsUpdateAgent30-x86.zip

  but NOT the same exact zip file renamed, like this:

  http://teddyb.org/~rlpowell/public_media/harmless.zip

  I assure you, that these two last URL points to exactly the same data (the .exe in a zip file above).

  So the problem seems to actually be URL with the text "windowsupdate" in them, which seems like it should be a piece running of malware to apply, or something like that, but... really doesn't seem like it.

  Normally, I'd just like to fix it, but this case is so bizarre that I think that I really want to figure it out, too.  Maybe it's the sign of a new virus or something?

  -Robin

  Hello

  I ran into the same issue and finally I was able to remedy. I used ComboFix utility, you can find it here . He found only one problem in my system associated with dmio.sys.

  Here's the line of the log file:

  Infected copy of c:\windows\system32\drivers\dmio.sys was found and disinfected

  And now everything works as expected

  Zbynek

• Unable to connect to oracle 10g on the local computer without internet

  Hello
  
  I installed Oracle 10 g and toad on my laptop. Whenever I restart my laptop my IP changes as the network is shared by other machines too. Whenever this happens, I get the error "ORA-12541: TNS:no listner. So, I have to change the IP in tnsnmaes.ora whenever I restart my laptop to connect to the oracle database. Is there no workaround solution so that it is not necessary to edit tnsnames.ora everytime I restart the laptop? How can I connect to the database even if I am not connected to the internet (i.e. not an IP address).
  
  Thank you.

  Your best bet is probably the loopback adapter, which gives you a fake fixed IP of Workaround DHCP.

  Edit: I should learn to read what is better. However, the loopback adapter may still work in your case.

  Published by: johnfliu on March 31, 2009 11:10

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Information system may not collect information. Unable to connect to this computer. Check that the Winmgmt service is running.

  Information system may not collect information.

  Unable to connect to this computer. Check that the Winmgmt service is running.

  My problem has been set by following the steps:

  1. click on start-> type CMD-> right click on CMD of the result-> click on run as administrator

  2. type the command net stop winmgmt and press enter

  3. Open command prompt and click on start and type system32-> open the folder system32 in the result pane.

  4. in the system32 folder open Wbem and locate the repository folder

  5. right click on the repository, then click Rename

  6. change the name of the drop to Repository.old folder

  7. switch back to the command prompt and type net start winmgmt and press ENTER to run command

  8. close all windows and restart the computer and try to Msinfor32.

• vrealize 6.2 unable to connect on any tenants, can connect to the default tenant

  Helping people, I've been scratching my head for 4 days now.

  Environment

  DC - 2012

  Vcac-device 6.2

  identity device 6.2

  IAAS services on windows 2012

  also haven't tried with vcenter sso sso no chance.

  It is a new environment

  the good:-I can connect to the default tenant with the account admin and all domain account that I add access to.

  the BAD

  All new tenants, I create, I am unable to connect to

  I get the error

  401-Unauthorized: access is denied due to credentials not valid.

  You don't have permission to view this directory or page using the credentials you supplied.

  -J' tried to rebuild at least 10 times (about to abandon VCAC and start learning the IAC :-/) - (ran the 6.2 prereq everytime script)

  -all servers are NTP synchronized without delay.

  -All DNS entries are in place with the research front and rear.

  -all services 28 show such registered unit VCAC

  -no error in catalina.out vcac device

  -Although I am accessing a link of tenant https://Vcac-IAAS/Shell-UI-app/Labs -(laboratoires est mon locataire)

  Catalina.out shows holding = "vspehre.local"

  2015-01-22 01:22:13, 915 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 8 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:30, vcac 276: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.endpoint.SsoResponseListener.consumeResponse:77 - you POST'ed to the Websso client library!

  2015-01-22 01:22:30, 276 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:72 - SAMLResponse validation...

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.ValidationState.validateDestination:64 - destination request validation: HttpservletRequest destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/ssoSAML message destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/SSO

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateInResponseTo:158 - optional validation request ID: _cc2719796497ca852f426b742b4a79fe

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:180 - assertion validation...

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.getIDPCertByIssuer:944 - IDP is config for: https://Vcac-ID.ten.local:7444/WebSSO/Saml2/metadata/vSphere.local

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.validateRequestSignature:597 - signature verification SAML message...

  2015-01-22 01:22:30, 305 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:247 - statement analysis...

  2015-01-22 01:22:30, vcac 317: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:319 - NameID: [email protected]

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:320 - NameIDFormat: http://schemas.xmlsoap.org/claims/UPN

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:231 - affirmation of SSO successfully validated

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:105 - validated successfully received SAMLResponse

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:31, 477 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.acquireTokenByCertificate:467 - successfully acquired for the user token: {name: administrator, domain: ten.local}

  2015-01-22 01:22:32, vcac 036: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.renewToken:531 - token successfully renewed for the user: {name: administrator, domain: ten.local}

  I tried to start the deafult Web site using my Vcac-service account (in Internet Information services Manager).

  -all certificates are self-signed

  stores - identitiy are tenant default configured correctly and working for

  -All virtual machines running on SSD without isssue IOPS / s.

  -all licenses have been configured.

  -NO errors in the IIS logs

  MSDTC - without errors or questions

  -MSDTC running on SQL server and server IAAS

  Authentication - MSDTC defined on mutual authentication (also haven't tried no authentication)

  when I try to browser goto https://fqdnofiaas/vcac(shell-ui-app) (from the host local or server IAAS) I get

  you have no power to view this page. the system records all attempts to inappropriate access.

  I suspect the question to an IIS misconfig or any Advisor of Bug?

  THX

  https://Vcac-IAAS/Shell-UI-app/Labs https://Vcac-IAAS/Shell-UI-app/Labs You must have add org/orgname https://vcac-iaas/vcac/org/labs

  https://vcac-caf e, vcac, org, orgName for orgs no by default.

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• XP mode can not access to any computer on the network

  Have Win7 with the virtual machine running in xp mode.  I can not connect to any computer xpmode netwok.  In Win 7, that it connects very well.  I tried to create the "WORKING group" and several other names on all computers and are still in xp mode no other computers. If the computer xpmode appear to any other "Access is denied" is displayed and then it never appears again.  I set up a Win 7 running in xpmode before and had no problems.

  Internet connection works fine all the time.

  Configure XP Mode PC network settings to use the host computer's network card.  For more information, see Windows 7, XP Mode network settings . Boulder computer Maven
  Most Microsoft Valuable Professional

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot configure gmail with messaging metro app error unable to connect. Make sure that the information you entered is correct

  I was able to add an account Gmail for Windows 8 Mail App on my first install and everything worked well. Then bought an SSD and completely installed a new OS of Windows 8 it. Connected with the Live account that I used with the first installation of windows 8. All synchronized. The Mail app has Live accounts and Gmail put in place without having to re-enter the information myself. However, I noticed that Gmail sync never even when I choose sync. Removed from the account to add it again, but have failed so far. Keep gives me the error "unable to connect. Make sure that the information you entered is correct. "Tried to install it on my phone Windows 8 (Nokia 920) and he keeps asking me to re-enter the password. I'm 100% sure that I have no 2-step check set up I checked several times. Never allowed them in the first place.

  At this point, I don't know if it's Google problem or the problem of the Mail application. Any suggestion?

  I also had the same problem. I had no problem for the other three Windows 8 install / computers that I used and the last she has imported all the fine adjustments. However, I had a portable Windows 8 different today and worked alone of my three accounts to Gmail. How I fixed it:

  Of the Mail app: charms > settings > accounts > add account > other account (NOT GMAIL!)
  Click IMAP for account type, then enter your credentials as usual. It connected and synchronized immediately for me.
  Hope this helps!

• How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  I NEED TO ACCESS MY BRPWSER ON DESKTOP FROM ANYWHERE IN THE WORLD... LIKE GMAIL...

  How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  (Personal information removed by the moderator. Please read the Forum rules and guidelines - m)

  Sorry, that Mozilla does not offer a feature like that.

  Check out Xmarks. http://www.Xmarks.com/about/features/overview