Unable to connect to DB user non - SYS

Similar Questions

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Unable to connect in to user account, I forgot my password.

  3 month old laptop; Windows 8:

  I am my system administrator.  I couldn't remember my password, create another user name and password as an administrator.  Now I can't download anything on my laptop because I keep being referred to as the old user name and password (that I don't remember) before a download.  Help, please!

  Hello

  "What to do if you forget your password Windows 8/8.1"

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  If you have forgotten your Windows password, there are several ways to recover or reset:

  • If your PC is on a domain, your system administrator must reset your password.

  • If you use a Microsoft account, you can reset your password online. For more information, see the Web to reset your password page.

  • If you use a local account, use your index of password as a reminder.

  If you've tried these suggestions and still unable to connect:

  • If you have Windows 8.1, you will need to reinstall Windows.

  • If you have Windows RT 8.1, you will need to contact the manufacturer of your PC.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Unable to connect to my user account

  During a double internal SSHD + Mac Mini HARD drive, I have an installation from a week of el capitan, where the BONE is in the main SSHD and users and the data is stored in a 1 TB Hybrid HDD.

  Every day I do a clone carbon copy of each internal drive or separate external drives more a machine time for a third drive just in case.

  Also in case something goes wrong with the second internal drive and free access, I created a second user with administrator privileges with its details of account, stored in the main SSHDD.

  Last night suddenly got a message"you can not connect to the"XXXXXX"user account at this time. Account login failed because an error occurred.

  Now, whenever I try to login, I get the same message. The only way I can access the Mac is through the additional admin user, but of course I can't access my files.

  When I try to do a restore from time machine (I used a 2 hours before fact) she does not offer me the choice to divide catering to both the principal and secondary HARD disk I did on the disc more HARD high school and still the same cannot connect problem repeated.

  Then, I made a carbon copy of the two-disk clone respectively internal external to their SSHDD and the HARD drive and got the same failed to connect in the message.

  Is it possible to be able to again access to my account or just try to save it on my library of 120 GB and start with a fresh install?

  I'm afraid that this disaster could repeat again and maybe the best solution is to replace the main SSHDD with one of larger size, store on my user account and just use the seconday HARD drive to store the photo library?

  Any help please!

  Looks like maybe a bad connection or a bad Ribbon on one of the drives cable.

  What year model is the Mac Mini... ?

  The Mac Mini initially came with two disks or you use a double ribbon cable kit disc...?

  FWIW, I ran a double disk configuration non-fusion (a small SSD and a Hitachi 7200 RPM HARD drive) in my end of 2012 for a time and it worked pretty well. I've never had a problem, but he did grow old two backup discs and I therefore ended up going just a big SSD.

• In Windows XP, unable to connect on another user account, until I log out of the first

  Hello

  I have three users account on my computer. whenever I try to switch to another user, it is not connect up to that I disconnect the first, although I have hepatitis has checked the fast user switching option, but every time I enter another account passwrd and press enter nothing happens. Please, need help.

  Thank you

  Saami

  Is 'Fast User Switching Compatibility' already 'started' and ' automatic? Also check the 'Terminal Services' and 'Remote Procedure Call (RPC) if they have a "Started" and "Autopmatic". You receive error messages?

• Unable to connect in Vista user account, said he will not open a session

  Tried to connect with my password of the user account, said it won't save to can someone please help!

  Hello

  You should always give the exact error message when you post here, otherwise you have to guess the problem

  read this and see if it applies:

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If it's a problem of password:

  This is the information from microsoft on you assist on passwords

  http://support.Microsoft.com/kb/940765

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• "TMS" unable to connect to the user repository.

  Dear,

  We migrated TMS inherited to EP when I supply > users I get "" Failed to connect to the repository of user"and when I go to PE diagnostics lights are showing red, and when I opened the TMS tickets it gives me an error indicating that the services are not running, but when I check the services I see them running. I have attached a few photos that shows the error, please notify

  Hi Jens,

  of course the vcs communication seems not promising, but I would say that the problem lies deeper

  in the TMSPE itself.

  Typical questions:

  * wrong version of java, please try the one that is mentioned in the version deployment guide that you install

  * Please make sure that you have run the installer as administrator

  * Check that the used users and groups have appropriate access

  * Make sure the db connections are ok

  In addition, check the deployment guides is always recommended ;-)

  Hossam: btw, please always mention that you use versions, java, windows, tmspe...

• Unable to connect with a user created in FDQM 11.1.2.0

  I made a user in fdqm 11.1.2.0 and he attributed moyen2 level, but whenever I try to login it gives the following error
  
  "Error: an error occurred in the logging on the system."
  Detail: the system is locked! »
  
  I think that something like "Rights" should be given to the kindly guide.
  
  
  Thank you.

  N ° do as I have said previously. On the TOP bar, logged in as an administrator, click the field that says locked, which is before the code of the adapter. A pop will appear allowing you to open the access system to non-administrative users. When you have activated the lock it will tell open in the POV bar. You will then be able to log on as a user without administrator rights.

• Unable to connect with the user or Windows administrator password

  I bought a HP Compaq Presario B3800. It has Windows XP Professional installed.
  I can't get user or administrator passwords to log on.
  I tried to go into safe mode and and using password crackers, every bit of advice I've had so far and nothing.
  It doesn't have a password for BIOS Windows admin only.
  If anyone has any suggestions short of uninstall and then reinstall Windows it would be greatly appreciated.
  Thank you

  If you bought it with a password - ask the person who sold it to you the password.

  XP - if you do not know the password:

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• I'm unable to connect to the user account.

  my brother gave me his old computer and I can not connect because I don't know his password of account, is it possible that I can make a new or delete its old?

  Monday, May 11, 2015 00:07:22 + 0000, MichaelBicksler wrote:

  my brother gave me his old computer and I can not connect because I don't know his password of account, is it possible that I can make a new or delete its old?

  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you
  do not reinstall Windows properly.

• Unable to connect to anaytics / users removed after failed config OSSO

  1. after a failed attempt of configuation SSO startManagedWebLogic.sh wouldn't start

  2. I modified the file config.xml - jps. Deleting the configuration of sso.

  3 startMangedWebLogic.sh started without problem.

  4 startMangedWebLogic.sh starts, past market... but it seems that all the users have disappeared. Including BISystemUser (I checked in the console of administration under Security - users.

  Here are the errors I get:

  more than 53

  Caused by: oracle.security.jps.internal.jaas.module.AuthenticationException: [Security: 090304] authentication failure: user BISystemUser javax.security.auth.login.FailedLoginException: [Security: 090302] authentication failure: User BISystemUser refused

  at oracle.security.jps.wls.jaas.module.authentication.WlsUserAuthenticator.authenticate(WlsUserAuthenticator.java:61)

  at oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule.login(JpsUserAuthenticationLoginModule.java:62)

  ... more than 63

  Caused by: javax.security.auth.login.FailedLoginException: [Security: 090304] authentication failure: user BISystemUser javax.security.auth.login.FailedLoginException: [Security: 090302] authentication failure: User BISystemUser refused

  at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)

  to com.bea.common.security.internal.service.LoginModuleWrapper$ 1.run(LoginModuleWrapper.java:110)

  at java.security.AccessController.doPrivileged (Native Method)

  at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)

  at sun.reflect.GeneratedMethodAccessor326.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)

  to javax.security.auth.login.LoginContext.access$ 000 (LoginContext.java:186)

  to javax.security.auth.login.LoginContext$ 4.run(LoginContext.java:683)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)

  at javax.security.auth.login.LoginContext.login(LoginContext.java:579)

  at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)

  at sun.reflect.GeneratedMethodAccessor324.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to com.bea.common.security.internal.utils.Delegator$ ProxyInvocationHandler.invoke (Delegator.java:57)

  to $Proxy36.login (Unknown Source)

  to weblogic.security.service.internal.WLSJAASLoginServiceImpl$ ServiceImpl.login (WLSJAASLoginServiceImpl.java:89)

  at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)

  at sun.reflect.GeneratedMethodAccessor328.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to com.bea.common.security.internal.utils.Delegator$ ProxyInvocationHandler.invoke (Delegator.java:57)

  to $Proxy54.authenticate (Unknown Source)

  at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)

  at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)

  at weblogic.security.services.Authentication.doLogin(Authentication.java:133)

  at weblogic.security.services.Authentication.login(Authentication.java:74)

  at weblogic.security.services.Authentication.login(Authentication.java:51)

  at oracle.security.jps.wls.jaas.module.authentication.WlsUserAuthenticator.authenticate(WlsUserAuthenticator.java:56)

  ... 64 more

  >

  < 8 August 2013 11:33:43 AM MDT > < error > < oracle.webservices.service > < OWS-04115 > < an error occurred for the port: {http://www.sigmadynamics.com/schema/services/RpcService} RpcPort: oracle.fabric.common.PolicyEnforcementException: FailedAuthentication: the security token cannot be authenticated... >

  < 8 August 2013 11:33:43 AM MDT > < error > < oracle.wsm.resources.security > < WSM-00279 > < the following error Message is received on the client side of the service: -.

  FailedAuthentication: The security token cannot be authenticated.

  Client-side policy is: -.

  Oracle/wss_username_token_client_policy.

  The service url endpoint is: -.

  http://s/RPC .

  Keystore properties: -.

  {}.

  Properties are in the context of the message (partial list): -.

  {javax.xml.ws.security.auth.username = BISystemUser, javax.xml.rpc.security.auth.username is BISystemUser}.

  PolicyReference OverrideProperty:

  []

  Policy configuration properties (some of them can be replaced by properties in the message context or PolicyReference, about the order of precedence of the properties, see documentation);

  {key = basic.credentials - csf = ultimateReceiver role}.

  Other related information: -.

  {oracle.integration.platform.common.subject = Subject: NULL}

  }. >

  < 8 August 2013 11:33:43 AM MDT > < error > < oracle.webservices.jaxws > < BEA-000000 > < endpoint call error " " http://:9704/WS/RPC 'of the client; Client-side policies: [oracle/wss_username_token_client_policy] >

  Solved... My ldap has been the problem. I had a backup and restore.

• After the removal of Norton Antivirus, unable to connect to my user profile

  I deleted Norton AV with their tool.now windows does not load beyond the screen ", click on your name" theres no name click on, no menus, nothing...  Help, please

  George

  Hi GEORGE CAUTTELET,.

  Check if the computer can be started in safe mode and last known good configuration mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

   http://support.Microsoft.com/kb/307852

• Unable to connect to the interface user APIC

  Hello

  I erased the APIC servers configuration using "eraseconfig setup. I did this several times before and I've never had problems.

  Today, I followed the same process as before and rebuilt the cluster, but now I am unable to connect to the user interface. I get the following error of three servers:

  "REST datastore user authorization endpoint is not initialized - check fabric composition State of this node of tissue.

  Thank you

  Ben

  Ben,

  Access the console or the kvm to each controller APIC MMIC.

  Please try to connect to all the APICs 3 using the 'rescue-user' user name.  There should be no password because you have disabled the configuration...

  After scoring in each APIC, run and screen captures the output of the command 'acidiag avread'.

  Please reach the exits in your answer or check and verify the name of "tissue" on each APIC. They must match.  If not, you will need to "configuration eraseconfig" each APIC again and configure the APICs via the initial configuration script.

  Thank you

  T.

• Unable to connect

  Hi all

  I have a Power Mac G3 (blue and white case), processor 400 MHz, 512 MB RAM, 120 GB HDD and currently running OS 9.2.2/OS X 10.4.11 and I am unable to connect to my user profile on OS X.

  The problem started as a loop connection - I have entered my password only to be sent back to the login screen. Following the advice of another site, I deleted 'Preferences' of the user records and records of library system. The system now creates new folders, boots to the login screen, however to enter any letter on the keyboard results in the system locking up in a cursor tip / the "occupied" switches to the Rainbow ball and they're there - I can't do anything else but reset the system or put it to sleep with the power button

  I've done everything I can think of to try and fix it - safe mode displays the same symptoms above, chatty start freezes with a bluescreen once started, fsck in single user mode says that the disk is ok, like the disk first aid under OS 9. I also tried to reconfigure the memory (one of the modules is problematic intermittently, but no problems do not appear with OS 9 (and have not been apparent in the past with OS X) when he's not working - I tried to remove all the modules problem but possible connection problem)

  One thing I have not tried yet is to do a system repair / archive and install - my installation disc is an old version (10.4.1) which is currently installed - this would have an effect on the system in its current state with all my apps and folders present?

  Thank you very much

  Are you sure that your keyboard does not work properly?

• I am unable to connect to my windows 7 Professional

  Hello

  I played with the local security policy, and I am unable to connect to the user account. It says username or password is incorrect. Here's what I did:
  Local security policy > Security Options
  Interactive logon: do not display last user name: disabled
  Interactive logon: require no CTRL + ALT + DELETE: disabled
  I disconnected and then it asked me to press CTRL + ALT + DELETE. It asks me to enter the user name and password. Then I entered the right username and password and it says "username and password invalid." When I get the user name "Administrator" or "guest" he says 'administrator or guest account is disable. Contact the system administrator.
  Help kindly with an appropriate solution.
  Thank you
  Gregory Mhatre
  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before you have played with security options.