Unable to connect to starter kit 2.0 Robotics

Similar Questions

• Unable to connect win7 starter to xp printer error message: "not enough server storage is available to process this command."

  When I tried to connect my Win7 starter Netbook on my HP C5280 printer shared in my XP Pro SP3 desktop computer, this error message until I install the appropriate driver

  PS:
  1 - Win7 allows me to choose the printer in XP to connect to.
  2 - I tried to create or increase the value of "IRPStarckSize" in the registry, in computers
   
  Thank you for your help

  Hello

  Thank you for your quick response.
  I solved the problem as follows:
  1 correct the evil of "IRPStackSize": instead, I wrote IRPStarckSize! " in the registry
  2. create / change the value of ""IRPStackSize ' to '25' in XP and Win7 Starter registry "
  4 - restart both computers.
  5 -Add a printer in Win7 starter, using 'Add a printer pop-up menu'
  6 - Select "create a new port. Select "Local Port" as the port type.
  7. in the "Enter a port name" box, type the address in the following format:
       \\ my XP Pro SP3 utilisateur\Mes shared the name of the HP C5280 printer 
  8 - click Next
  9 - Choose the appropriate driver in the list of drivers.
  If no driver available, click the Windows Update button, wait for the process finishes and then look for the
  driver again.
  10. complete the installation by printing a test page.
  Hope this will help other members of the Microsoft Community.
  PS installed anti software virus in my computer have no impact in my case.

• TBird 31.5.0 to 31.6.0 update. Download now unable to connect. Have stopped/started TBird and even restarted Win7. Any suggestions?

  On the second PC, worked with Tbird 31.5.0. Advice needed to level. Started automatic level to 31.6.0. Immediately restart TBird, I received the message unable to connect to live.mozellamessaging.com instead of normal greeting on half lower the window. If I try to do a "get Messages", the following message at the bottom tells " pop.earthlink.net connection as it is so, but it just hangs there.»
  I restarted TBird and even rebooted the system Win7 nothing helps. I watched the TBird account settings and they seem OK. Any suggestions on where to start?

  Thank you. I checked Norton AV and changed the auto setting allow and which seemed to fix the problem.

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• After logon Windows 7 my PC starts but displays the directed message "unable to connect to a windows service.

  Continue message "Windows does not have to connect to the System Event Notification Service service.»

  Unable to connect to the internet or home network. Cannot 'see' router, although only connected by LAN & Wireless N adapter (even if the wireless adapter has stopped working since the problem occurred).  Router is fine as I can connect the laptop to wireless internet and LAN. The PC is very slow and the glass on the toolbar icons have been replaced by the standard version. Most of the software on the PC runs but I can't access to things like the event log.

  Running SCF / Scannow. CHKDSK and made a complete analysis with Zone Alarm Extreme Security which none have discovered something wrong. I wonder if it is a virus on Board that is not windows & cannot be treated within MSDOS.  If this is the case how get Zone Alarm to sweep to the back?

  My system is 64 bit, with Intel CORE I7 clocked at 2.8 GHz, 8 GB RAM & 2x1.5TB disks in a RAID 1 (mirror) configuration.

  Any help ressemelable the problem would be appreciated

  Hi Clem,

  1. you made any hardware or software comes to the computer before the show?

  2. is the computer connected to a network domain?

  This problem occurs when a new disc is added to the system while the background services always begin.

   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  You can check if System Event Notification Service is enabled and set to automatic.

  
  Steps to follow:

  1. click on start, select run and type services.msc

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.
   
  Method 2:
  Download and apply the patch using the link:
  The Office will not load and displayed only a black or blue background after you log on to a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/2590550
   
  Method 3:
  a. click the Start button.

  b. type cmd in the search text box.

  c. press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  d. type netsh winsock reset in the command line shell, and then press the Enter key.

  e. restart the computer.

   

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  For assistance with Zone Alarm, publish the query in the Forum Zone Alarm.

  Reference:

  http://www.ZoneAlarm.com/security/en-us/community/user-forum-agreement.htm

   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I'm unable to connect the Sony Walkman to my PC, receive error message WPD Enhanced peripheral of storage drive has a past problem cannot start [code 10].

  Original title: drive WPD Enhanced password storage has a problem cannot start [code 10]

  I tried to uninstall and install but nothing works I'm unable to connect my sony walkmann more

  It does not charge or sync with the device.

  apears there is a problem with the password for the improved wpd storage disk

  Hello
  1 did you change on your computer before this problem?
  2. What is the model of the Sony walkman?
  3. what happens when you load the device?
  4. What is the brand and model of the computer?
  WPD (Windows Mobile) devices allows computers to communicate with attached and peripheral storage media. WPD offer a flexible and robust way to computers communicate with readers of music, storage devices, mobile phones, cameras, and many other types of connected devices.
  Check if the device works fine on another computer.
  You can also follow the steps in the article mentioned below:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Post your answer for you help in this matter.

• I have Adobe Reader DC, but have just started to give a message that Adobe is unable to connect to the DDE server, what can I do?

  I have Adobe Reader DC, but have just started to give a message that Adobe is unable to connect to the DDE server, what can I do?

  Hi johnf49911817,

  * Try the solutions below: -.

  Solution 1) (this error occurs when you have more than 1 process of Acrobat running)

  (1) go to the task by pressing Ctrl + Alt + Del Manager

  (2) go to the process in the Task Manager

  (3) terminate all processes associated with Acrobat

  (4) start Acrobat again.

  Solution 2) open Acrobat access to menu help & repair installation.

  Solution 3) control the association of file on your system.

  Solution 4) course for HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and replace the key 'AcroviewA11' 'AcroviewR11.

  Kind regards

  Christian

• Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Hi qksdjhfb,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• SGC does not start - unable to connect to the database

  Hi all

  My development/test environment is unbootable SGD. This has really we stopped in our tracks...

  He'll start the WebTier, but CMS will not come to the top:

  [Journal of the oracle@ora-emcc] $ $OMS_HOME/bin/emctl status SGD

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  WebTier is in place

  Oracle Management Server does not work for the following reason:

  Unable to connect to the repository database. SGD will be automatically restarted once he identifies database and the listener are on the rise.

  Try to check the details SGD results in an error as well:

  [config oracle@ora-emcc] $ $OMS_HOME/bin/emctl status who-details - sysman_pwd $SYSMAN_PWD

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  Exception in thread "main" java.util.MissingResourceException: can't find bundle for the base oracle.security.jps.internal.common.resources.keystore.KeyStoreResources, locale name

  at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)

  at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)

  at java.util.ResourceBundle.getBundle(ResourceBundle.java:952)

  to oracle.security.jps.util.JpsBundle. < init > (JpsBundle.java:70)

  at oracle.security.jps.util.JpsBundle.getResourceBundle(JpsBundle.java:151)

  at oracle.security.jps.util.JpsBundle.getResourceBundle(JpsBundle.java:106)

  at oracle.security.jps.JpsLocalizableException.getResourceBundle(JpsLocalizableException.java:157)

  at oracle.security.jps.JpsLocalizableException.getLocalizedMessage(JpsLocalizableException.java:140)

  at oracle.security.jps.JpsLocalizableException.getLocalizedMessage(JpsLocalizableException.java:131)

  at java.lang.Throwable.toString(Throwable.java:343)

  at java.lang.String.valueOf(String.java:2826)

  at java.lang.StringBuilder.append(StringBuilder.java:115)

  at java.lang.Throwable.printStackTraceAsCause(Throwable.java:536)

  at java.lang.Throwable.printStackTraceAsCause(Throwable.java:545)

  at java.lang.Throwable.printStackTraceAsCause(Throwable.java:545)

  at java.lang.Throwable.printStackTrace(Throwable.java:516)

  at org.apache.log4j.spi.ThrowableInformation.getThrowableStrRep(ThrowableInformation.java:59)

  at org.apache.log4j.spi.LoggingEvent.getThrowableStrRep(LoggingEvent.java:342)

  at org.apache.log4j.WriterAppender.subAppend(WriterAppender.java:304)

  at org.apache.log4j.RollingFileAppender.subAppend(RollingFileAppender.java:234)

  at org.apache.log4j.WriterAppender.append(WriterAppender.java:159)

  at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:230)

  at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:65)

  at org.apache.log4j.Category.callAppenders(Category.java:203)

  at org.apache.log4j.Category.forcedLog(Category.java:388)

  at org.apache.log4j.Category.error(Category.java:319)

  at oracle.sysman.emctl.oms.PrintOMSSetupInfo.main(PrintOMSSetupInfo.java:240)

  In the WebLogic administration Console, I see the BEEP, EMGC_ADMINSERVER, and EMGC_OMS1 are all in the State Running and health Ok.

  Our servers SGD and OMR are (and have always been) 2 different machines. The database on OMR has always been (and is currently) high and available.

  Checking that I can connect to the database of repository on the SGD server OMR:

  [oracle@ora-emcc ~] $ sqlplus sysman / $SYSMAN_PWD@ora-emccdb:1521 / emccdb

  SQL * more: version 11.1.0.7.0 - Production on Thu Nov 10 23:34:53 2013

  Copyright (c) 1982, 2008, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL >

  Any suggestion will be highly appreciated.

  Ed

  Hi Mathieu,

  Thanks for the comments. I just got an update of Oracle on the SR with a few more instructions on different things to try/run.

  I met problems with Weblogic in step 1 and could not understand the multitude of possible causes. After some googling I found others who has ended up just restart that did the trick. It worked for me as well as far as I can see now. I'll do some tests to check, but well.

  Thank you

  Ed

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• Unable to connect

  Hi all

  I have a Power Mac G3 (blue and white case), processor 400 MHz, 512 MB RAM, 120 GB HDD and currently running OS 9.2.2/OS X 10.4.11 and I am unable to connect to my user profile on OS X.

  The problem started as a loop connection - I have entered my password only to be sent back to the login screen. Following the advice of another site, I deleted 'Preferences' of the user records and records of library system. The system now creates new folders, boots to the login screen, however to enter any letter on the keyboard results in the system locking up in a cursor tip / the "occupied" switches to the Rainbow ball and they're there - I can't do anything else but reset the system or put it to sleep with the power button

  I've done everything I can think of to try and fix it - safe mode displays the same symptoms above, chatty start freezes with a bluescreen once started, fsck in single user mode says that the disk is ok, like the disk first aid under OS 9. I also tried to reconfigure the memory (one of the modules is problematic intermittently, but no problems do not appear with OS 9 (and have not been apparent in the past with OS X) when he's not working - I tried to remove all the modules problem but possible connection problem)

  One thing I have not tried yet is to do a system repair / archive and install - my installation disc is an old version (10.4.1) which is currently installed - this would have an effect on the system in its current state with all my apps and folders present?

  Thank you very much

  Are you sure that your keyboard does not work properly?

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!