Unable to connect to the ad hoc network

Similar Questions

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• Unable to connect to the ad hoc network created in windows vista

  Hello

  I created an ad hoc network on the laptop to my sister that is running windows Vista Home Basic Edition x 86.
  I installed ubuntu 11.04 alongside windows 7 on my laptop. I can find the network under ubuntu, but I can't connect to it.
  Can someone help me with this please?

  Hello

  Method 1:
  You can networks troubleshooting wireless with Ubuntu and check:
  https://help.Ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide

  Method 2:
  If you have problems with Windows networks and then check out the link
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the internet, no network adapter icon?

  I received a computer toshiba satellite laptop which should have windows 7 ultimate on, however it does not connect to the internet wireless or ethernet, I lived all the troubleshooting suggestions, but there is no network adapter icon to activate. The laptop was of an elderly aunt who barely used and was not very tech savvy so I don't think that its been damaged (it has not been used for some time) any help would be greatly appreciated.

  Are there devices listed as "other"?

  If there is, run as 'Administrator' Device Manager and do a right click, properties, [pilot tab] and try to "roll back driver" (I guess the update driver will not work if the PC is not connected to the internet, but it can also be worth a try)

  If this does not work, try to force the hardware detection - http://www.pctips3000.com/how-to-scan-windows-7-computer-for-newly-attached-hardware/

  If still no joy, use another PC to go to the support site for the brand/model PC and download the latest driver available for your PC and the operating system network card (32/64 bit, etc.) and transfer it to the PC via a USB or SD card. Then try to install it.

  BIOS - how you access the BIOS will depend on the brand / model of the PC and the BIOS itself, but it gives an example: http://pcsupport.about.com/od/fixtheproblem/ht/accessbios.htm give it a read and see if you can follow. Ensure that you change and not change things randomly.

• Unable to connect to the Wifi OPEN network that requires a confirmation of the terms in a login page

  I tried to connect to open Wifi network that requires the confirmation of the terms in the login page using my Windows 8 tablet EI.  The login page appear not as I therefore had no way to verify the confirmation as a result of the inability to use the wifi network.  Is it possible to force the connection to the login page?  Thank you!

  Hello

  Thanks for posting your request here in the Microsoft Community.

  This issue could be caused due to any third-party security software or a firewall. I would like to this firewall security software is installed on your computer?

  Temporarily disable Windows Firewall and check if the problem persists. If you use a third party firewall then try disabling that as well. This is to check if the problem is caused due to any firewall related issue or not.

  See the following article from Microsoft Help to disable the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Firewall-from-start-to-finish

  Note: refer to the "Turn Windows Firewall on or off" section in the following article from Microsoft Help to disable the Windows Firewall. The steps apply as well to Windows 10 Technical Preview.

  Warning: deactivate temporarily the Antivirus\Firewall, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  If this problem is specific to a Web page, then you will need to contact the ISP as Karthik Vengaloor mentioned in his answer.

  Please reply with the status of the issue so that we can better help you.

• Portege Z30 - A - unable to connect to the GSM mobile network.

  Toshiba Portege Z30 - A Windows 7 Prof

  When I try to connect to a modem GSM receives the error:
  "Network connection based on a mobile broadband connection failed with the error code: 1.

  (GSM card works properly in other devices)

  Hello

  According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
  One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.

  Recommend you to check the configuration.

• OTP-S6200 unable to connect to the Sony entertainment network

  I have a new BDP-S6200 and I can't connect to Sen. I have the network set up correctly which means that when I perform network diagnostics it reports 'network connections are correct. I've tried wired and wireless. One of the first things I did was download and install the update to firmware M21. R.0112.

  I also tried a reset and reconfiguration and turn off and unplug the unit for 10 seconds.

  System Information also indicates "LINK Connection Status: successful" and "Provisioning Server Connection Status" -"."

  Found a solution to my problem in another topic. It was to go to network settings and to change primary DNS Server 8.8.8.8 and 8.8.4.4 secondary DNS server. (Must manually configure your IP address, etc.). After that go to SEN which is the menu item right on my X-bar menus, press 'OPTIONS' on remote, select "Update List". At this point, since I've never been this well before, asked me to register the device to www.sonyentertainmentnetwork.com. Then it worked.

• locked settings by the adiministrator system and unable to connect with the new wireless network

  I changed my ISP and routers.  I need to change the settings to the new router wireless.  However, when I try to access the network settings on the printer through the screen on the printer, it is said that it is locked by the system administrator.  I am the admin.  Where can I access it without being on the network?  I tried to reset to the default values of factpry, but the same problem exists; It is blocked by the system administrator.

  I was able to solve the problem.  I went through the set up using the USB cord.  Then I switched it to wireless technology.

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• XT720: Unable to connect to the network for upgrades

  Hello

  I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

  How can this problem be solved?

  How to get the system through files zip for Android updates?

  Kindly let me know.

  It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

  Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Unable to connect to the Wi - Fi "Verizon MiFi" network

  Using the Windows XP w/SP3 Media Center Edition operating system. Recently got a Verizon Wireless MiFi wireless hotspot. The computer will connect while the device is plugged into the USB port but not connect wireless. I get the following error message: unable to connect to the network Wi - Fi "Verizon MiFi. To make another attempt, press the retry button. If you want to change the permissions for "Verizon MiFi", press the button change the credentials.

  I tried the Microsoft #871122 articles, 313242, 815485, 826942, 884787 and 915727.

  Any ideas? I'm at the end of my rope.

  Moreover, my laptop that runs Vista operating system connect wireless.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET