Unable to connect to the DB home page in Windows XP

Similar Questions

• Unable to connect to my yahoo home page after updating iOS

  Unable to connect to my yahoo home page after updating iOS 10

  Hello. Have you tried to remove data from the site under settings > Safari? Could you describe the problem a little more in detail? What happens when you go to the site? You get a login screen? It takes your input?

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to the GET STARTED page

  Hello
  
  First of all, I'm sorry, I did a search and saw that many posts on this issue but on each of them finishing their answers once a user asked "did you do this or that?' or they just stopped posting... the more I saw a few topics where he worked magically subsequently , but no real instructions.
  
  Thus, the problem: I installed XE 11g, no apparent problems during installation (no warning so I guess everything is OK), tried the link START, but it says it cannot connect.
  
  System: Win XP PRO SP3, 2 GB of ram using Firefox 7.0.1
  DB: Oracle 11g Express Edition
  Antivirus: avast 6 (firewall included), but is disabled during the tests...
  
  lsnrctl:

  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
  ction
  Start Date                05-OCT-2011 02:36:42
  Uptime                    0 days 0 hr. 21 min. 51 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Default Service           XE
  Listener Parameter File   E:\Database\Oracle\app\oracle\product\11.2.0\server\network\admin\listener.ora
  Listener Log File         E:\Database\Oracle\app\oracle\diag\tnslsnr\EASTFRONTIERS03\listener\alert\log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=EASTFRONTIERS03)(PORT=1521)))
  Services Summary...
  Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "xe" has 1 instance(s).
    Instance "xe", status BLOCKED, has 1 handler(s) for this service...
  The command completed successfully

  AMT:

  XE =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = XE)
      )
    )
  
  EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      )
      (CONNECT_DATA =
        (SID = PLSExtProc)
        (PRESENTATION = RO)
      )
    )
  
  ORACLR_CONNECTION_DATA = 
    (DESCRIPTION = 
      (ADDRESS_LIST = 
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) 
      ) 
      (CONNECT_DATA = 
        (SID = CLRExtProc) 
        (PRESENTATION = RO) 
      ) 
    ) 

  listener:

  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = PLSExtProc)
        (ORACLE_HOME = E:\Database\oracle\app\oracle\product\11.2.0\server)
        (PROGRAM = extproc)
      )
      (SID_DESC =
        (SID_NAME = CLRExtProc)
        (ORACLE_HOME = E:\Database\oracle\app\oracle\product\11.2.0\server)
        (PROGRAM = extproc)
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
        (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
      )
    )
  
  DEFAULT_SERVICE_LISTENER = (XE)

  Services:

  OracleJobSchedulerXE
  OracleMTSRecoveryService
  OracleServiceXE (started)
  OracleXEClrAgent
  OracleXETNSListener (started)

  sqlplus:

  SQL> connect
  Enter user-name: SYS
  Enter password:
  ERROR:
  ORA-01089: immediate shutdown in progress - no operations are permitted
  Process ID: 0
  Session ID: 0 Serial number: 0

  alert_xe:

  Wed Oct 05 02:37:35 2011
  AUD: OS Error = 1717 encountered while writing audit record
  AUD: OS Error = 1717 encountered while writing audit record
  Starting ORACLE instance (normal)
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  Shared memory segment for instance monitoring created
  Picked latch-free SCN scheme 2
  Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
  Autotune of undo retention is turned on. 
  IMODE=BR
  ILAT =18
  LICENSE_MAX_USERS = 0
  SYS auditing is disabled
  Starting up:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
  Using parameter settings in client-side pfile E:\DATABASE\ORACLE\APP\ORACLE\PRODUCT\11.2.0\SERVER\CONFIG\SCRIPTS\INIT.ORA on machine EASTFRONTIERS03
  System parameters with non-default values:
    sessions                 = 172
    memory_target            = 760M
    control_files            = "E:\DATABASE\ORACLE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
    compatible               = "11.2.0.0.0"
    db_recovery_file_dest    = "E:\Database\Oracle\app\oracle\fast_recovery_area"
    db_recovery_file_dest_size= 10G
    undo_management          = "AUTO"
    undo_tablespace          = "UNDOTBS1"
    remote_login_passwordfile= "EXCLUSIVE"
    dispatchers              = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
    shared_servers           = 4
    job_queue_processes      = 4
    audit_file_dest          = "E:\DATABASE\ORACLE\APP\ORACLE\ADMIN\XE\ADUMP"
    db_name                  = "XE"
    open_cursors             = 300
    diagnostic_dest          = "E:\DATABASE\ORACLE\APP\ORACLE"
  Wed Oct 05 02:37:53 2011
  PMON started with pid=2, OS id=2308 
  Wed Oct 05 02:37:53 2011
  PSP0 started with pid=3, OS id=1168 
  Wed Oct 05 02:37:54 2011
  VKTM started with pid=4, OS id=1920 at elevated priority
  VKTM running at (10)millisec precision with DBRM quantum (100)ms
  Wed Oct 05 02:37:54 2011
  GEN0 started with pid=5, OS id=372 
  Wed Oct 05 02:37:54 2011
  DIAG started with pid=6, OS id=1580 
  Wed Oct 05 02:37:54 2011
  DBRM started with pid=7, OS id=1552 
  Wed Oct 05 02:37:54 2011
  DIA0 started with pid=8, OS id=2668 
  Wed Oct 05 02:37:54 2011
  MMAN started with pid=9, OS id=2132 
  Wed Oct 05 02:37:54 2011
  DBW0 started with pid=10, OS id=3716 
  Wed Oct 05 02:37:54 2011
  LGWR started with pid=11, OS id=3952 
  Wed Oct 05 02:37:54 2011
  CKPT started with pid=12, OS id=2992 
  Wed Oct 05 02:37:54 2011
  SMON started with pid=13, OS id=2616 
  Wed Oct 05 02:37:54 2011
  RECO started with pid=14, OS id=1764 
  Wed Oct 05 02:37:54 2011
  MMON started with pid=15, OS id=4012 
  Wed Oct 05 02:37:54 2011
  starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
  starting up 4 shared server(s) ...
  ORACLE_BASE from environment = E:\Database\Oracle\app\oracle
  Wed Oct 05 02:37:55 2011
  AUD: OS Error = 1717 encountered while writing audit record
  Wed Oct 05 02:37:54 2011
  MMNL started with pid=16, OS id=1516 
  Wed Oct 05 02:37:57 2011
  AUD: OS Error = 1717 encountered while writing audit record
  AUD: OS Error = 1717 encountered while writing audit record
  Shutting down instance (immediate)
  Shutting down instance: further logons disabled
  Stopping background process MMNL
  Stopping background process MMON
  License high water mark = 1
  All dispatchers and shared servers shutdown
  AUD: OS Error = 1717 encountered while writing audit record
  Starting ORACLE instance (normal)
  Wed Oct 05 02:38:02 2011
  AUD: OS Error = 1717 encountered while writing audit record
  AUD: OS Error = 1717 encountered while writing audit record
  Wed Oct 05 02:38:03 2011
  AUD: OS Error = 1717 encountered while writing audit record
  AUD: OS Error = 1717 encountered while writing audit record
  Wed Oct 05 02:38:03 2011
  AUD: OS Error = 1717 encountered while writing audit record
  AUD: OS Error = 1717 encountered while writing audit record
  Wed Oct 05 02:38:03 2011
  AUD: OS Error = 1717 encountered while writing audit record
  AUD: OS Error = 1717 encountered while writing audit record

  From what I could gather other messages here (and), the problem is that I have nothing listening on 8080. Other than that, everything looks OK (I think).
  So, can anyone say me\help me on why this one is not start? I have reinstalled this 6 times and still can not find the problem... (as you have seen, I even replaced the tns with paranoia 127.0.0.1 hostname). It is seriously makes me crazy. Everything I wanted (from the problem itself in even a step by step for Dummies) shows an installation, then the interface work... I see some questions about the "I can't connect to the...» "but most are left unanswered :(
  
  
  Thanks in advance!
  
  P.S. Let me know if I forgot to mention something relevant

  TheNomad wrote:
  And Yes, EV has been disabled during installation.

  Then, probably the best and easier to move now is to allow (return to the standard) and uninstall and reinstall XE.

  If the script still exists after re - install, then troubleshooting can continue.

  It seems you missed my post above with the startup command.
  

  What you mean? I posted at the exit.

  Yes, but not with the suggested contribution. At the SQL > prompt question: start

  But, as said, don't bother unless re-installed.

• How to change the browser home page in Windows 8?

  I bought a Toshiba Satellite with Windows 8. I went into Control Panel and set msn.com as your home page.
  However, when I go on the internet I am taken to http://t.toshiba13.us.msn.com/ instead.

  How can I change this? I want to go to msn.com, no not a version of msn Toshiba.
  Carroll

  Hello

  It works fine for me. I put it http://msn.com and clicked on apply.

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• Unable to connect to the wireless network WPA2 in Windows 7 with Dell E6400

  Hello

  I've spent almost a week to find the following problem with one of my laptops:
  Laptop Dell Latitude E6400
  CPU Intel Core 2 Duo T9400 2.53 GHz
  Memory 4 GB
  OS Windows 7 SP1 32 bit Home Premium
  Card WiFi Dell Wireless 1397 WLAN Mini Card
  Intel 82567LM Gigabit Network Connection Ethernet card

  With the wireless configuration (Ethernet is unplugged), my E6400 sees the Motorola SBG 6580 wifi router using WPA2, but when I try to connect to this router (with WPA2 password) I got the error message:
  Windows could not connect to myrouter.

  I've updated all the drivers with the latest version and I still have the same error message.

  I have another laptop Dell E4300 under Windows 7 SP1 32 bit Home Premium and I can connect to the Motorola router without problems.

  Do you have ideas of how to solve this problem?

  Thank you

  I had this problem with my new Dell 1545 & wireless 1397 card, but it was some time ago. The utility Dell WiFi was, it turned out, interfere with the management of the windows of the WiFi card. There was also a problem of compatibility with versions of driver and I had to keep the driver to the version Windows offered two years ago. You can read about it at low signal wireless Dell Inspiron 1564 laptop 1397 WLAN Mini card , but do not forget that it was some time ago, it's with another model of Dell & that no router was involved.

  You can also try asking Dell support, but I never had any help from them at all, despite the request.

• Unable to connect to the internet using Google or Windows Live Mail access

  I have an Acer laptop with Windows 7.  Every time I have to connect to the Internet via Google, or attempt to access my emails on Windows live mail, it takes forever to connect to the time and the high bar always notes that Windows does not.  Please notify.  This happens only in the last year, no problems prior to this.

  What type of connection Internet?

  What Antivirus utility do you use?

  This happens in other web browsers?

  If you are on a wireless connection, try switching to a wired connection and try the download.

  Click Start, type: cmd

  Right-click on cmd, and then click Run as administrator

  At the command prompt, type the following:

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Click Start, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to access these web services again.

• Unable to connect to the driver download Page

  Hello

  When I click on the download button on the HP site, the connection times out.  I get an error message that Internet Explorer (v.8) cannot display this page (words to that effect).

  Using Windows 7 (32 bit), I try to download the full version of the printer drivers for a 2610 HP Photosmart and Officejet all-in-One, for Windows 7 32 bit.  The version of the driver is 13.1.0 (AIO_CDB_Net_Full_Win_WW_130_141.exe), Mo 362,68.

  Things, I tried to solve the problem:

  1 off User Account Control

  2 Turned off Windows Firewall (supplied with Windows).  No other firewall in use.

  3 pop-up Blocker disabled

  4. I tried to download from another computer running Vista (same result)

  I have the same situation of time-out after trying the steps above.

  I downloaded the Microsoft Windows updates, drivers and programs from other sites without any problems.  This issue of timeout occurred only when I try to download the above printer driver.

  Someone has an idea how I can get the download to work?

  Maybe I can buy a HP CD with drivers.  I'm willing to pay.

  Fred

  If the ftp link does not work, try the http: version by clicking here.  Some firewall or browser settings can block access to ftp sites.  In the case of the HP websites, this can be fixed by replacing the ftp: / / with http:// in the link, like did it for the link above.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• Satellite M100-221: unable to connect to the home WiFi AP

  Unable to connect to the home WiFi AP. Impossible to establish connection (when using intel software Bundle, connection hangs on the authentication step.
  When using the connection and windows engine, it connects 3 times will come down on "acquiring network address").

  I downloaded and installed the latest drivers and updates to the BIOS, but it does not solve the problem. Other computers with equivalent settings to connect without any problems.
  Wireless AP DLINK 1000AP + type b Wi - Fi.

  What is the problem?

  Hello

  When I have this kind of problems, sometimes by turning and the AP help.
  Or try to change the authentication or encryption settings.

  Good bye

• Since I have been to connect on Facebook, but it cannot open the Facebook home page.

  Dear Sir or Madam:

  Given that I was connect on Facebook, but it cannot open the Facebook home page, home page is empty, and he showed a massage on th botum of screen says "done, but with errors on page", I need help to teach me how to fix it. I am using Windows XP SP3, IE 8.

  Thanks for your time and your attention. I Muta hear you as soon as possible.

  Best regards

  Henry

  Henry, have you tried clearing your browser cache and cookies? Also, try a different browser (Tip: Chrome).

• Unable to connect to the Administration of Linksys to my WRT54G v.6 page

  Hello

  Recently, I moved into a new House and brought my old router with me.  I set up this router to my former place long ago, but when I hooked it up here, I am unable to connect to the Admin of Linksys page (http://192.168.1.1 for example).  I think that I changed the router what IP to 192.168.1.101... it was a long time ago so I don't remember exactly.  I tried find what it was by typing "ipconfig" in the command prompt and using the address "Default gateway" IP address as the address of router, but that has not worked.

  I tried to reset the router to factory default settings by pressing the button of reset for 30 seconds, then connect to http://192.168.1.1 but it does not help.  When I release the reset button, just power light continues to blink rapidly until I unplug the router.

  I can access the internet without any problem, but I noticed that I connect my router differently than the instructions provided here.  I connect an ethernet cable from my modem to 1 of the 4 ports on the router (just like my laptop) rather than the port of 'internet' on the back.  Don't know if that is related or not, or even what is the cause.

  I use Windows Vista on my laptop if it makes a difference.

  Thanks in advance for your help,

  Ryan

  The modem must be connected to the internet port of the router and the conputer on one of the 4 ports on the router... Now, check if you are able to ping the default gateway of the router. If you get 4 answers then, make broser on the computer settings... Open an IE, click Tools > Internet Options, then click on delete and delete all the files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

  Now, try to open the linksys configuration page by typing 192.168.1.1 in the address bar. You can also try another computer.

• Unable to connect to the download page

  I want to download adobe CS6 on a mac and when I sign in the download page by following the instructions to download safari says "unable to connect to www.adobe.com' can help you please?"

  Thank you!
  Victoria

  Hi Jeff

  Please come back to me - I've sorted in the end - something to do with the proxy on the mac settings.

  Concerning

  Victoria

  > Wright A Jeff [email protected]> 15/05/2012 17:43 >

  Re: Unable to connect in the download page, created by Jeff A Wright ( http://forums.adobe.com/people/JeffhasWright) for download, installation, commissioning - discovers the full discussion ( http://forums.adobe.com/message/4409333#4409333 )

  Having same trouble if you use a different web browser?

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4409333#4409333

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4409333#4409333. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion for download, installation, commissioning by email (mailto:discussions-community-download_install_setup@mail.forums.adobe.com ) or the Adobe Forums ( http://forums.adobe.com/choose-container! input.jspa? contentType = 1 & containerType = 14 & contain er 4671 = )

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

  Click here ( https://www.mailcontrol.com/sr/VH5dnhuJ0yrTndxI! oX7UnVkeCoQDDL2HjUlVITDxQRZrEYhSecAlntfJopcq60Adtp7c4fPHQE4zD1Sgchg ==) to report this email as spam.