Windows XP has online a glossary or a dictionary?

WINDOWS XP HAS A LEXICON OR DICTIONARY = FOR WE CAN UNDERSTAND ALL THESE ABBREVIATIONS AND KNOW WHAT THEY MEAN?

Thank you

RFRANCO

Hello

There is no dictionary tool in XP. However, you can use the search engine favorite you and search for the tool dictionary download and install it on his computer.

Note: Microsoft is not responsible for any problems caused after you install 3rd party programs.

It may be useful

Tags: Windows

Similar Questions

Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen

Have had problems since 31/12/09. Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening. System Restore has used several times, all software removed and replaced. New Quickbooks reinstalled two times 10, it usually starts up quickly. I was told not to turn it off, just let it run. It automatically goes into sleep mode, it still does not start correctly. Last message is that Windows has recovered from an unexpected shutdown; Windows can check online for a solution to the problem. Problem event name: bluescreen

Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen.

Hi slopchop

In the last few days have installed new programs? Or Anti Virus?

Try the steps in this link and check:

http://support.Microsoft.com/kb/958233

http://support.Microsoft.com/kb/925810

Also refer to:

http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/0a28ca4a-82a2-465D-92ef-b471ae86c887

http://social.technet.Microsoft.com/forums/en/itprovistaapps/thread/2e6991f4-7489-4D6F-A0B5-74de3d694d74

After back and let us know if it helped to solve your problem.

Thank you and best regards,

R uma - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Windows Update has disappeared from the BONE. __

I am using windows 7 32 bit.
Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
Seems that windows update has disappeared from the BONE.

Hello

Welcome to the Microsoft answers community site. I suggest you try these options:

Option 1: Make sure that Windows Update Service is running, or if a force start it takes

1. open run it and type services.msc, and then press ENTER.

2 locate the underside of services in all install services list.

Windows Update (a)

(b) BITS (Background Intelligent Transfer Service)

(c) cryptographic Services

3. check that the status is started. If the condition column is blank, right-click on the service and select start.

4. always make sure that the Startup Type is set to automatic, and then restart the computer.

Option 2: How to reset the Windows Update components?

Run the Microsoft Fixit tool to reset Windows Component Update.

http://support.Microsoft.com/kb/971058

See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

Option 3: search for viruses and malware

(A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

Or use Microsoft Security Essentials - free

http://www.Microsoft.com/Security_Essentials/

(B) check for the shape of software malware malicious software removal tool

http://www.Microsoft.com/security/malwareremove/default.mspx

Or

Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

Let me know if it works. Good luck!

Hope this information is useful.

Thank you and best regards,

KKS Vijay

[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.

I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

We will cover all the possibilities.

1. download each of the tools for deletion below, save it to your desktop:

Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

2. close all open applications (that is, anything with an icon on the taskbar).

3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

IMPORTANT! => Activate the Windows Firewall immediately after the restart.

IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

5. Repeat step #4 for another removal tool.

Tips:

-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

-Online start the problem in Mode safe computer, if necessary, proceed as above.

-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows Update does not work / "host process for windows services has stopped in.

Windows Update will not work. I get "host process for windows services has stopped from" I tried loading Microsoft 'fix it' in versions beta online and downloadable, and it does not load... starts to load, then an error message pops up he hit an unexpected error and cannot load. What can I try next? He

Good soft to hear than the fixed!

When I try to open files Office or Internet Explorer I get error: "host process for Windows Services has stopped working.

Get the message below and impossible to open files microsoft office or internet explore:

"Host process for Windows Services has stopped working"
"A problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

original title: host process does not

How to fix the "host process for windows services stopped working and was closed" on Vista
http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/ I hope I could help

Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

Hello

My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

Help, please!

DESKTOP WINDOW MANAGER HAS STOPPED WORKING
Windows can check online for a solution to the problem

-> online and are looking for a solution (recommended)
-> close

APPCRASH
Application name: Dwm.exe
Application version: 6.0.6002.18005
Application timestamp: 49e02696
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Timestamp of Module error: 4cb74dd3
Exception code: 80000003
Exception offset: 0000000000045f00
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: 0fef
More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
Additional information 3: f196
Additional information 4: acf765d48a0657c8822f379a6b5f3b91

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

Sorry to tell you,

I already solved the problem.

Just to let you know, I buy the product, because

I used the free and they don't really work (IN MY OPINION).

Anyone has this PROBLEM (appcrash)

Go to start

Click on Control Panel

go to appearance and personalization

Click on appearance color of windows.

then click on settings in the appearance of progress.

under the gaze of point for the theme of basic or something like that.

Want more info on Dwm.exe?

Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

Windows xp has a safe list of senders for windows livemail

Windows xp has a safe list of senders for windows livemail?

Hello

Repost in windows live mail forums at the link below

http://windowslivehelp.com/product.aspx?ProductID=15

and here is the vista forums

Try the forums xp on the link below

http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

Answers by topic

Someone at - it smart enough to: «host process for Windows Services has stopped working...» » ?

I have spent a week on this problem, looking all over the internet and doubt that someone knows enough to solve this problem. I've been a software engineer for 30 years and never worked on an operating system such as buggy windows Vista (or windows)

I got TWO errors. They may be related.

= The first is with Windows Update

-If you know, I tried:

At ran windows BITS difficulty
ran sfc/scannow (it found and fixed some iexplorer 8 _)
has ran defrag and
has ran chkdsk
drivers replaced with the latest news from Toshiba
has run hardware diagnostics - no problem

I tried with and without firewalls and AV running.
I don't run AVG control and malware - no problem

Windows Update always fails.

Machine: Vista 32 Home Premium SP2 on a Toshiba Qosmio computer laptop X 305-Q705 4 Gig Duo P7350 Intel with nvidia

Otherwise, Windows works fine. Net access is fine using Mozilla. Even correctly downloaded files. BUT

I get this error: windows update does NOT. It gives an error "failed", whose code is:

0X80072EFE-2147012866 ERROR_INTERNET_CONNECTION_ABORTED

Also, sometimes strange, windows displays an error dialog box:

"Host process for Windows Services stopped working and was closed"

A check with AppCrashView (wer reports) gives these data:

Version = 1
EventType = APPCRASH
EventTime = 129402052692496014
ReportType = 2
Consent = 1
Response.Type = 4
SIG [0]. Name = name of the Application
SIG [0]. Value = svchost.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value = 6.0.6001.18000
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 47918b 89
GIS [3]. Name = name of the Module fault
GIS [3]. Value = ntdll.dll
GIS [4]. Name = Fault Module Version
GIS [4]. Value = 6.0.6002.18005
GIS [5]. Name = Fault Module Timestamp
GIS [5]. Value = 49e03821
GIS [6]. Name = Exception Code
GIS [6]. Value = c0000005
GIS [7]. Name = offset of the Exception
GIS [7]. Value = 0004714e
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.0.6002.2.2.0.768.3
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 1033
DynamicSig [22]. Name = additional Information 1
DynamicSig [22]. Value = 4a3d
DynamicSig [23]. Name = additional Information 2
DynamicSig [23]. Value = c79c8c21b0e4702d54b9aebf158b2ec4
DynamicSig [24]. Name = additional Information 3
DynamicSig [24]. Value = f371
DynamicSig [25]. Name = additional Information 4
DynamicSig [25]. Value = 3b5338b3aed6dc4728911b2d00a3b11f
UI[2]=C:\Windows\system32\svchost.exe
UI [3] = host process for Services Windows has stopped working
UI [4] = Windows can check online for a solution to the problem.
UI [5] = check online for a solution (recommended)
UI [6] = check for a solution later (recommended)
UI [7] = close
UI [8] = host process for Services Windows has stopped working and was closed
UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
UI [10] = & close
FriendlyEventName = Stopped Working
ConsentKey = APPCRASH
AppName = host process for Windows Services
AppPath=C:\Windows\system32\svchost.exe

AppCrashview also shows the fault as module: ntdll.dll and once urlmon.dll

The system event logs says:

Application failed application svchost.exe, version 6.0.6001.18000, time stamp 0x47918b89, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception 0xc0000005, offset error 0x0004714e, process 0x7cc id code, start on time 0x01cbbafdcd8a8edc.

= Error n ° 2

I can work in SafeMode with networking (I'm in it now) using Firefox WITHOUT blue screens.

Now, BOD (bluescreens) seems to be related to the use of the damndable IExplorer 8

the crashdump gives:

==================================================
Dump file: Mini012311 - 01.dmp
Crash time: 23/01/2011 08:02:10
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x000000d1
Parameter 1: 0x00000a54
Parameter 2: 0x00000002
Parameter 3: 0x00000000
Parameter 4: 0x8304c49a
Caused by the driver: iaStor.sys
Caused by the address: iaStor.sys + 4349 a
Description of the file: Intel Matrix Storage Manager driver - ia32
Product name: Intel Matrix Storage Manager driver
Company: Intel Corporation
File version: 8.5.0.1032
Processor: 32-bit
Computer name:
Full path: C:\Windows\Minidump\Mini012311-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 6002
Size of the dump file: 138 424
==================================================

The drivers loaded in the memory range were:

==================================================
File name: iaStor.sys
Stack address: iaStor.sys + 4349 a
Address: 0 x 83009000
Address: 0x830e2000
Size: 0x000d9000
Time stamp: 0x4883d53b
Time warp: 2008-07-20 19:15:55
Product name: Intel Matrix Storage Manager driver
Description of the file: Intel Matrix Storage Manager driver - ia32
File version: 8.5.0.1032
Company: Intel Corporation
Full path: C:\Windows\system32\drivers\iaStor.sys
==================================================

==================================================
File name: ndis.sys
Stack address: ndis.sys + ce3b5
Address: 0 x 83201000
Address: 0x8330c000
Size: 0x0010b000
Time stamp: 0x49e02080
Channel time: 2009-04-10 23:45:52
Product name: Microsoft® Windows® Operating System
File description: driver NDIS 6.0 wrapper
File version: 6.0.6002.18005 (lh_sp2rtm.090410 - 1830)
Company: Microsoft Corporation
Full path: C:\Windows\system32\drivers\ndis.sys
==================================================

==================================================
File name: ntkrnlpa.exe
Stack address: ntkrnlpa.exe + b40e0
Address: 0x82a3f000
Address: 0x82df8000
Size: 0x003b9000
Time stamp: 0x4c0e557c
Time string: 08/06/2010 09:36:44
Product name: Microsoft® Windows® Operating System
File description: NT kernel & system
File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
Company: Microsoft Corporation
Full path: C:\Windows\system32\ntkrnlpa.exe
==================================================

Hey Joe,

I see that you have updated your drivers.

Have you updated your chipset for this PC drivers?

Are you overclocking PC or running a RAID configuration?

I suggest to remove all external devices during the diagnostic process, except the keyboard, mouse and monitor.

If you think this error is with IE, you can try running it without Add - ons.

Alternatively, you can try to reset the Internet Explorer settings.

Here is some information on this process:

http://support.Microsoft.com/kb/923737

You can also check your profile for corruption:

http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Windows Installer has stopped working on Vista Ultimate 64 - bit SP2

Hello

My Windows Installer has stopped working all of a sudden (probably common last week). I get no error message at all. It simply doesn't get it. The programs can be installed and uninstalled by there own systems updated, but the changes are not reflected in "programs and features". When I ask Windows Installer to run under programs and features, I get the usual verification pop-ups, but once I click on the last approval, nothing happens.

I tried to install a new Windows Installer from the Microsoft Download site and each time, the program "check updates" and I get an error message that says "this update does not apply to your version," (to paraphrase). I tried to install Windows 6.0, v-2, x 64, but when it does not work I tried all (LOL) with the same result.

At first I thought that my computer can was struck by a malicious code, so I ran MSE, remove malicious software (FULL) Windows for January and Advanced System Care 3. All scans is come-up 100% clean!

I tried to restore my computer to a point 3 days does not. As Murphy's law would have, I disabled the restore before January 12 points.

Windows Update online might work. I get notifications for optional updates for MSE and AFAIK, they are applied.

Edit: One more important thing, the uninstall on Advanced System Care 3 feature does more either. It's almost like the hooks to the installer of Windows have been removed to that also.

Installation service seems to be very well and the value 'manual '.

Any thoughts on the subject? I can reload Windows from "day 1", but would rather not. Laughing out loud. I have my drive so. :-)

Thanks in advance for your help.

Intel DG-965WH
Intel Dual Core 2 Duo E6300
4 gig of RAM @ 800 MHz
Windows Vista Ultimate 64
NVIDIA 8500 GT (512 MB)

A BIG 'Thank you' to Marilyn!

-----------------------------------

Start, CMD (run as administrator), sfc/scannow worked!

Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. (C:\Windows\Logs\CBS\CBS.log)

Why doesn't Windows come with a BACK order book any more?

Thanks Marilyn! You get a GOLD STAR for today! :-)

Cryptotic service has stopped Message & host Windows process has collapsed

Original title: my friends computer needs help: he continues to have a Cryptotic Service stopped Message & host Windows process has collapsed Message

* There a moment difficult to connect to the Internet... it usually takes 30 minutes until he could get it

* It can also change the Internet settings...

* the computer can get unresponsive

Sounds like me that the OS is having a big Hicup for some reason any

Any advice would be great

Hello

Have your friend try the Safe Mode with network - repeatedly press F8 as it boots up.

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htm

Original version
http://OneCare.live.com/site/en-us/default.htm

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Error message "Windows Explorer has stopped working"

I have windows vista home edition, I get the error message "Windows Explorer has stopped working"

I have two options, either to find a solution online and restart the program or restart the program. in all cases I restart Explorer and again get the error message, and then restart, etc...

The following are the details of the problem. I tried to remove all CMD services and reboot, but it did not help

Signature of the problem:

Problem event name: APPCRASH

Application name: explorer.exe

Application version: 6.0.6002.18005

Application timestamp: 49e01da5

Fault Module name: 2287.tmp

Fault Module Version: 4.80.0.0

Timestamp of Module error: 4c8c71fb

Exception code: c0000005

Exception offset: 000a7d70

OS version: 6.0.6002.2.2.0.768.2

Locale ID: 1033

Additional information 1: fd00

More information 2: ea6f5fe8924aaa756324d57f87834160

Additional information 3: fd00

Additional information 4: ea6f5fe8924aaa756324d57f87834160

Read our privacy statement:

http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

Problem event name: APPCRASH

Application name: explorer.exe

Application version: 6.0.6002.18005

Fault Module name: 2287.tmp

Fault Module Version: 4.80.0.0

Hello

Start Search ShellExView [1] for the 2287.tmp file and disable the entry.

André

[1] http://www.nirsoft.net/utils/shexview.html

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Windows Media Center online media NOT WORKING Please HELP!

I like to use Windows Media Center online media, but it has stopped working. When I click on a video of MSNBC all this is idle as if his will load but the video never starts. In January I had to install a new anti-virus program. Could he be playing with my media center? Also would it be my wireless connection? I live in a dorm, and everyone here has said that the connection was slow. HELP Please!

Hi liis177,

Follow the instructions in the link below that may help you resolve the issue:

Windows Media Center stops responding when you open an online service in Windows Media Center on a Windows Vista-based computer
http://support.Microsoft.com/kb/954588

Check whether the problem is resolved.

This problem may occur if Windows Media Center update process (Mcupdate.exe) cannot access the data store, or if it is damaged. Try to rebuild the Media Center data store that could help you solve the issue. To do this, follow these steps:

1. Click Start, type run in the start search box, then click on run in the list programs.
If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
4 rename the file in mediacenterdatastore.old
5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
6 start Windows Media Center.
Check whether the problem is resolved.

If this does not work, try to update the latest service pack that might help you resolve the issue.

Please post back and let us know if it helped to solve your problem.

Kind regards
KarthiK TP

"Windows PowerShell has stopped working" error message popping up constantly

I get the error "Windows PowerShell has stopped working" message popping up constantly (several times per minute). This started after I restarted my laptop with nothing else running but the standard startup programs. How do I get this resolved?

The detail section of the problem shows the following:

Signature of the problem:
Problem event name: BEX
Application name: powershell.exe
Application version: 6.2.9200.16398
Application timestamp: 50338287
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 031cebc0
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt

Hi Kumar,

Thanks for your reply. It was caused by Poweliks.

What I did: reset the IE security (version 11) by default; Download the updated version of free version of Malwarebyte s in SafeMode with network connection; restored the system to the point before that he has been infected with the Poweliks (I got lucky that point to restore was not removed by the system yet); then re scan the entire PC in mode safe mode with networking. So far, nearly a week, the PC works fine and the Poweliks wish never to return.

Thanks for all members of the community to help.

Happy new year to all!

-Kevin

Even with safe mode Windows 7 error "Windows Explorer has stopped working". Screen is blank with only the specified cursor.

Using Win 7 Home 64 bit:
After the connection, I get "Windows Explorer has stopped working" its InPageError says in details
Auto check solution online does not come to the top with a solution
the screen is black nothing happens.

I opened in safe mode, same problem.

the only thing I can do is ctrl/alt/del and open Task Manager. When I tried to open the new task... Task Manager stopped working

Request of guid, how to solve this problem. The problem started last night.

The laptop is Lenovo G550
Operating system: Win 7 64-bit service pack 1 - home edition

I can email a screenshot is necessary for the InPageError
Error state code: c0000185
Type of media loopholes: 00000003
OS Version:6.1.7601.2.1.0.768.3
Locale ID: 1033
More information 1:c785
More information 2:c785ae48d9bd3e84e80fe64557c132ac
Information additional 03:58 d 5
More information 4:58d5c6fbf156506f476a5bd1fc86cfbf

Hello

This problem may be due to one of the following problems:
- You are using an outdated or corrupted video driver
- System files on your PC can be damaged or do not correspond with other files
- You may have an infection of viruses or malware on your PC
- Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working
Try the following steps:

Method 1:

Try the steps of error: Windows Explorer has stopped working

Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

Note:

Ignore them perform a upgrade in Place the link above.

Also ignore the safe mode and clean boot.

Method 2:

We will try to start the computer in mode low resolution and check the status of the issue.

Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh. You can use this mode to reset your display settings.

Refer to the section:

Turn on the video resolution (640 × 480)

You can also check: why is my screen black when I start Windows 7?

Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

Backup and restore

http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

It will be useful.

Windows XP has online a glossary or a dictionary?

Similar Questions

Maybe you are looking for