Unable to connect to the internet, can't update firmware

Similar Questions

• Unable to connect to the internet after installing updates

  Original title: I can't access the internet after running the latest updates! Please notify.

  I can't access the internet after you run the last update! Please notify.

  Hello

  1. What is the error message that is disayed when connecting to internet?
  2. what type of internet connection do you use?
  3. Please post the KB number that was finally installed update.
  Please follow the links below to elp solve the problem.
  Method 1
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2
  Start the computer in start mode minimum avod conflicts with third aprty software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: When you have done all the troubleshooting steps, follow step 7 of the article mentioned above to start the computer in normal mode.
  You can run this tool and display the results.
  
  Internet Connectivity evaluation tool
  
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
   
  Method 3
   
  Step 1
   
  Start in safe mode with Networking if you have awired connection and troubleshoot completed the question.
   

  Description of the safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Step 2

  a. turn off your antivirus software and firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  b. disable your firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

• Unable to connect to the internet to check updates

  According to Oracle® Fusion Middleware for Oracle WebCenter 11 g Release 1 (11.1.1) Developer Guide, I download the update of jdeveloper. However, jdeveloper will display error:
  Unable to connect to internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your proxy setting s below and click OK to try again.
  
  Host name: emeacache.uk.oracle.com
  Port number: 80
  Exception: localhost | 192.168.1.16
  
  I don't use a proxy and I close the firewall. I can get the updates before, but not today.
  
  I have an old version of Jdeveloper 11 g. He can get the updates of Oracel, but I can't find the webcenter extension in the list of results.
  
  How would I know if the webcenter extension has been downloaded and installed in Jdeveloper 11 g.
  
  When I opened the file jspx webcenter application, all the graphic components become rectangle.

  You can get the extension here WebCenter:
  http://www.Oracle.com/technology/products/jdev/101/update/fmw_products.XML
  Once install you it, you can register for this the tools-> preferences-> extensions
  You will also have a new application model for WebCenter available.

• Satellite Pro L510 - unable to connect to the Internet

  Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

  What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

  Hello

  > now unable to connect to the internet
  Can you write more than one sentence about your problem?

  Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

  Sorry, but without this information there s no end of discussion

• Unable to connect to the Internet / camera Manager.says I am missing drivers

  My computer crashed with virus; I wipe the hard drive around and installed Windows xp home edition. My computer is fine, but I can't get on the internet. The Device Manager has marked these places with problems (see list below) (problem is no driver installed) I'm just figuring that this is where my problem lies (unable to connect to the Internet) can you tell me please what to do to connect to the Internet and where the problem can be

  Device Manager

  Other devices

  Ethernet controller

  Network controller

  Unknown device

  Video controller

  Video controller (vga compatible)

  Go to the manufacturer's site (for whatever the brand / model of your computer is)

  Find the template, then download and install the drivers for those

• My Wifi is on but IE tot impossible to connect to the Internet can someone tell me what is the problem?

  My WiFi is on, but when I try to go to the internet it says unable to connect to the internet can someone tell me what I need to do?

  I'll try tomorrow when I find work. Thank U!

• Can connect to the server (although very slowly) but unable to connect to the internet

  Original title: network connectivity

  I have a user who has been connected to the internet through our SBS server.  All of a sudden, it can connect to the server (although very slowly) but unable to connect to the internet.  The network and sharing shows that it is connected to a public network not by the domain server.

  I hooked another computer for network wiring and it worked fine.  I changed the wiring, and it still doesn't work.

  Any ideas?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Setup is unable to connect to the Internet

  When I try to download and install programs on my desktop, I get an error message indicating that Setup is unable to connect to the internet. How to fix this?

  Hi NardoBailey,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the full error message that you receive?

  4. you receive the error message when you install any program on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Unable to connect to the Internet or Email

  For some reason, I am unable to connect to the internet or e-mail using a wired connection. Earlier today, I was installing a wireless printer and I got it in collaboration with the wireless network. But now I switched to the cable network and I can not connect. However, the connection to the LAN network is showing that I am connected. To post this message, I had to go back to the wireless network.  I guess I have inadvertently changed a setting somewhere. I know that my firewall is not blocking the connection, because I disabled it previously but the LAN would not even connect. Any ideas?

  Thank you

  Tony

  Well, I found the problem. It's working now. The problem was that the TCP properties have been changed somehow. There was a specific IP address instead to get the IP address automatically is checked.

  Tony

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

• Missing error driver unable to connect to the Internet

  Original title: I deleted a driver

  I deleted a driver for my Wi - Fi accidentally when I was manually cleaning the hard drive. When I try to connect to the internet the computer says missing a driver. any suggestions or guidance on how to reinstall?

  Hello

  What is the brand and model of the computer?

  Method 1:

  If you are unable to connect to the Internet via the wireless connection, you can switch to a wired connection to download the driver or to download the driver on another computer.

  Driver can also installed from driver disk provided by the manufacturer of the computer.

  Method 2:

  You can also perform a system restore to the date when the computer was working fine and check.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Important: Restore the system affect the system files of Windows, programs and settings of register that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  Method 3:

  I suggest you visit the manufacturer's Web site and download and install the latest wireless drivers or if you use the link give and check if it helps.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Hope this helps and keep us posted.

• HP ENVY laptop model m7-j020 d: unable to connect to the Internet

  I have a HP ENVY 8.1 Windows running.  No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).

  Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.

  E-mail started acting erractically. I tried to restart the computer, and then he started to install updates.  Not sure if she did because it does not connect to the internet.

  Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.

  Restart the PC without installation updates has not improved the situation.

  Any help would be greatly appreciated.

  flynkites

  Hello @flynkites,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!

  Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.

  If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  I hope this helps!

  Concerning