"Unable to connect to the MKS: unable to connect to the host [servernamehere] failed on vSphere 4.0 and client.

Similar Questions

• After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

  After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

  You actually have a renewal LR5 problem or ask yourself what you need to do?

  Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

  Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.

• The costs of Certification VMware VSphere 5.0 and Date

  Hi all

  I'm here to ask questions about Vmware Vphere Certification costs and the review Date.  I want to get a certification. Guide me on the whole procedure.

  Help in this matter will be appreciated.

  Concerning

  Hassan

  Welcome to the community,

  You can find the requirements and links to the courses required for VMware Certified Professional (VCP)

  As you can see on the page, the VCP certification requires not only an examination but requires also an internship. For the cost and dates, please follow the links in the box "Courswork. necessary

  André

• How to pass the host vcenter is installed on?

  We just bought a new server that came with ESXi 5.0. We want to upgrade to 5.1 before adding virtual machines. We have only a handful of VMware servers, so this is the first time that we used vcenter. We licensed Essentials and installed vcenter VM and installed Manager upgrade on a server that is separate from Windows.

  When I try to upgrade from the host, it fails. I guess it's because I'm trying to get the same host I'm trying to get to level?

  I think that you do not use shared storage as you could just vmotion vcenter

  and with your lic does storage vmotion

  you have to pass the vcenter to another host.

  You can move VMs from the vcenter through a move/copy to another host via a data store browser

  or

  connection to the host, vcenter for export to the FVO, turn off vcenter. Connect to host2, import ovf containing vcenter.

  still a pain...

  or you could do manual updates on the host.

  Anyway its not too easy to do...

• How to get the host ESX DR see replicated Celerra Lun

  Hi guys, Im setting up SRM with 2 x NS20 and ive got regarding the configuration of the LUN on the production storage array, Lun on the storage LUN appropriate to prod/dr esx servers present DR Bay. Ive set up replication and added the DR lun to the esx server, ensuring not to add it as he will write a signature. I've then added the production on the production ESX Server LUNs, added storage which obviously writes a signature on the drive, and with the installation of the replication, I expected to simply issue a new analysis on the DR esx host and do see the data store.

  Am I missing something here? Any help would be appreciated.

  Thank you

  Hello

  "On DR NS ive done exactly the same thing with respect to FS, Lun, target iSCSI and presented to the host ESX DR, ive done a rescan and his picked up the lun 'Read Only', which is being replicated in but the tab of summary in VC, I see that the local VMFS file system and I was expecting to see the replicated LUN listed with the store local data or is this seen only". When SRM changes the properties of Lun during a failover? »

  You will not see the Site recovery volumes listed in data warehouses, unless you do one of two things - a failover in which case the production side will be unalterable and be removed from the list of data on the Production side store while exposing the VMFS data store now read-write on the side of the recovery.

  Or you use the test function in which case that encourage a wink of Celerra temporary writable and it will appear as a data store broken in the list on the side of the recovery VMFS data warehouses.

  However, it seems that you do not see this result, as DR table does not seem to be configured as it should.

  Can the side Production VC communicate with happiness with the Celerra recovery site - IE can launch you a session PUTTY from the Production side VC and connect to recovery side Celerra. Can the recovery side VC do the same thing for the Production side Celerra?

  I guess you get the unknown peer after that MRS. not the discovery of the table that owns about 23% forever and then ends. The only other thing I can think of and am not sure about this as a solution because it is a set of actions that I did of my side of recovery when Celerra is to create a small file system and in a small iSCSI LUN on the side of the recovery of the recovery side Celerra and put it in your recovery ESX cluster side - create a file system VMFS on it and place a Virtual computer in this VMFS file system - this is to check that there are no problems with the ESX host side recovery working with the recovery side Celerra

  My guess would be a thing of IP connectivity - if it's a little strange, if the link between the Production side VC and the recovery side VC has been established successfully

  I'll pass on to a colleague to VMware SRM and see if he has any ideas

  Concerning

  Alex Tanner

• Write problems block the memory of the host

  Hi all

  I work with a sbRIO 9639 and followed what I thought to be the recommended procedure to write in the block of memory to the host computer via (see diagram attached host and FPGA implementation). However the operation of the aforementioned code does not actually change the memory and what is available is rather just the previous values (which are persistent).

  However, I am able to write to block the memory directly from the vi FPGA (one) and get the results that I would wait if I then run the host after writing the correct values. In fact, I can now see these values from the host using the read/write Protocol.

  Does anyone have an idea on the cause of this problem? I followed the implementation to write and read from the memory in the examples, but have not found any success.

  I can't possibly comment code NIs because I don't know who wrote, why and for what purpose.

  You can write to the control whenever you want, but if you don't actually read it yet (mark) then you're never going to see the new values.

  Polling station should be avoided on the host programs, but it is not inevitable and normal on FPGA.

  Put the entire program within another loop, and then try again.

• Don't see the hosts file, I'm trying to block the ads of my browsers

  Hello

  I'm trying to block ads in my browser but when I go to c; Windows/system32/drivers/etc I do not see the Host file I virtue see a file while properties indicates that it is 5 archives. I need to add some info on the hosts file how to make this file show. Although I don't see it when I try to paste a modified hosts file it won't allow replacement of Martin

  I use XP.

  Thank you

  Catalin

  Click Start--> go in run and paste the following entry: %systemroot%\system32\drivers\etc

  You now see the hosts file?
  If this is not the case, try this:
  1. click on start go to run-->
  2. tap------(literally just a------and nothing else)
  3. press on enter
  4. click on Tools--> folder--> view options
  5. make sure that a small black dot appears next to 'display files and folders '.
  6. scroll down for 'show hidden files and folders' and remove the checkbox from "Hide protected files (recommended) operating system.
  7. click on 'yes '.
  8. click on 'Ok '.
  9. click on start--> go in run and paste the following entry: %systemroot%\system32\drivers\etc
  If you * see the hosts file now, right-click on it and make sure that there is no check mark 'read only' and 'hidden' boxes... If they are verified, then remove the check.
  Note: you should not have to perform steps 1 through 8 to view the hosts file; the hosts file is visible even with these settings, the default value (for example, when files are hidden you should always see the hosts file), but you may have a spyware infection that has tried the hide and prevent changes in the host file (to prevent you from making corrections in the file which made spyware)
  assuming that you have made any customizations to this file, it should appear as the default value listed in this Microsoft article: http://support.microsoft.com/kb/972034
  If it looks not to the default file listed at this URL, then you can recreate the file by using the templates included in this document KB

• email problem - "mail from the host cannot be found.

  Problem title: original email.

  Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.

  The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.

   

  Gary van, Microsoft MVP (Mail)

  ------------------------------------------------------

   

  "Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *

   

  My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.

   

  The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.

  Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.

   

  Gary van, Microsoft MVP (Mail)

• The host agent GBA support

  What version of ACS that supported for the host agent (for example IP phone, printer, etc.)?

  I have GBA v3.1, it is supported?

  Is there a solution to authenticate devices by MAC address?

  Thank you

  AW

  Configuring the host agent is supported in 4.2 and ACS version 4.0,4.1. Many guests who authenticates the ACS are running the agent software that requests access to network resources and receives approval from the ACS. However, some hosts are not the agent software running. ACS solves this problem by using the MAC address of the host device to identify and authenticate the host. This technique is called the authentication MAC (MAB) workaround.

• Update comments before the host tools

  Hello

  Our backup software (TSM for EV) checks if the VMWare Guest tools are 'in progress', before you perform the backup of the application.

  This means that when we improve a host for the new version, the backup of the application of all the virtual machines on the host will fail, until the tools are upgraded.

  
  

  However, the cheque will go through if the comment tools version is newer than the version of the host.

  Then...

  Is it possible to orchestrate the tools update to a newer version than the tools on the host?

  (In addition to using a single host 'host jump' update for updates, and migration of virtual machines on that host one).

  Best regards

  Martin

  
  

  
  

  Is it possible to orchestrate the tools update to a newer version than the tools on the host?

  Yes, it's possible and fully supported to run versions of VMware Tools in the guests who are more recent than the ESXi host versions. For example, you can use the latest tools of U1 6.0 even on the hosts 5.x. see: product VMware interoperability matrices

  To obtain and deploy the latest tools, you have a couple of different options available; you don't need to bother with a "host of jump' or whatever it is.

  1. just update the package tools-light of your guests, for example with MUV. This beautiful thing is this can be done online and requires no maintenance mode or a reboot of the host. Make sure that no virtual machine currently has VMware Tools mounted ISOs.

  2 extract the ISOs tools the bundle version (patch) of target offline or installing ESXi ISO.

  3 download https://packages.vmware.com/tools/esx/index.htmlTools packages. These correspond exactly to those of the packages included in the packages offline (patch) or installation ISOs. (Just get the .exe files big, no need to enter an ISO.)

  4 download the new standalone version 10.x of the tools of:

  https://my.VMware.com/group/VMware/details?downloadGroup=VMTOOLS1005&ProductID=491

  http://pubs.VMware.com/Release_Notes/en/VMwareTools/1005/VMware-tools-1005-release-notes.html

  Personally, I prefer not to bother with the ISOs editing or updating through the vSphere Client interfaces, but using an automated custom installation with the package of relevant tools like this:

  C:\VMware-tools-9.4.12-2627939-x86_64.exe/v number! REINSTALLMODE = vomus ADDLOCAL = DELETE all the Audio, BootCamp, FileIntrospection, Hgfs, NetworkIntrospection, Unity REBOOT = ReallySuppress

  This also some unnecessary components like unity, which are available on the position of work/Fusion/player, and eliminates a forced reboot.

• Clean up the host fails

  Recently updated to 5.5 Update 2. Manager Update to upgrade now, when you try to patch the hosts it fails with the error:

  "VMware vsphere Update Manager there was an unknown error. Check the logs for details and events. »

  This happens more or less immediately after clicking on restore. I don't seem to be able to find any newspaper linked to it, or there at - it something useful in the events tab.

  Any ideas?

  Fixed it by cleaning installation of Update Manager, you re-create the database with a new and then reinstalling.

  Everything works now, think that the DB got a bit corrupted or something happened to what it worked fine on the first host.

• How do I know if the host is in standby mode

  Can anyone tell how to find hosts in standby mode? I use java sdk

  HostSystem.runtime.standbyMode

  http://pubs.VMware.com/vSphere-51/index.jsp?topic=%2Fcom.VMware.wssdk.apiref.doc%2Fvim.HostSystem.StandbyMode.html

  Enum constant

  NAME	DESCRIPTION
  Enter	The host is sleep mode.
  output	Host wakes.
  in	The host is in standby mode.
  None	The host is not in sleep mode. And is not being input/output in standby mode.

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.