Unable to connect to the network - Windows 7 on Windows Server 2003
original title: Six Windows 7 computers running on a network (Server Windows 2003 R2 Standard Ed) would not connect to the network in the morning, startup repair is unable to repair
We have 10 PC running Windows 7 on a network (Server Windows 2003 R2 Standard Ed) and 6 of them started up the Start Up Repair screen the same morning. Run startup repair but then received the message "Startup Repair cannot repair.
Windows could not start. A recent change in hardware or software may be the cause. Startup Repair cannot repair.
Details of the problem: event name offline Startup Repair
Signature 01 6.1.76.00.16385
02 6.1.76.00.16385
unknown 03
04 21200896
AutoFailover 05
2 06
07 0x6b
OS version 6.17600.2.0.0.256.1
Locale 1033 ID
In the details to diagnose & repair was the only entry that indicates a problem
First cause is parameters 6 unknown error checking b 0 x 0, 0x0, 0x0, 0x0
In all cases the system restore worked but had to come back a week, him the day before restore point would not work. In one case, the problem is that system restore and the next day does not, eventually reinstall.
Clues or tips as to what has caused this?
Kind regards
GinSeek
http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/
Above links are for server communities.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Hello
When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.
Hello
It would be a good idea to run the System File Checker tool to see if you have corrupted files
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
___________________________________________________
And Malware scan:
Search for malware, if necessary using the safe mode with networking.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
-
No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network
Hello
Know what type of network card you have and download the drivers of its supplier.
It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Unable to connect to the network "\\localmachine\sharedname" share
I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine.
At the start of the converter, I have "connecting to a local server.
Specification of the source system is OK, even if I don't know the certificate error. The conversion wizard installs his agent and it connects OK.
To the Destination System, I said:
Type of destination: VMware Workstation or other virtual machines to VMware
Product VMware: VMware Workstation 8.0.x
Information on the virtual machine:
Name: same as the source system, such as detected by the converter
Location for the virtual machine: \\localmachine\sharedfoldername
Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder."When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share
So far the measures of investigation:
-Connection to the share through Windows Explorer works fine; It is possible to write to the share-J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist." It was a bit of a long shot, I guess, but the form does not work in Windows Explorer.
-Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum
The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'. I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.» "Please specify a UNC path such as: \\machine\sharename.
Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running." However, the next button is always disabled until credentials are provided.
Can anyone help please?
You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)?
-
Satellite L40: Windows Vista unable to connect to the network
My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.Any advice would be appreciated.
Select this option.
Hello
Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.
Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...
Welcome them
-
I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.Hello:
The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.
The 2nd driver on the list is W10 x 64.
https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10
-
XT720: Unable to connect to the network for upgrades
Hello
I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"
How can this problem be solved?
How to get the system through files zip for Android updates?
Kindly let me know.
It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.
Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)
-
The main computer in my house is connected to the web via a modem to our ISP (Cox). We use a Cisco's Linksys wireless router. We have configured a new laptop to connect through the router yesterday. Now my laptop, which had been the connection very well, can't access the network. When I go in the "network and sharing Center" and pull up nearby wireless networks, our network shows is even more bars, just a red X. Reads the error message "unable to connect to this network because the settings of that computer to match the parameters required network.»
I don't know what has changed on our network, but I was unable to understand what these "required parameters" are, so I was unable to change the settings of my laptop to match the requirements. Pls help.
Hi Sharpdale,
Step 1
I first suggest you to perform network troubleshooting in Windows 7 and check if it finds problems, and if he is able to fix it.
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Step 2
Use Windows to configure wireless settings and check if it helps to solve the problem.
a. click on Start menu and select run
b. type ncpa.cpl, and then click OK to open the menu of the network connections.
c. Select your Wi - Fi connection service and choose the option change settings of this connection.
d. go to the wireless tab and select (tick) labeled use Windows to configure my wireless network
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Dynadock U3.0 - unable to connect to the network
I have a U3.0 Dynadock and when you try to connect to the network at work via a network cable, the parameters were not detected automatically.
I then put manual details (IP), but this did not fix the problem.I assigned by DHCP the Dynadock should get a certain IP address.
I still have a problem.In addition, when left on DHCP, subnet mask is 255.255.0.0 which is weird.
Has anyone else had trouble linking their Dynadock to their network?
I use a laptop another progress, running Windows 7, 64 bit.
I found a solution.
update to the latest version of the software available at toshiba for the dynadock solves this problem.
software provided with the hardware is V6.1
to solve the problem, it is necessary to download the toshiba support website V6.2.
Also note, that windows 7 doesn't automatically recognize that this software update is available.
-
Unable to connect to the network and network adapter is not detected
Hello, this is the first time I use a laptop ( HP Pavilion 2332se g6 ) and I installed Windows 7 Ultimate 64 bit. I cannot connect to the network (wired or wireless) and cannot connect to Wi - Fi.
My problem is perhaps the same problem in this post in your forum, so I provide the same information. If it's not the same problem, ask the details you need.
What I see in device (with hardware ID) Manager:
- Other features:
Bluetooth controller:
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11
Ethernet controller:
PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_O5
PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
Network controller:
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3290 & CC_028000
PCI\VEN_1814 & DEV_3290 & CC_0280
PCI device:
PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00
PCI Simple Communication controller:
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C
PCI\VEN_8086 & DEV_1E3A & CC_078000
PCI\VEN_8086 & DEV_1E3A & CC_0780
SM Bus controller:
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C
PCI\VEN_8086 & DEV_1E22 & CC_0C0500
PCI\VEN_8086 & DEV_1E22 & CC_0C05
(USB) Universal Serial Bus controller:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03
Unknown device:
ACPI\HPQ0004
* HPQ0004
Hello:
First install the chipset driver and reboot (will install the SM Bus controller).
Second: Install the AMD graphics driver and restart.
For switchable graphics in your notebook, you install only the driver AMD, which installs the drivers for the AMD and Intel for the graphical configuration has your laptop. NEVER install the Intel driver only or allow updates to the Intel graphics driver to install.
Third: Install the audio driver and reboot.
Now, the rest of the devices can be installed...
Ethernet controller:
Network controller
Bluetooth controller
PCI device
PCI Simple Communication controller
(USB) Universal Serial Bus controller
Unknown device
-
error "unable to connect to the network hidden.
Hidden in my own home network
I have 2 laptops. I can connect to the network wirelessly fine with 1 laptop. But the 2nd laptop says cannot connect to the hidden network. HOW CAN I VIEW IT?
Hi WendellXD,
1. who is the operating system installed on the computer?
2. it worked earlier?
3. have you made changes to your computer recently?
4. What is the brand and model of your computer?
5. you try to connect to the network through wired or wireless?I suggest you follow the link and check if it helps. -
Unable to connect to the network, Inspiron 6400, Win XP Pro
Hello. I have a laptop Inspiron 6400 with Windows XP Pro and cannot connect to the local network and thus to internet. The problem appeared after I took the laptop with me on a trip. I don't know if I hit it too or maybe changed a setting that I should not have. The only relevant thing I can remember is that I tried to connect to a wireless network, but totally failed. So now I'm back home and cannot connect to my network (not wireless), even if the icon on the computer says that it is connected to the network and works fine, then the function 'fix' there was no help. Other computers connected to the same router doesn't have the same problem. The laptop is not reachable from the other computer, and vice versa.
Here is the ipconfig information:
Windows IP configuration:
The host name...: (who cares, right)
Suffix main DNS...:
Node... type: hybrid
Active... IP routing: Yes
Active... proxy WINS: No.Ethernet connection to the Local network card:
The connection-specific DNS suffix. :
Descrtiption...: Broadcom 440 x 10/100 Integrated Controller
Physical address: 00-1D-09-BE-2A-B5
DHCP active.... : No.
... The IP address: 192.168.0.1
... Subnet mask: 255.255.255.0.
... Default gateway:Ethernet wireless network connection card:
State media: Media disconnected
... Description: Dell Wireless 1390 WLAN minicards
Physical address: 00-1F-3A-11-2D-61So, I would be really happy if someone could tell me what is the problem...
-
Unable to connect to the network of 5 GHz N SL510
I have laptop Thinkpad SL510 and DD - WRT flashed router Netgear WNDR3300. The laptop can connect to the network when it runs at 2.4 GHz, but when I slide to 5 GHz N-network, the laptop does not see. Is it because SL510 does not support the 5 GHz or I have a problem with my setup? Laptop is running Win7 64 bit with all updates installed. I use Lenovo cordless tools to connect to find and connect to wireless networks.
Thank you.
This card does not support the 5 ghz of bandwidth.
-
Unable to connect to the network in an OS Win 7 comments when the cable disconnected
Hello
I have a Win7 x 64 host with Workstation 7.0 executes 2 guests - is also a Win 7 x 64 and the other is a Win 2003 R2 x 86. Both work quite well when I have a cable plugged into the host network, but when I unplug it, the Win 2003 comments always connects to the network local vm end (for example I can ping the host and I have a correct IP address with ipconfig) while the prompt of Win 7 says "unidentified network".
I have something special for the networking of comments (or even the host by the way) and that the guest Win2003 worked 'out of the box"that makes me think that the Win7 to work also with some small configuration changes somewhere - someone can help point me in the right direction?
See you soon
Dan
If both are NAT, both should have the Internet connection if you have removed the cable, because NAT virtual network connects to each host TCP/IP stack.
Are you sure? It really sounds like a bridge and the other is NAT. If you unplug the cable from the network status of the guests should not change. If in doubt, post the two guests .vmx files.
AWo
VCP 3 & 4
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
FTP connection times out on Windows Server 2003 when you run Windows Firewall
This seems to come up recently, perhaps with a recent Windows automatic update.
I have FTP server running on Windows Server 2003 R2.
The NIC has the firewall Windows is activated, which allows port 21 (FTP) through.
When you use an FTP client from a workstation, the FTP client expires when you navigate to a folder with many files, say the folder/images of a website with 10 + MB in total (which isn't really that much). Navigate to other folders with smaller files seems fine.
Now, when I turn off the firewall of the server, then I can use a FTP client on a workstation to access any FTP folder regardless of the number of files or the size of files and everything is fast fast.
This brings me to the conclusion that the problem lies in the Windows Server 2003 firewall, and we must have this option disabled for FTP clients do not expire.
Hi Scott a. Keen,.
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
Maybe you are looking for
-
Is it possible to upgrade the Satellite Pro M70 with a Core 2 Duo CPU?
I ve got the Toshiba Satellite Pro M70.It is with the Intel Centrino 1733 Mhz.I want to know if it is possible to update my system with a Core 2 duo.STI Centrino (Dothan) 479M CPU base and the core 2 duo is 479 Y. Thanks for your replies!Sebastian
-
HP Pavilion laptop 15-e036sx, need drivers for windows 7
Hello Buy HP Pavilion 15-e036sx Notebook PC with Win by default 8, downgraded to Win 7 but after downgrading network drivers (ethernet and wireless), usb, bluetooth readers, etc. display drivers drivers must all now. Please provide me the download li
-
Satellite L500 - hard disk drive partitioning
Hi all (first posting times) I came across a little curiosity. Bought new laptop everything installed, then loaded into all the previous laptop backup files, brilliant all work...But then noticed was running out of space on the hard disk (drive C)? W
-
I tried everything, except the possibility that the software is prohibiting printing
my printer hp j4550 quit printing range. It can always copy and scan. What could be the problem? Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error me
-
I installed Vista SP2 on my system (Vista ultimate 64-bit) and my son system (Vista 64-bit Edition home premium). Downloads have been fine and installed good after download. Then when we restarted the computers they were installing SP2 and on the spo