Unable to connect to the printer Canon MF4700 series, please help

Similar Questions

• HP series D110: update Apple OS Sierra this morning. Now unable to connect to the printer HP series D110 to scan.

  Apple OS update Sierra 10.12 and now unable to connect to the printer to scan. Version of the driver for HP printer is HP inkjet 1 pilot 3.3.2 can someone help me?

  @Lancer3

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer to scan does not work after the recent update of the Sierra,

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• "Unable to connect to the printer operation was not successful"

  I use the operating system Win Xp I have the WiFi network and I can't connect to any shared printer on my computer. She has a massage error like
  "Unable to connect to the printer operation was not successful"
  Can you please help me solve this problem

  Thank you
  Ramil

  Hi RamilAnuja,

  ·         This is the first time that you connect a wireless printer?

  Method 1: See if you follow the steps as suggested here.

  Microsoft Windows XP - to connect to a printer on a network

  Method 2: Check to see if this article helps you.

  How to set up a wireless network (WLAN) in your home

  See also:

  Microsoft Windows XP - overview of network configurations

  Printer in Windows problems

• HP Deskjet 3510: HP Deskjet 3510 - unable to connect to the printer

  I had this printer for some time but have never been able to properly print to this printer using this specific computer.   FYI, I'm trying to print wireless at it. This office has wireless compatibility.  I have the drivers and all (I think, I HP everything at the time but not the disk that came with it I lost only).  Don't know why it fails, he said only: "unable to connect to the printer.

  Thanks in advance for any help.

  Hi aunt Shirley.

  First of all, we're going to connect the printer to the network:

  -Restore default values of network within the menu on the front panel of the printer wireless.
  -From your computer, connect wirelessly to the network printer (it should be a name similar to HP - Setup - xx - Deskjet 3510).
  -After successfully connecting to the printer, open a web browser such as Internet Explorer or Chrome and type 192.168.223.1 in the address bar and press ENTER.
  -Click on the Wireless Setup Wizard
  -Select your router and enter the password to connect to the printer to the router.

  Run again the printer software to your computer to rediscover the printer on the network.

  See the support institution by clicking on the thumbs upwards in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• BB Simulator, get: "unable to connect to the selected Mobile Data Service, please try again later."

  I run MDS firstly, it seems well, window is open. But when I run the Simulator, in my case 8300. I get error when you try to access any web resource: unable to connect to the selected Mobile Data Service, please try again later.

  I've initially tried to do this on win7 and moved to xp, which solved my problem of MDS, but I still can't get networking funciton on the Simulator. All that I'm missing? Need to make

  Had, it works with the help of Michael on StackOverflow.

  On Win7.

  (1) uninstalled java and things bb.

  (2) fresh installed JDK 6 with the SDK

  (3) path added to jdk/bin to the path environment variable

  (4) downloaded Simulator runing 4.2 os No 4.5

  (5) installed MDS and Simulator in folder BlackBarry under C: /, runing administrator installation

  (6) powershell started as an administrator

  (7) sailed to MDS folder via powershell run.bat and executed

  8) sailed to BB Simulator via powershell folder and run 8300.bat (downloaded 8300 simulator)

• Unable to connect to the selected Mobile Data Service, please try again later.

  Dear all,

  I downloaded Blackberry email and MDS Services 4.1.4 and the Blackberry 9630 Simulator Simulator. I'm testing a blackberry asp.net application I have running on a test server using the blackberry Simulator.

  I have windows XP box. When I try to run the SDM Service, it runs without error, but acquire it on the site - http://www.blackberry.com/go/mobile - error saying above message - unable to connect to the selected Mobile Data Service, please try again later. How can I solve this problem, I tried to use full qualified names in the config file.

  Any ideas?

  NAV.

  Hi Nav, thanks for your message.

  When you use the BlackBerry 9630 Smartphone Simulator, you may need to change its default connection settings in order to provide network connectivity.  The reason why because the 9630, being a world phone, supports different types of network technologies and a configuration change may be needed to make it work with the MDS Simulator - CS.

  1. from the home screen, click the 'manage connections '.

  2. a popup window opens, select "Mobile Network Options '.

  3. in the options screen, ensure that the following field values are defined:

  • Data services = 'On '.
  • Network selection mode = "auto".
  • Technology network = "1XEV".

  4. close the 'mobile network options' screen to save the changes

  9630 smartphone Simulator should now have network connectivity.

  Sincerely,

  Adam

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the printer wireless HP D110

  Bought a new printer D110 last week.  Turned on, it has detected my wireless router Actiontec (Verizon FIOS) with signal max, and I logged it, using my WPA key.  It appears that he successfully connected and returned a hard copy report indicating that he has passed all the tests, at the address IP 192.168.1.4, which is within my reach.

  However, when I told the installer to use wireless rather than in USB mode and entered the IP address assigned to the printer, she returned with a message that it cannot connect to the printer.

  I disabled all firewall and antivirus software and repeat this step again and again, same result.  It's on a laptop Toshiba Satellite brand new under Windows 7 Home Premium.  The laptop has had zero problems wireless in and of itself.

  I repeated the installation on a 8 years old Sony Vaio laptop running Windows XP Home Edition with all the latest service packs and updates.  Same result, failure.

  I checked the software admin to the router, checked that it has detected the printer and assigned to this address.  However, neither the router nor either laptop can ping the printer successfully.  Laptops can ping each other, and the router pings successfully.

  I went to USB mode and connected the printer to the new laptop.  Works very well.

  I'm guessing there's a permissions/firewall problem going on here.  I don't use MAC filtering.  I opened the port 427 incoming UDP activity.  No change.  Any help appreciated.  Thank you.

  You can try to run WIndows Update again and again to make sure that your system is the last and largest.

  Also, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• Unable to connect to the printer 8500 A910

  When I first connect my printer to the router and install the printer driver on my computer, I can print documents. However, when I turn off and on the computer, the computer cannot connect to the printer (coz I can't print any documents) even if it is connected to the router.

  Anyone know how to fix this?

  Hi @Donald0812

  When you try to print, do you have an error message any? If so, what would you say?  While I wait for you, please complete the solutions proposed in the following 2;

  • Printer keeps no connection Wi - Fi
  • "Printer is off-line" Message appears on the computer and the HP printer does not print

  I hope this helps.

• I am unable to connect to the printer wirelessly to the computer.

  having problem connecting wireless laptop printer. any suggestions?

  Original title: can'tprint of the laptop computer using wireless

  Hi bill c w,.

  (1) this exactly happens when you try to connect to the printer?
  (2) that you get an error message or error code?
  (3) who is the manufacturer of the printer (with the numberof model )?
  (4) did you make changes on the computer?

  I would like more information about the issue.

  Method-

  Perform the steps in the article-

  Printer in Windows problems

  Network printer problems

  Note: applies to Windows 7 .

  Hope this helps!

• Unable to connect to the printer with El Capitan

  Hello

  I just upgraded to El Capitan 10.11.13 on my MacBook Pro and cannot connect to a Canon MPX470 printer.  There is no update of the driver from the Canon website.

  Anyone has a solution or work around?

  Thank you

  Roger S.

  Your model is not on the list of supported printers. You can find more information on the manufacturer's website. Otherwise, you may be able to get the printer working partially by manually selecting the driver for a similar model that is supported. Some features probably do not work as expected.

  Printers & Scanners preferences window, please click the sign more to add a printer. Opens the Add dialog box.

  Click the Advanced tab. Wait a few seconds for the search printer to fill, and then on the shortcut menu: use, choose

  Select the software...

  Another window opens with a list of available printer drivers. Only drivers that have been installed will be listed, not all drivers. Choose the one which in the model number closest to what you have, and then click OK.

• Unable to connect to the printer - HP photosmart premium c 410

  Macbook air OS x 10.9.5 using

  Printer and macbook show good wifi signal.

  Did the disconnect/reconnect the two devices and the comcast router.

  Check the "share printer on the network", on and outside.

  The printer works sometimes and at random.  Example: trying to print a Word document that has failed, but sometimes from one day to the next, the document printed.  Spookie!  But above all, the printer will not connect.

  Problem started after the two aircraft had been disconnected for a few days and move while some construction was conducted at the scene.

  Is there a setting that needs to be found and reset?  Could any dust, etc. of construction altering the router?  Please help, preferably with a simple solution.

  Thank you.

  arze1905

  Hey @arze1905 ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  If my name is Zac and I'll be your support agent to 1-1 for the same problem! I understand that you have recently moved the printer and the computer autour due construction and since the move has been random failures of printing and printing slow (like 12 hours later slow). Looking for help and I will do exactly that.

  So when I looked through hp.com I came across this "Slow printing" document that addresses the issue with the 10.9 Mavericks and other operating systems, and it seemed like the best place to start. So if you could please go through it and follow the steps and let me know how it goes it would be great! They are very descriptive and easy I promise you.

  Here is the link! Of printing to your printer HP are stuck in the print queue: v10.10 OS X Yosemite, OS X v10.9 Mavericks and v10.8 OS X Lion of mountain

  Get back to me and let me know how it all happens! Have a great day and wonderful / safe from holidays!

• OfficeJet 4630: Unable to connect to the printer

  I have been using an Acer laptop with a HP printer via a wireless router.  I had to replace the printer with a 4630, which is wireless, still has a USB port in the back.  I connected the cable from my tower to this port, then made the setup wireless according to instructions.  The printer works with the office, but not the laptop via the router.  I get no error message, nothing happens when I try to print.  Although it is a simple operation, I'm in over my head, being almost totally ignorant of Windows.  (With the help of Windows 7).  I guess the problem lies in how I have the laptop implemented, even if the old printer works perfectly with the desktop and the laptop.   The printer reported that it was connected after that I did the installation, and I have the blue light.  I know that the laptop can still access the router, as I have no problem connecting to the Internet.  Suggestions as to how I should have the laptop configured?

  Also, I got this message after you posted my message, but do not see what has been changed: "your message has been modified because the incorrect HTML code was found in the body of the message. Invalid HTML code has been removed. Please review the message and send the message when you are satisfied. »

  I solved my problem.  As I suspected, the problem is with the configuration of the laptop.  I deleted the network information and it built everything back, and now I can print to the desktop via a USB cable and the laptop through the wireless router.  Thanks for your efforts.

  RG4

• Unable to connect to the printer; Printer is showing offline.

  Title: Laptop computer Dell / HP printer

  I have a connection for my printer and ran the disc.  My printer is showing ofline.  How can I change jobs online?

  Hello

  -What is the printer model number?
  -How the printer is connected to the laptop (USB / network)?
  -What is the exact error message / complete you receive?
  -What is the operating system installed on your computer?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: Run the Microsoft FIXIT from the link below and check if the problem persists.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2: So I recommend that you follow the steps from the link below and check if that helps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Method 3: Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network
   
  See also the links below which can help you to get help.
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  Can't print to network printer from Windows 7 64 bit computer
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/51dfa0e0-74b3-48d3-83a1-1770ef5ceb1e
   
  Hope this information helps.