Unable to connect to the site by clicking on the link in an email

Similar Questions

• Unable to connect to the links in my emails

  I recently had my firewall/security update and now I can't connect to the links in my emails from hotmail. Does anyone have a solution for this?

  Hello Carol,.

  Thank you for your response.

  I appreciate your time and your concern.

  It is good to know that the problem does not persist in Internet Explore.

  However, you can reset the Firefox browser by using the steps in the following article:
  https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

  Please keep us updated.

  Thank you

• Unable to connect to the Web sites security and microsoft, but internet is not working properly

  Can anyone help?
  Now, this is getting very frustrating.
  I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
  What is going on?
  I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
  Please help before I go out what remains of my hair.
  What about Frank

  Hello

  You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.

  Check with this site
  http://www.confickerworkinggroup.org/infection_test/cfeyechart.html

  Alert on the Win32/conficker virus
  http://support.Microsoft.com/kb/962007

  Protect yourself from Conficker
  http://www.Microsoft.com/security/worms/Conficker.aspx

  How to remove the worm Downadup Conficker (Uninstall Instructions)
  http://www.bleepingcomputer.com/virus-removal/remove-Downadup-Conficker

  How to manually remove the Conficker worm
  http://www.411-spyware.com/Conficker-worm-removal#how-to-remove

  BDTool to remove
  http://www.bdtools.NET/

  -----------------------------------------------

  Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
  malware involved and if necessary use UnHackMe.

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  Here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Run Malwarebytes when you can.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  Close IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Don't forget to do:

  Logon as administrator

  Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN

  Enter each of these one at a time and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset
  ------------------------------------------------------

  Here are a few rootkits if it were a question:

  SpyDLL Remover - free
  http://securityxploded.com/spydllremover.php

  Advanced Windows Service Manager
  http://securityxploded.com/winservicemanager.php

  Run the Rootkit Revealer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspx

  UnHackme - trial
  http://www.Greatis.com/UnHackMe/

  This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
  available as version above is 5.5
  http://safecomputing.umn.edu/guides/scan_unhackme.html

  IceSword - free
  http://www.AntiRootkit.com/software/IceSword.htm
  Instructions and pictorial
  http://securityxploded.com/IceSword.php
  Tutorial for use of IceSword
  http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3D

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• After installing an update on Friday morning, I am unable to connect to the HTTP site

  I ran an update Thursday night and Friday morning that I was unable to connect to the internet. After a repair, it seems that I can connect to https and ftp sites, but I can't connect to non-secure http sites. I don't know if a setting has been changed or if there is another question. Thanks in advance for any help.

  original title: unable to connect to http sites

  I finished to restore on the eve of the update and everything works. I did it after trying the method 1 & 2 above. WinHTTP was not anywhere on the list of services and connections have been implemented according to the instructions. I hesitate to run updates until I know what caused the problem.
  The browser is IE.
  Here's the ID numbers updates which took place:
  KB2618451, KB2618444, KB2544893, KB2564958, KB2592799, KB2619339, KB2620712, KB2624667, KB2633171, KB2639417, KB2633952, KB2641690 AND KB890830.

• Unable to connect to the microsoft career site to apply for jobs

  Unable to connect to the microsoft career site to apply for jobs, even with google, facebook, or linkedin

  It redirects and come back with nothing invites me to reconnect

  Help, please

  Hello

  We do not work for Microsoft.

  We are mainly volunteers here.

  I'm sorry, but this section of Microsoft, the Microsoft community, is dedicated to answering questions of posters on the hardware and software problems with their computers, computer hardware, etc.

  This is all the information that we have.

  http://careers.Microsoft.com/

  http://careers.Microsoft.com/careers/en/us/get-help.aspx

  Kind regards.

• Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Hi qksdjhfb,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• Unable to connect to the main DNS server when you try to access the internet

  Computer has worked fine for the year last until 2 weeks ago and now unable to connect to the internet.

  Windows Vista on broadband and services connected directly to the modem by ethernet.  Provider Internet has run tests and confirmed modem is fine and it's like my laptop runs very well on it.

  Re-initialization of the modem, internet works and you can type in a few places and it seems OK, but you can't do anything on a site, it is, enter the details and even if you try and enter anything, you can usually view 2 sites and then it goes again.  However, the network icon shows that on and connected to the internet.

  The diagnosis, it is said that he cannot access the primary DNS server.

  Do you have any idea how I can fix this or should I just completely re - install windows from the original disk set?

  A few things you can try...  [This will be the Windows to try to automatically fix your connection]

  Open 'Network and sharing Center' (you can search for it in the Vista Start menu)

  Under tasks, click on "diagnose and repair".

  If this fails, you can try...  [This will use the NETSHell utility to RESET your network interface (removes all static configurations and sets DHCP)]

  Open a command prompt (you can also search for it on the start menu in Vista, if you have this OPTION enabled, you need to start as administrator)
  The type of command line: NETSH INTERFACE IP RESET. JOURNAL

  If you still have problems, try to post your IPCONFIG/all, file HOSTS and ROUTE PRINT on this forum.

  How to:

  IPCONFIG/ALL
  Open the command prompt and type: IPCONFIG/all
  To save the output to a file simply type at the command prompt: IPCONFIG/all > filename.txt

  Your HOSTS file is located in the following path (the HOSTS file does not have an extension, it is simply named "HOSTS"):
  %windir%\system32\drivers\etc\HOSTS
  or
  C:\Windows\System32\Drivers\ETC\HOSTS

  ROUTE PRINT
  Open the command prompt and type: ROUTE PRINT
  To save the output to a file simply type at the command prompt: ROUTE PRINT > filename.txt

  PS: If it becomes really hairy, you can provide NETSH DUMP (this provides virtually all network configurations)... You certainly shouldn't need to re - install Windows.  There is probably a setting of network configuration problem that causes this problem.  Good luck!

  -Rob

• Unable to connect to the broadcast of radio stations

  I use Windows Vista.  When I go on stations WAMU and only ONE line, if I click on listen with Windows Media Player, I get a message that says: unable to connect to the internet. If I click on another format, I receive a message to install Real Player to the Radio, but I is installed.  I checked the firewall and can find no evidence that the programs are blocked.  With my old XP computer, I had no problem streaming radio connection.

  Hello

  • You use Internet Explorer to the streaming radio station?

  If so, you can follow the link described which may help you to solve your problem:

  How to optimize Internet Explorer

  http://support.Microsoft.com/default.aspx/KB/936213

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Unable to connect to the selected Mobile Data Service, please try again later.

  Dear all,

  I downloaded Blackberry email and MDS Services 4.1.4 and the Blackberry 9630 Simulator Simulator. I'm testing a blackberry asp.net application I have running on a test server using the blackberry Simulator.

  I have windows XP box. When I try to run the SDM Service, it runs without error, but acquire it on the site - http://www.blackberry.com/go/mobile - error saying above message - unable to connect to the selected Mobile Data Service, please try again later. How can I solve this problem, I tried to use full qualified names in the config file.

  Any ideas?

  NAV.

  Hi Nav, thanks for your message.

  When you use the BlackBerry 9630 Smartphone Simulator, you may need to change its default connection settings in order to provide network connectivity.  The reason why because the 9630, being a world phone, supports different types of network technologies and a configuration change may be needed to make it work with the MDS Simulator - CS.

  1. from the home screen, click the 'manage connections '.

  2. a popup window opens, select "Mobile Network Options '.

  3. in the options screen, ensure that the following field values are defined:

  • Data services = 'On '.
  • Network selection mode = "auto".
  • Technology network = "1XEV".

  4. close the 'mobile network options' screen to save the changes

  9630 smartphone Simulator should now have network connectivity.

  Sincerely,

  Adam

• Unable to connect to the web.

  I have an Inspiron One 2305. Yesterday morning, everything was fine. Before noon I couldn't connect to the web. The network connection shows that I am connected. I always get an error "unable to connect to the page. I ran anti-virus and malware. Still nothing. Do a system restore I can connect on a single page. Try to leave this page and I get the same error. Can someone give me an idea?

  At this point you can repair or reinstall Win 7. Make sure that all of your personal files are stored on a medium firstexternally.

  To do a repair, you will need your reinstall Dell Win 7 drive. Start with a hard disk check

  • Click Start > run
  • Type: chkdsk c: /f
  • Click OK
  • Accept offer to run chkdsk at the next startup, and then restart. CHKDSK runs before Windows loads. Be patient as this can take some time, depending on the size of your hard drive.

  Unlikely that chkdsk will solve the network problem, but check it anyway...

  Then run a check of Windows system (CFS) files:

  • Click Start > run
  • Type: sfc/scannow
  • Click OK
  • Insert the Dell Windows reinstallation disc, if/when requested
  • Restart when done
  • Check again networking

  If this does not help, make sure that your files are backed up! Restart, and then press F8 before Windows loads. Look for the option of repair that may be on an advanced options menu. Follow the prompts. See if that solves network problems. And don't forget to visit the Windows Update site and reinstall all updates that are missing after the repair.

• Unable to connect to the Update Center

  I just finished my fifth unsuccessful attempt to install jdeveloper 11.1.1.4 on a laptop from scratch. I already had a 11.1.1.3 installation and work of the need to upgrade to 11.1.1.4 to align with the SOA server I have deploy across the network.
  
  I removed 11.1.1.3 and 11.1.1.4 facilities (via windows install/uninstall program, and then manually deleting directories that they were in), and then try to reinstall several times, remove after each unsuccessful attempt).
  
  My problem is when I try to install the extension of SOA. After the initial installation of the software in JDeveloper, I'm going to "Help"-> "check for updates... ».
  Rather than see a list of locations to update I get a popup on top of the Update Center popup, which claims that it is:
  
  Unable to connect to the internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your settings of proxy below and click OK to try again.
  
  Normally, I use a url of proxy auto to manage my access to the proxy for that so I'm VPN would be in my company or not, Firefox handles my access network correctly. Because it is not an option in the context menu, I found a proxy host and tried to use it while I was VPN in. That has not helped - I tested the proxy of the popup and it failed. I Redid the installation 2 - 3 times while only had in VPN, then abandoned.
  
  So I uninstalled everything, disconnected VPN and did another fresh install. There is also no in the same way (Nothing in the center of update list and I got the same error popup).
  
  It's a mystery all that JDeveloper is really doing. It makes me crazy when the software works not seamlessly like this. I don't see what it is really doing, and the error message is useless or worse. (Why is she even suggesting that I provided a proxy when I'm straight on the internet. Why didn't he just tell me what he's trying to do, and, if I can fix it). I have a fine Internet connection that works for everything else.
  
  I know JDeveloper is still caching configuration information (my two projects appear in the list of applications), and so I guess that's also implementing caching some old login information that it does not show me. But I find no visible which erase and start over.
  
  Anyone know how to get JDeveloper to just try to connect directly to find update centers after that he cooked the old way to do it in a file somewhere hidden?
  
  Thank you

  Hello
  If JDeveloper is installed successfully, then you are good to go. Come to the addition of Extensions for SOA, BPM etc, you can do this either online (directly and update the Oracle site) or offline also. Average offline, first download the corresponding ZIP extension files for your version of 11.4 JDev as a composite model soa, bpm, Publisher etc. Then click on help-> Check For Update-> ignores errors or the pop-up windows and cancel-> them on the screen main down check the box named "install local file". Here browse and select a zip file at a time and move forward.

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.SCA.Modeler (Oracle SOA Composite Editor-> 11.4)
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.BPM.fusion.Studio (Oracle BPM Studio-> 11.4)

  For SOA/BPM, simply just above 2 extensions.

  Thank you
  Ravi Jegga

• Unable to connect to the App Store and auto delete app

  Hi, I never update my ipad because I never, and I do not have the space for it anyway. Now and then I get the message saying ipad needs space for the update, press ok to allow deletion, or something in that sense. Theres two options cancel or ok. Today I accidentally pressed ok. He deleted my largest app and now I am having problems with the App Store. I can open it and see the recommended page. I think I can upload them as well, but when I use the search bar, it says unable to connect to the App Store. I don't know what to do and how to cancel.

  First of all, make sure that you don't have enough free space before trying to re-download the application. Once you know that you have enough space, try these two ways to get to the app.

  Click on the tab purchased on the App Store and see if the application appears in a search here or just trying to slide through until you see the app and then download it from there.

  If this does not work, do a Google search for the app. It should appear in the search. Tap on the app in the Google search and who should open the description window app on the App Store with the download next to the app icon.

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.