LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

Similar Questions

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• HP LaserJet 200 colorMFP M276n: HP LaserJet 200 colorMFP M276nw won't sleep

  HP LaserJet 200 colorMFP M276nw'm not going to sleep no matter how configure configuration.

  It ' on an Ethernet cable. WiFi and FAX are disabled. No local USB not connected. LCD Panel and web access see the that he was put to sleep after so many minutes of inactivity.

  He used to go to sleep, that is the LCD screen is off and the power LED flashed, as expected after the period button inactive specified, 15 min...

  I'm not 100% sure, but I guess it started showing this symptom as I replaced the black cartridge with a genuine HP one. Nothing has changed, and I doubt that if the issues of the cartridge. I've updated the firmware to 20150212, but no help.

  When I tried to update the firmware locallly, the LCD panel said he is not able to connect to the server even though it is perfectly on our LAN and connected to the Internet. For example I can scan documents to send to e-mail addresses.

  All attempts resulted negative. So I have a chat session with a HP tech support but it could not solve the problem. In addition, there was a much more serious problem with the printer which toners all came out with less than 100 printed pages. However, HP has launched a warranty replacement process and I'm waiting for the forthcoming replacement.

  Thank you, John, to remind me of important base of troubleshooting by isolating the problems one by one!

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

  Printer: HP Laserjet ColorMFP M276nw 200

  Installation: cable network using the complete package PCL6 (last available online)

  OS: 8.1 64-bit Windows

  Problem:

  When you print to some programs (for example the Page of Test, Microsoft Word), the printer prints a page with the following text:

  PCL XL Error

  Subsystem: kernel

  Error: IllegalTag

  File name: kernel.c

  Line number: 1921

  Printing from Notepad works very well. Printing on other computers on the wired network is working properly.

  Troubleshooting steps:

  1. Updated firmware update
  2. Uninstall, and then reinstall using the latest version of the software available online
  3. Changing to optimize for the text on the Advanced tab.

  Thank you for your help.

  As explained above, it could be a fault of the driver, or intermittent corruption by the hardware, or (as http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 says) the result of a recent update of AVG anti-virus.

• problems of Config on HP LaserJet 200 colorMFP M276nw e-mail

  Hello

  I'm trying to set up my scanning to e-mail via the web interface of the printer (from my Mac).

  I get my information from e-mail server exactly as my e-mail client is configured, but when I test, I get the following error:

  Cannot resolve the SMTP server. Check this setting with your system administrator or your Internet service provider.

  The specified server is smtp.cogeco.ca and port 25.  No authorization is required (Cogeco is my ISP, and I'm on their network).  I can telnet to the server of my Macbook on port 25 and both my Macbook and the printer are connected to the Cogeco network using the same WiFi router.

  I can scan to a network folder in my local network without any problems.

  I'd like to get the scan to E-mail feature works, but without details of the connection problem, I do not see how to do this.

  Any suggestions?

  Hi Spin2Win,

  I appreciate that you try to configure the scan to e-mail.

  I'll be happy to help you.

  I have provided a document for how Scan: from the control panel. Select Scan to an email.

  If you're still having problems, then go to the printer's built-in Web server by typing in the IP address of the printer in your web browser.

  Click the network tab, and then click config IP4 on the left side.

  Click on the network (IP) address

  Select Manual.

  Type in the information and the IP address of the printer.
  Set the Configuration to manual DNS address.

  Set the default address as 8.8.8.8
  Set the e-mail address alternative as 8.8.4.4 and confirm the changes.

  Try the implementation again.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Bought HP Laserjet Pro 200 color printer & unable to connect

  Bought HP Laserjet Pro 200 color printer & unable to connect to my Windows 7 laptop. The printer setup was a snap, but no connection. Tried all Windows resources, but...

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Unable to connect to the agent

  And another question :-(

  Enterprise manager cannot connect to any remote agent.

  He notes:

  SERV01.localdomain unable to connect to the agent at https://DBSERV01.localdomain:3872/emd/hand / [No route to host]

  If connect you to the address via firefox:

  Access to Firefox:

  EMAgent 12.1.0.4.0

  Congratulations, EMAgent work!

  
  

  If I try to connect to the url of the agent from the server on which GRID is running:

  wget - No.-check-certificate https://192.168.146.130:3872/emd/hand /

  "" WARNUNG: Kann das Zertifikat von "192.168.146.130"nicht prufen, von ausgestellt"" / O = EnterpriseManager on LinuxGRID.localdomain/OR = EnterpriseManager on LinuxGRID.localdomain/L = EnterpriseManager on LinuxGRID.localdomain/ST=CA/C=US/CN=LinuxGRID.localdomain««:.

  Ein signiertes selbst Zertifikat found.

  "WARNUNG: certificate requested host name does not match the common name ' SRVB01.localdomain ' ' 192.168.146.130 '. '.

  
  

  Edit: I have re-released the comand and replaced ip number with the correct host name - the warning about the corresponding certificate not came yet.

  Gesendet HTTP Anforderung, warte auf Antwort... 200 OK < < < ==

  Lange: nicht spezifiziert

  In"' index.html '"speichern. "

  [ <=>                                                                                                                                                        ] 175         --.-K/s   in 0s

  2015-05-21 21:36:36 (47.0 Mbps) -"' index.html ' ' sales [175]»»

  This seems ok to me.

  The connection to the repository is great too:

  Oracle@SRVB01 Agent] $ wget - No.-check-certificate https://LinuxGRID.localdomain:4903/empbs/upload

  -2015-05-21 22:12:36- https://linuxgrid.localdomain:4903/empbs/upload

  Auflosen of host name"linuxgrid.localdomain «...» 192.168.146.120

  Verbindungsaufbau zu linuxgrid.localdomain | 192.168.146.120 |: 4903... clear.

  "" WARNUNG: Kann das Zertifikat von "linuxgrid.localdomain"nicht prufen, von ausgestellt"" / O = EnterpriseManager on LinuxGRID.localdomain/OR = EnterpriseManager on LinuxGRID.localdomain/L = EnterpriseManager on LinuxGRID.localdomain/ST=CA/C=US/CN=LinuxGRID.localdomain««:.

  Ein signiertes selbst Zertifikat found.

  Gesendet HTTP Anforderung, warte auf Antwort... 200 OK < < ==

  Lange: 314 [text/html]

  In"" Download ""speichern. "

  100%[===========================================================================================================================================================>] 314         --.-K/s   in 0s

  2015-05-21 22:12:36 (1.81 MB/s) -"" Download "" sales [314/314]»»

  Some agent messages:

  [oracle@SRVB01] of $. / emctl status agent

  Oracle Enterprise Manager Cloud control 12 c Release 4

  Copyright (c) 1996, 2014 Oracle Corporation.  All rights reserved.

  ---------------------------------------------------------------

  Agent version: 12.1.0.4.0

  Version of the WHO: 12.1.0.4.0

  Protocol version: 12.1.0.1.0

  Home Agent: / u01/app/oracle/product/Agent/agent_inst

  The agent logs directory: / u01/app/oracle/product/Agent/agent_inst/sysman/log

  File binary agent: /u01/app/oracle/product/Agent/core/12.1.0.4.0

  Agent process ID: 9477

  Parent process ID: 9409

  Agent URL: https://SRVB01.localdomain:3872/emd/hand /

  Local agent NAT URL: https://SRVB01.localdomain:3872/emd/hand /

  Repository URL: https://LinuxGRID.localdomain:4903/empbs/upload

  Starts at: 2015-05-21 21:24:34

  Started by user: oracle

  Operating system: Linux version 3.8.13 - 68.2.2.el6uek.x86_64 (amd64)

  Last charging: (none)

  Last download successful: (none)

  Last attempt to download: (none)

  Total megabytes of XML files uploaded so far: 0

  Number of XML, waiting for loading files: 0

  Size of the XML files in the upload wait (MB): 0

  Available disk space on the file upload system: 75,14%

  Collection status: activated Collections

  Pulse Status: Ok

  Last heartbeat to WHO attempt: 2015-05-21 21:43:38

  Last pulse in SGD: 2015-05-21 21:43:38

  Then, at the request of the heart rate to WHO: 2015-05-21 21:44:38

  ---------------------------------------------------------------

  Agent is running and ready

  /emctl download agent

  Oracle Enterprise Manager Cloud control 12 c Release 4

  Copyright (c) 1996, 2014 Oracle Corporation.  All rights reserved.

  ---------------------------------------------------------------

  Download EMD completed successfully

  But if I do a check - no uload happened

  [oracle@SRVB01 bin] $. / emctl status agent

  Oracle Enterprise Manager Cloud control 12 c Release 4

  Copyright (c) 1996, 2014 Oracle Corporation.  All rights reserved.

  ---------------------------------------------------------------

  Agent version: 12.1.0.4.0

  Version of the WHO: 12.1.0.4.0

  Protocol version: 12.1.0.1.0

  Home Agent: / u01/app/oracle/product/Agent/agent_inst

  The agent logs directory: / u01/app/oracle/product/Agent/agent_inst/sysman/log

  File binary agent: /u01/app/oracle/product/Agent/core/12.1.0.4.0

  Agent process ID: 9477

  Parent process ID: 9409

  Agent URL: https://SRVB01.localdomain:3872/emd/hand /

  Local agent NAT URL: https://SRVB01.localdomain:3872/emd/hand /

  Repository URL: https://LinuxGRID.localdomain:4903/empbs/upload

  Starts at: 2015-05-21 21:24:34

  Started by user: oracle

  Operating system: Linux version 3.8.13 - 68.2.2.el6uek.x86_64 (amd64)

  Last charging: (none)

  Last download successful: (none)

  Last attempt to download: (none)

  Total megabytes of XML files uploaded so far: 0

  Number of XML, waiting for loading files: 0

  Size of the XML files in the upload wait (MB): 0

  Available disk space on the file upload system: 75,14%

  Collection status: activated Collections

  Pulse Status: Ok

  Last heartbeat to WHO attempt: 2015-05-21 22:03:39

  Last pulse in SGD: 2015-05-21 22:03:39

  Then, at the request of the heart rate to WHO: 2015-05-21 22:04:39

  There is no active firewall

  I tried to fix it with this command:

  " . / emctl remove property - name" oracle.sysman.core.omsAgentComm.ping.pingCommand "" "

  Hope everyone has an idea

  I think I solved this problem.

  First configure everything the maschine again one by one, don't use is not the function of the cloning of VM.

  Adding a link

  ln-s /lib64/libpcap.so.N.N.N r/lib64/libpcap.so.0.9.4

  and installed there yum install subversion

  I installed the packed listed in the Enterprise Manager configuration by hand.

  Before that I did by yum install oracle-RDBMS-server-11 GR 2-preinstallation.

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to connect to the App Store and auto delete app

  Hi, I never update my ipad because I never, and I do not have the space for it anyway. Now and then I get the message saying ipad needs space for the update, press ok to allow deletion, or something in that sense. Theres two options cancel or ok. Today I accidentally pressed ok. He deleted my largest app and now I am having problems with the App Store. I can open it and see the recommended page. I think I can upload them as well, but when I use the search bar, it says unable to connect to the App Store. I don't know what to do and how to cancel.

  First of all, make sure that you don't have enough free space before trying to re-download the application. Once you know that you have enough space, try these two ways to get to the app.

  Click on the tab purchased on the App Store and see if the application appears in a search here or just trying to slide through until you see the app and then download it from there.

  If this does not work, do a Google search for the app. It should appear in the search. Tap on the app in the Google search and who should open the description window app on the App Store with the download next to the app icon.