Unable to display which are hidden folder
There is an option to access hidden folders. Click Start-> computer-> organize-> folder and search options. Then click the view tab. On the 6th in the list entry it controls whether you can see hidden files, folders and drives. A couple of entries to the bottom also controls you can see "protected operating system files". You can set these to give you the control you want, but be aware that when you access a system of files and folders, you have the power to make Windows unusable, so be very careful!
Good luck.
Tags: Windows
Similar Questions
-
Hello
There were some cases where the new indicator that I created was actually overlaps the other indicator which was hidden at the time of development.
I knew only when the program is operating normally and the hidden indicator will appear on the front panel.
It would be great if I can see all the elements of hidden façade while in development mode.
Is there an easy way to do this or am I missing something?
Thank you.
Steve
See here: http://forums.ni.com/t5/LabVIEW/Darren-s-Weekly-Nugget-08-14-2006/m-p/403788
You can also choose to vote in favour of this idea: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Show-all-hidden-controls-and-indicators/idi-p/1113431
-
ID display which are repeated several times
Hello
I want to display the person ID who works is more than any defined countries ('INDIA', 'USA', 'US', "CHINA", "JAPAN")
for example, ID 1001 works in USA and India. so output should pick up this ID. But I get no output
can someone help me.
with t as
(
Select 1001 as ID, 'USA' as countries of all the double union
Select 1001 as ID, 'INDIA' as countries of all the double union
Select 1002 as ID, 'USA' as countries of all the double union
Select 1002 as ID, 'US' as countries of all the double union
Select 1003 as ID, 'ARGENTINA' as countries of all the double union
Select 1004 as ID, 'USSR' as countries of all the double union
Select 1005 as ID, 'INDIA' as countries of all the double union
Select 1006 as ID, 'TAIWAN' as countries of all the double union
Select 1009 as ID, 'CHINA' as countries of all the double union
Select 1009 as ID, 'BHUTAN' as countries of all the double union
Select 1006 as ID, 'JAPAN' as countries of the double
)
Select * from t
WHERE COUNTRIES ('INDIA', 'USA', 'US', "CHINA", "JAPAN")
Group by id, country
Having count (distinct id) > 1
Hello
Since you only want to see the identity card, then you must include the id in the SELECT and GROUPBY clauses.
SELECT id
T
Countries WHERE the ('INDIA', 'USA', 'US', "CHINA", "JAPAN")
GROUP BY id
After HAVING COUNT (DISTINCT country) > 1
;
If you are grouping BY id, then COUNT (DISTINCT id) will always be 1 (or 0). We are not interested in how different IDS are in each group. We are interested in how many different countries in each group there.
The query above is considered 'USA' and 'WE' different countries. Is that what you want?
If this isn't the case, you can map 'WE' to 'USA' (or vice versa) like this:
SELECT id
T
Countries WHERE the ('INDIA', 'USA', 'US', "CHINA", "JAPAN")
GROUP BY id
HAVING COUNT (DISTINCT CASE
Country WHEN = "en".
THEN "USA."
OTHER countries
END
) > 1
;
You did a great job, view the sample data! Don't forget to post the exact results you want from these sample data.
-
I'm unable to uninstall Windows Media Player 11, because it seems that the hidden folder $NtUninstallwmp11$ and its content have been accidentally deleted from my computer by another software. I want to go back to the previous version of Windows Media Player (WMP10). Please let me know how to uninstall WMP11 or back to WMP10.
Please note that the process mentioned in this MS article did not.http://support.Microsoft.com/kb/934372Thanks in advance.original title: impossible to uninstall WMP11Hello
Try to restore the system to the date and time when the computer was working fine.
Click on the link below.
http://support.Microsoft.com/kb/306084
If you are still experiencing a problem, I suggest you try to post in the link mentioned below.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
Outlook Express messages are hidden there not displaying not new messages
The display in the name of the customer.
Outlook Express messages are hidden there not displaying not new messages
Try to go to view | Current view | Show all messages and do not check the chat messages.
If its possible that there is corruption of the Inbox and the user can move all messages from the Inbox to another folder created by the user and then close OE and delete the inbox.dbx file. OE will create a new.
Now is the right time to save messages: see www.oehelp.com/OETips.aspx#6
Steve
-
I saved in the folder in which are stored all the links or brands?
My computer is broken. I need to save all the brands or the links I saved in Mozilla. File in which are stored all these marks on websites, in that I am saved? I can not find this folder or the prompt.
places.SQLite in your profile folder has them.
-
My "file, editing, display, history, Favorites, tools and help" options are hidden, I do not know how to make them visible.
This has happened
Just once or twice
== My father-in-law messed with settings and downloaded a toolbar.
Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
-
File, folder names are not displayed in my pictures folder
Original title: file folder names
Folder names are not displayed in my pictures folder
Hi soren123,
1. don't you make changes before the show?
We recommend that you press the SHIFT key and change the folder view settings. To do this, try the following steps:
a. open the folder my pictures.
b. press the SHIFT key, right-click the empty space in the folder my pictures and change the display settings.
c. continue to change the display settings until you see the name of the file or folder.See How to arrange files using folder in Windows XP views
Visit our Microsoft answers feedback Forum and let us know what you think.
-
In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»
I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.
I have not changed anything. I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.
Help. Any ideas? Thank you
When you click the expand button in your files window, whose icon is selected in the upper part?
The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).
If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?
If you do not have a local server running on your F drive, remove the test server info, it is not necessary.
-
Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?
Yes, thanks it works!
-
Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project. I checked the preferences of quiz and enabled for the draft declaration. I use SCORM 1.2. My LMS is not listed (MCN) and so I chose 'other LMS standard. Any ideas on why I see the results?
Publish your SCORM SCORM Cloud and test if it will show you the results you want. If so, then your problem is with your LMS. If this is not your problem may be due to something in the settings of your current project. Eliminate one thing at a time.
-
I have many files on my drive 'C' which are empty and I want if I can delete these folders without harming my computer?
For example, in C, I have an empty folder called Config.Msi.
Another folder called perflogs folder with empty named Admin.
Also under perflogs folder a subfolder called Diagnostics with you I have subfolders under him and one of the files is empty. each subfolder begins with a date, then a-0002, 0003, 0004 (it is empty).
Under Program Files, I have a folder called MSXML 4.0 and it is empty.There are a few empty folders and subfolders. If they are not needed I see no point in keeping it in particular it it slows down my computer.
Any help or insight will be appreciated. I'm not very computer savy, but have a bit of knowledge.
Hi Louise,.
The files you mentioned are used by system files and processes for various reasons. These folders are hidden by default.
CONFIG. MSI folder is a folder hidden on the drive root Windows, usually C drive. The folder is used by the Windows Installer process during the installation of the software.
Essentially the CONFIG. MSI file contains backups of files that are installed or updated during a program installation. A success, this folder and files are deleted automatically. However, sometimes the installation program is unable to delete these files. In this case, you can safely remove the CONFIG. MSI file and the files on your hard drive.
All of these folders you see are file system created and I would leave him alone.
You can run Disk Cleanup to delete temporary files on the computer.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
-
"$RECYCLE." BIN"and"System Volume Information"hidden folder created in each drive
I got 15 HP r014tx Notebook in which "$RECYCLE." BIN"and"System Volume Information"folder created in each player automatically hidden name. It didn't get deleted if I try to remove it. I use McAfee Anitvirus come with pre-installed with 30-day track.
I want to know how to remove this folder "$RECYCLE." BIN"and"System Volume Information"hidden folder name.
It is IMPORTANT that you do not delete these files. They are very important to the operating system.
Instead, you can hide:
- Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.
- Click the view tab.
- Under Advanced settings, make sure that "Show hidden files and folders" and "Hide protected operating system files ' are not checked, and then click OK.
* TechWars *.
-
Some of my library files are hidden in Windows 7
Some of my library files are hidden for a reason, such as music, documents and pictures. My download folder is not. I know they are there; I went to Union - folder and search - options display the files and folders and they appear, but Misty as they are hidden. So I checked the files they point, they were awarded 'hidden', so I not hid them, still foggy folders shortcuts and hidden. I can't select an attribute for the shortcut when I right click on say that the images in the left pane.
What's wrong? Can anyone tell me please where to change it, so I can fix it.
James
Hello
You did it changes on the computer before the problem started?
By default, the folders in the library (images, music, documents and videos) are displayed and you cannot hide.
Follow these steps and check if it solves the problem:
Step 1: Resetting folder view settings.
a. click on tools in the menu bar of Windows Explorer window and choose Folder Options.
b. in the Folder Options window, select the view tab and click on the button Reset records.
c. you will be asked to confirm if we reset all folders of this type to the default view configuration, click Yes.Step 2: download and run the tool fixit from the link below:
Diagnose and repair Windows files and folders problems automaticallyStep 3: perform a system restore to restore the computer to an earlier point in time before the problem started.
Check out these links for help:
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsKind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think. -
After save, populated the Table lines are hidden
I have a Livecycle form that connects to a MS Access database. Everything works as expected with the exception of one question. If I have more row of tables not hidden and save the form, when I reopen it, all lines except the first row are hidden again. I check that the lines are visible when I save the form. Close it and when reopened, all but the first row are hidden again.
When the form opens initially empty, it connects to the database and there is only one visible line. The other 12 rows are hidden. I have a custom button that makes an extra line visible whenever it locks. I can't find any script that causes these lines to be hidden or invisible. Could the script database below be the cause? If I stop the problem ceases only I do not know how there about!
Form1.Subform1.EmployeeNo::exit - (JavaScript, client) //HEADER SECTION //Reset DB to first Record //Walk thru all records to find highest file ID number /* var nMaxID =0; //Reset DB to first record var oDB = xfa.sourceSet.DataConnection1; try{ oDB.first(); } catch(e){ oDB.open(); oDB.first(); } //walk thru all records to find latest file ID while(!oDB.isEOF()){ if(xfa.record.DataConnection1.FileName.value > nMaxID) nMaxID = Number(xfa.record.DataConnection1.FileName.value); oDB.next(); } if((Subform1.FileName.rawValue ==null && Subform1.FileName.rawValue !="")){ Subform1.FileName.rawValue = nMaxID + 1; oDB.addNew(); Hide1.FileName1.rawValue = FileName.rawValue; oDB.update(); Subform11.FileName.rawValue = Subform1.FileName.formattedValue; this.resolveNode("OrderDate").rawValue = util.printd("yyyy-mm-dd", new Date()); } else { Subform1.FileName.rawValue = Subform1.FileName.rawValue; }
Could you add an doc::ready event which displays the lines if they have something inside?
var stopPlayingHideAndSeek = xfa.resolveNodes(tblStuff.Row1[*]); for (var i = 0; i
Edit: correction of the errors in code
Maybe you are looking for
-
Office Jet 85000: recover faxes that have not arrived
Fax sent to me did not arriveCan I get it back?
-
Photosmart 6520: HP Photosmart printer will scan wireless but do not print wireless
Two days ago my HP printer suddenly stopped printing wireless. My MacBook says "could not find the printer. I can scan wireless from my macbook to my printer but when I print wireless it can't find it. My internet has not changed, the router has n
-
Service update of Adobe Flash Player in Firefox WXP starting guard and abandonment
I get repeated notices that Adobe Flash Player Update Service 11.3 has to close
-
File names not the title song appearing
Product: Clip Zip Firmware: 01.01.17 basically instead of the title of the song in the playlist, the song is listed under its file name. Now, I know that this is not a problem with the MP3 itself because these songs worked perfectly on my old Sansa C
-
Cisco UCS M81KR as a CF target?
Anyone know if the UCS M81KR and be configured for a virtual interface of the CF can work in target Mode. I'm looking at the possability of the creation of a mechanism of blades storage virtualization software, but I need CF target for servers to pro