Unable to get the extension when the sample memory running

Similar Questions

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• Unable to get the windows updates, it returns an error (often 0x8007043c and other similar)

  Original title: can't get windows updates

  I was unable to get the updates of windows - via the feature of automatic update, or through the manual method to access microsoft.com.  When I go to the microsoft update Web site, and it starts to scan my PC, it returns an error (often 0x8007043c and similar).  I tried to run Microsoft FixIt.  It tells me that windows up-to-date devices require to be repaired, but when I run the repair (problem-solving), he continues to run for hours and hours and doesn't do a thing.  How can I remove the software from the Windows Update Agent from my PC and reinstall a new version?

  Hi JosephGPhD,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

   

  Method 2: If the method above does not help then you can see the article mentioned below and check.

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Error: Unable to get the 'platform' of undefined reference property or null

  I am updating a Web site on a computer that had Dreamweaver Cs4 installed as a transfer file from another computer. I get an error (unable to get the 'platform' of undefined reference property or null). The current computer has Windows7. How to upgrade to the operation of the platform within the program? What is the problem?

  What are you trying to do exactly?

  Files created in DW are not specific platform (they are just .html, .css, .js, etc.), but the program itself is when it's one of the older versions of perpetual license / disc.

  Adobe does not swap the platform for something else that current versions, however the current version (PCOC 2014) is not really specific platform more since you can have it installed on two machines, regardless of the platform. So, basically, ranking/cross-platform interchange is not permitted more.

  Product order | Platform, language Exchange

• Unable to get the restore to work - Satellite 1410 disc

  I have a Toshiba Satellite 1410. During a restore of system with restore disks, I forgot to plug it. During the windows set up (this screen where you put in your country and all that) the battery has flat that I plug!

  I tried to throw the disc again, as it came with a box when I rebooted that said "the system is not fully restored. Please re-run Setup '. So I turned off and restart, then the message goes up after that windows image appears during startup.

  I bought this laptop second hand so I have all the manuals or books with him, I do not know the keys on which support to MSDOs not that I know what to do from here, I do not know which key press during boot up to get the CD to work, I have pressed the keys left right and Center and found exhaust takes me to a page of the system but anything to get the CD to run again that I thought would get just the restoration will once again.

  So now it starts up saying ' not completely restored system, please run the installation again.

  Someone know or seen this before, and someone can tell me if there is a simple answer, which key support during the start up or how to fix this?

  Thanks in advance.

  Hello

  As Daniel said in the first assignment by pressing the C button the laptop should boot from the disc. Please press that several times the C immediately after the laptop from.
  Then you can be sure that the option has been enabled.

  The other possibility is to enter the BIOS and then to change the initialization of the order on CD/DVD first

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update

  I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...

• Unable to get the Windows updates. Activation of Windows icon "this copy of Windows is not activated." Cannot be enabled. Please notify.

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark to * address email is removed from the privacy *

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark at * address email is removed from the privacy *.

  Click HERE. Follow the instructions. I recommend to use Guided Help.

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d

• Unable to get the upgrade to Windows 7 purchased to start

  I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

  Unable to get the upgrade to Windows 7 purchased to start

  I call Windows Anytime Upgrade according to the guidelines

  I have Vista 64-bit

  Windows 7 anytime upgrade: you have Vista or XP currently installed?

  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

  You can buy Windows 7 here:

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• vSphere sdk api to get the total memory available for booking of virtual machine

  What vsphere sdk api should I use to get the total memory available to make reservations for virtual machines?

  Here's what I see in the VI client,

  Click on hos-> Configuration:

  Memory

  Physics

  Total xx

  System xx

  VMS 3512,0 MB

  Service xx console

  Now, when I click on the resource allocation tab I see

  3348 MB memory reservation

  Memorey reservation used: 0 MB

  Unreserved memory: 3348 MB

  The question is what value is correct and which are programming API to get all these values (even if it is wrong)?

  If you are familiar with the vSphere API, the easiest way is to browse through the documentation of API reference: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/index.html and/or using the CROWD (object browser), once you explore a bit, you will begin to understand where some properties of what you see on the vSphere Client

  For the configuration of host memory, take a look at: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.host.MemoryManagerSystem.ServiceConsoleReservationInfo.html

  To the memory of VM host accessible to the general public, take a look at: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.ResourceAllocationInfo.html

  To get information "Resource allocation", you must get a reference to the list of local resources for your host: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.ResourcePool.ResourceUsage.html#reservationUsedForVm

  Even if you do not have a "Resource Pool", there is a defect which still exists. This should get your started

  If you use the VI of Java, you can take a look at the VI Java Browser: http://www.doublecloud.org/2010/02/22/vijava-browser-a-great-tool-to-recommend/

  You must also follow Steve Jin blog (author/creator of connections of vSphere Java open source VI)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Installer won't work, indicating that a file may be missing. How to get the installer to run?

  I am running Windows & and downloaded CS6 Master Collection and when I try to run the config file, I get an error indicating that a file is maybe missing and to download and run a couple of potential fixes.  I did, but I have the same error of ge.  I tried only download Photoshop 6 and run this configuration file, but get the same result.  I run other non Adobe without any problem of product configuration files.  What can I do to get the installer to run?

  Move the files to your destop configuration and click "Run as Administrator".

  If this fails, you probably have a corrupt download and should re-download the Installer file.

  For more specific help, attach a screenshot of the error message.

• I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

  I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

  Thank you for your help.  I just downloaded the Photoshop CC2015 for the 7th time and it now seems to work fine.  Sorry to have bothered you... It is good to know that there are people like you who will help if necessary.

  Thanks again.