Unable to get the updates, or use system restore.

Similar Questions

• I'm unable to install the updates on my system

  I'm unable to install the updates on my system. Arte updates installed, but they are not configured properly so changes are returned and the end system day are not up to date please help. Thank you

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Unable to get the parameter by using a controller in the OPS

  Hello!

  I am new to using the OPS and will very much appreciate your help!

  FYI:

  Basically, I need to add 2 descriptive flexfields in a page (by creating a VO) and I need to update the table with the data stored on these de facto forces (I did all the logic already).

  I created a (CO) controller that calls a method that is declared in an application module (AM) that runs a stored procedure (CO and the AM were created by me and that they extend a standard CO and I am).

  Problem:

  However, updated just before... I'm having a problem because I can't get a parameter using paramContext.getParameter("reqHeaderId"). who will help me to identify which line I need to update.

  Because the statement is not capture the value, it returns a null value, and I got the following error when I try to convert it to a number in: oracle.apps.fnd.framework.OAException: java.lang.NumberFormatException: null

  It is really important to mention that, before we get to the page where I clicked the Send button that makes the logic mentioned... There are 2 pages before that where I'm trying to capture the setting and the required parameter is defined on the 1st page. I have been checking each standard CO 3 pages and they use the statement pageContext.putParameter ("reqHeaderId"); to switch between the 3 pages (as far as I know, if not please correct me). On the 3rd and last standard CO that it uses pageContext.getParameter ("reqHeaderId"); to get the value and make another logic.

  So why Im not getting the value if I do the same thing (pageContext.getParameter ("reqHeaderId") ;) on my xxController (which extends the standard co)?

  
  

  Here is the code of the controller:

  public class xxController extends standardController {}

  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processRequest (pageContext, webBean);

  }

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  String str;

  Str = pageContext.getParameter("_FORM_SUBMIT_BUTTON");

  If ((str! = null) & & (str.equals ("SubmitButton")))

  {

  String ReqHeaderId = pageContext.getParameter ("reqHeaderId");

  String ReqLineId = pageContext.getParameter ("reqLindId");

  [Serializable] Parameters = CLIENT1

  {

  ReqHeaderId

  ReqLineId

  pageContext.getParameter ("xxavtBienServicio") //dff

  pageContext.getParameter ("xxavtAttribute3") //dff

  };

  String var = (String) am.invokeMethod ("updateAttributes", parameters CLIENT1);    updateAttributes is the method that converts it to ReqHeaderId number and runs my stored procedure

  }

  }

  }

  Thank you in advance for your help!

  Hello

  I found the reason why I have problems to get the needed values.

  The reason was that the given property has been set to false in order to use pageContext.getParameter must be set to true. So, I went ahead and created as a "value of the form" this way I could put the melted property and keep the hide at the same time field.

  Thanks for your help!

• Unable to get the update on my case

  How can I get an update on my case 0217279450? Opened for four days and I didn't get an answer to.

  
  

  Thank you very much.

  
  

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Re: Unable to get the Satellite L650 for system and inaccessible boot repair

  Computer laptop satellite L650 ~ Windows 7.

  I have problems with the laptop being very slow to start for several months until he was able to start. It took to PC World and they said I had a virus and they had reinstalled the software back to the HDD factory settings. Worked well for a few weeks as falied to start. Restored from Windows recovery option by pressing F8 at startup upward. Worked fine for a few weeks until last week. Repeat the process and works very well.

  Monday, I installed Adobe Photoshop and Tuesday night cell phone has been slow to start up again, so uninstalled Photoshop. Stop it installed some updates of Windows. Last night, when I walk it came with a messgae saying doing xxxxx of the registry changes, and then could not start. Now when I press F8 and select "Repair your computer" Windows starts to load files and then get to the System Recovery Options ~ Select UK keyboard and press next and then I get a window saying: "you must login to access the System Recovery Options. If you havingtrouble connect, contact your administrator for the computer for assistance. Click OK to restart the computer. »

  I did not have this on reinstalls previous and I can't get around it. Help!

  Hello

  In the past, I got several laptop computers several times and this option is still available. Please check follow document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm - Toshiba and you will see that this option is available.

  If you have created a Windows login password you must use it, otherwise leave it blank and just press OK. Don t change same keyboard layout just click on next.

  Please let us know if you've had success with it. E later can discuss how do for faster laptop to start.

• Unable to get the updates of Windows Vista

  Windows Vista search updates does not end.  the last check was 06/12/2015

  Hello

  I propose to run the fixit mentioned in the following article and check:

  https://support.Microsoft.com/en-us/KB/971058

  It will be useful.

• Unable to get the update to work on 3.6.8.

  I gust updated my old imac power current 10.8.2 pc os and can not foxfire to update. Located on the automatic update, nothing happens

  Hello, you can also download the full installation file from getfirefox.com and install it on top of your current installation (bookmark, given personal, etc. should also work correctly with the new version in this way).

  How to download and install Firefox on Mac

• I had to reinstall win. XP and I can not get the updates he used to ativate

  I get a message that says no gin.i mets in ativation # on the back of my laptop

  What is gin?

• Unable to get the windows updates, it returns an error (often 0x8007043c and other similar)

  Original title: can't get windows updates

  I was unable to get the updates of windows - via the feature of automatic update, or through the manual method to access microsoft.com.  When I go to the microsoft update Web site, and it starts to scan my PC, it returns an error (often 0x8007043c and similar).  I tried to run Microsoft FixIt.  It tells me that windows up-to-date devices require to be repaired, but when I run the repair (problem-solving), he continues to run for hours and hours and doesn't do a thing.  How can I remove the software from the Windows Update Agent from my PC and reinstall a new version?

  Hi JosephGPhD,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

   

  Method 2: If the method above does not help then you can see the article mentioned below and check.

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• Unable to get the Windows updates. Activation of Windows icon "this copy of Windows is not activated." Cannot be enabled. Please notify.

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark to * address email is removed from the privacy *

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark at * address email is removed from the privacy *.

  Click HERE. Follow the instructions. I recommend to use Guided Help.

• The system is unable to complete the update of security for Windows XP (KB2661637).

  Original title: update security for Windows XP (KB2661637)

  The system is unable to complete the update of security for Windows XP (KB2661637).  How can I get my system to accept the update?

  Hi Joseph,.

  You receive messages or error codes?

  You can reset the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  You can also try to download the standalone update package and check.

  Update security for Windows XP (KB2661637)

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMo

  Hi, I just bought a used 2012 Pro 13 "Macbook. It came with iMovie installed. However, I would like to get the update to iMovie. He said: I can't update iMovie because a different Apple ID was used to download iMovie and I get errors. How can I update iMovie?

  Error message #1: these applications cannot be accepted by your Apple ID. These applications have already been assigned to another Apple ID, and they will be available in this list of purchases Apple ID. If you don't have access to this Apple ID and would like to receive future updates, you will need to purchase applications.

  Error message #2: update are not available with this Apple ID. This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

  Error message #3: we could not complete your request. There was an error in the App Store. Please try again later. (null)

  Unfortunately, free updates are available to the original purchaser of the computer. The iMovie is locked to his Apple ID, so unless you have to grab his ID, you can buy iMovie.