Unable to get laptop SVZ131A2JL model to recognize the VGP-PRZ20B docking station

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• How can I get Satellite P205D-S8804 to recognize the printer?

  Hello

  I have a Canon S200SPx printer usb and a Toshiba Satellite P205D-S8804 at the Vista and that you get computer to recognize the printer.

  I have already downloaded all the printer drivers for Vista and have USB printer and cable and led all connected, but still computer does not recognize the printer.

  Hello

  I have a USB printer too and my laptop would recognize the printer correctly.
  I had to install the drivers first!
  Then I connected the two devices (laptop & printer) and Windows Vista has reported that a new device has been recognized.
  After a short time the printer appears in the Device Manager

  Maybe you should check if you have installed all necessary drivers
  In addition to renew the USB in Device Manager
  You simply remove the hubs USB and controllers from the list of devices in Device Manager. Reboot the laptop one waiting until Vista recognizes the USB controllers and then install software printing and after new reboot connect the printer!

  The printer must be turned on then

• How can I get my 7 slate to recognize the usb keyboard?

  How can I get my 7 slate to recognize a little matter of keyboard that connects with a usb microphone and no bluetooth? This usb port is useless for what anyone but plugging in the charger? Thank you.

  The Slate7 is not able to connect to an external keyboard via USB.

  It works fine with Bluetooth keyboards.  I use a lot with my Slate7.

  The USB port is loading and connection to a computer for synchronization and file transfer.

  WyreNut

• Unable to get Yahoo as homepage favorite in the Windows XP-based computer after you restore the computer to factory settings.

  Original title: setting up old user account.

  need help please, I use wndows xp service pack 3. This pc is shared with my wife as an account administrator. I come back from pc to the factory settings and all is ok for my account, send everything etc, but on his account, I am unable to get yahoo bt homepage favorite, I am able to do, it's dell page. any help would be appreciated.

  Thank you very much

  Pete

  Hi Pete,.

  1. you receive an error message when you try to change the homepage of Yahoo?

  2. what browser do you use?

  If you use Internet Explorer 7, you can follow this link & check if the problem persists.

  You can't change the home page in Internet Explorer 7

  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  Hope the helps of information.
  Please post back and we do know.

• Cannot get my new office to recognize the second monitor.

  Original title: multiple monitors

  My new desktop running vista computer will not recognize the connection of the DVI cable to my old monitor, who was formerly connected by analog on my laptop. What should I do?  The cables are correct and the correct entry site.

  Try this:
  Right click on the desktop-> graphics options-> output to-> dual display. You can also do it on your graph icon on the Notification area.

• 15 - AS043CL / W2K84UA #ABA: how to move my ssd, unable to get laptop apart.

  Guys, I bought this laptop from costco, it's a customized version, they order HP in bulk, I think. It is 1300 online, but 1,000 in-store.

  Thus, this computer has a

  Intel Core i7 6560u @ 2.20 GHz

  16 GB ram ddr3

  256 GB SSD Samsung NVME Mzvlv256

  15.6 screen resolution inch 4 k

  I'm just learning the difference on an SSD 2.5 and the new M2 passing through the pci.

  If I'm technically challenged air it's because I am. I need help to know how to get down the lower lid too. It has only 6 screws. and stands in the lower part, not from the top with the keys. I wanted to see if there was another space for one SSD as 256 GB is not enough when I have 5 TB of music and videos on external hard drives in digital Western waiting.

  I think not this laptop anywhere online, or anything close to it. It resembles a plu spectrum x 360. It's a phone envy. The name of the product is exactly what it says on the box.

  Can I put an evo to samsung SSD 2.5 here? There's no drive of CDs. thank you. and how do I open this thing? I could only open half of the coverage.

  Hello

  I think there more than 6 screws. Please visit the page #26 of the following guide:

  http://h10032.www1.HP.com/CTG/manual/c05128309.PDF

  Kind regards.

• VAIO SVE1712W1EB laptop computer does not recognize the SD card reader. (Win 8 Pro)

  My Sony laptop doesn't recognize not his slot for SD card.
  He worked after the upgrade to Windows 8 Pro with Media Center. Later, after several months, he has stopped working.

  I think it's compatible SDA Standard SD Host Controller.
  Hardware ID: PCI VEN_1180 & dev_0822 & subsys_833810f7.

  I also installed the upate: KB2862768. But that changed nothing.

  Any help appreciated.
  

  You can run system restore to restore your computer from the date when it was working again and see if that would make a difference.

  We kindly recommend you to visit our global website of Sony for more information contact the Sony Support Center in your area to http://www.sony-europe.com/pages/europe/sony_europe.html for your model computer.

  If my post answered your question, please mark it as "accept as a Solution.

• Computer Asus laptop has ceased to recognize the external hard drive Hitachi

  The external hard drive was working ceased to be recognized. I troubleshoot-conducted pilot issues, usb port, System Restore... nothing I've tried has worked. Suggestions?

  Hello Hunter.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the model number of your PC Asus laptop?
  2. you made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted USB controllers or device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Uninstall and reinstall the USB controllers and check the issue. Please follow these steps:

  a. press Windows + X keys and click on Device Manager.
  b. develop a 'USB Bus controllers'. Right click on a device, and then click Uninstall. Please repeat this step for each device.
  c. once it's done, restart your computer.

  All USB controllers will automatically install.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Unable to get netflix to stream.  Just the data had emigrated from my old macbook.

  Hello

  I just had data migrated from old Macbook to the new macbook air.

  I can't figure out how to get my Netflix to stream.  I wonder to use silverlight.  is that correct?

  Thank you

  The following Mac Netflix tab can help: https://help.netflix.com/en/node/225

• Unable to get power and volume icon on the taskbar.

  I lost my volume and power icon taskbar (they were there).  When I go to the area 'Turn icons on and outside', these two are dimmed and it wont let me turn on them (Windows 7).  I don't have hidden them... what should I do?

  Hi tominkc

   

  You can use the steps below and the check is these help-

  a. right click on a zone empty of the taskbar, and then click Properties.

  (b) in the Notification area, click Customize.

  c. for the icon of power and volume, select Show icon and notifications. The icon remains visible in the taskbar in the notification area, and notifications are displayed.

  d. click OK.

  Also see the help link below-

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

   

  I hope this helps.

• I am unable to get ios mobile to connect to the Office Server, what can I do?

  The number of the server is the same on mobile than on approx. desktop Mobile application gives an error message stating cannot download archive server. What can I do to fix this?

  I assume you mean the developer app PhoneGap and the desktop PhoneGap app?

  If so:

  • Your device must be connected to the same network as your development computer.
  • Make sure that the versions of the PGDevApp and PGDesktopApp are up to date.
  • Try with a freshly created project - if it works, something can be upward with your particular project.
  • Add ports that pgdesktopapp uses to your firewall settings so that data can flow freely. You can temporarily disable your firewall to see if that's the problem.
  • You may need to add an exception to your antivirus software. Again, you can temporarily disable the AV to see if it is causing your problem.

• Aurora R1 do not recognize the internal drive of 6 TB

  I am unable to get my Aurora R1 to recognize the full capacity of an internal hard drive from 6 to.  Reading the forums, it seems that this could be possible by making a "data disc" in the GPT format.  I have to format GPT to see even less available 2 TB.  How can I make my drive a "data disc" such that I can use the complete 6 TB?  I am using Windows 7 64 bit, i7 930 & Bios A11.

  For some reason, I thought you already had the latest version of Intel-RST.

  Yes, by all means... update to the latest version... run the latest version or run without him completely.

  If you go to the screen "Version", and it's called something like "Intel rapid storage technology" then that's what you want:

  File name: SetupRST.exe
  Version: 13.2.4.1000 (latest)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24293&lang=eng&ProdId=2101

  However, if it's called rest or you see the word Enterprise, you need a different version (for easy upgrade).

  Just a reminder... save your C: drive before playing with Intel RST. Things can go bad pretty fast. On the desktop, I use SSD instead of RAIDs and try NOT to use Intel-SLI at all.

  Since it is already there, and you can't really uninstall it, so update it and see what happens. It would be interesting if she finally got a goal on systems non-raided. Try this before you try the DiscWizard (and eventual insertion of pilot Acronis).

  I've always had this opinion of Intel-SLI. However, I found this on a knowledgeable Pro (in terms of HARD/NAS/RAID drive) post on the forum:

  Benefits of the TSRI software installation:
  1 AHCI and RAID: followed by some details about the readers, who are related to the resp. Intel SATA AHCI RAID controller

  2. only RAID: creation, repair and modification of a RAID array in BONE

  3. only RAID: activating the feature 'Write Back Caching' (help from the performance of writing in RAID mode)

  Disadvantages of the TSRI software installation:

  1. the extension of the start date

  2. other demand for resources (the TSRI Service usually runs permanently in the background)

  3 possible increase of the instability of the system (some versions of software TSRI have serious bugs)

• How can I get Firefox 21.0 to recognize plugins that work perfectly in Firefox 20.0.1?

  I just upgraded to 21,0 Firefox on my Solaris 10 system. (I know, it's not supported - sue me.) I've reproduced the plugins of my installation of Firefox 20.0.1 directory. All the plugins appear in the add-on Manager and work properly, in 20.0.1, Firefox but Firefox 21.0 tells me "you do not have additional modules of this type installed. How to get Firefox 21.0 to recognize the plugins installed? Thank you.

  If you copied the plugins in the plugins folder in the Firefox program folder then you should move the files in this folder to the folder browser (browser/plugins) to make Firefox to find them.

  • http://www.gHacks.NET/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-Firefox-21/
  • http://Mike.kaply.com/2013/04/24/major-changes-coming-in-Firefox-21/

• my computer dell laptop with windows vista does not recognize the battery what should I do?

  I have a computer dell laptop which will not recognize the battery what should I do?

  Contact Dell for hardware support.