Unable to install Autocad 2000

Similar Questions

• Unable to install audio drivers for Satellite 3005-S303

  Unable to install audio drivers for Satellite 3005 - S303, Windows XP SP2 installation of the Realtek AC97 drivers automatically, but with the error (blue screen). I tried to install the drivers of Crystal or Cirrus but Windows always changed for Realtek.

  Hello

  I found information on the net that this device supports a Crystal CS4299-A Codec chip.
  In this case, it should be possible to use the Crystal audio driver.
  As far as I know that he is an American unit. I searched the site of driver Toshiba us and have found a Crystal audio driver but only for Windows 98SE/Me/2000.
  If you have found the right driver, so I recommend you to remove first the driver of his former (Device Manager), then install the new.

  Here you can compare as you installed the BIOS with BIOS which is available on the site we Tosh.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Unable to install audio drivers, MS uaa hd audio needs

  Unable to install audio drivers, MS uaa hd audio needs... I have dl'ed several different versions of the uaa, but none of them allows the continuation of the audio driver installation

  Hello Mr NoseDevoidoffunk,

  Follow the steps in the article.

  Class of Universal Audio Architecture (UAA) High Definition Audio driver available for Windows Server 2003, Windows XP, and Windows 2000

  http://support.Microsoft.com/kb/835221

  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000

  http://support.Microsoft.com/kb/888111

• How to install AutoCad Lite 98 on a Windows 7 computer?

  I used AutoCad LT98 and AutoCad LT2000 on Windows 98, 2000, ME and XP computers since 1998

  When I try to install it on this computer Windows 7, I get a message that it is not compatible.

  How to install AutoCad Lite 98 on a Windows 7 computer?

  * original title - program compatibility problem *.

  You did not mention which version of Windows 7, but if you have Professional or higher, you could try XP Mode:
    
   
  Download Windows XP Mode with Virtual PC
   http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
    
   
  Windows XP mode - installation and configuration
   http://www.SevenForums.com/tutorials/8247-Windows-XP-mode-install-Setup.html

  FYI: XP Mode running XP 32 - bit regardless of the bit-version of your host Windows 7 (32-bit or 64-bit).

• Error code 2738 on installing autocad 2013. Any ideas?

  I am trying to install an autocad 2013 I downloaded from autodesk and unable to install as shown in the error code 2738.  Any ideas?

  Hi Roshnur,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Autocad 2013 with error Code 2738. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Check if the program is compatible in the Windows 7 Compatibility Center.

  Compatibility Center:

   

  http://www.Microsoft.com/en-us/Windows/compatibility/Win7/CompatCenter/home

   

   

  If it is not compatible, then install the program in compatible mode of the link below and check the issue.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more information:

   

  Contact Autodesk Support:

  http://USA.Autodesk.com/support/

   

  Autodesk community:

  http://USA.Autodesk.com/ADSK/servlet/index?ID=7460177&siteid=123112

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• I'm unable to install 31.1.2/Windows 7 64-bit Thunderbird lightning calendar

  I'm unable to install 32.0.3/Windows 7 64-bit Thunderbird lightning calendar.
  My original calendar disappeared earlier during an update.
  I tried to download lightning - 3.3.sm+ CT - windows.xpi, but every time I try to run it, it only adds the file as an attachment to a new email.
  Can you help me please?

  Problem has now been solved by another thread.
  Apparently, you will need to use the 'Speed' icon to install it. I didn't know the machine had nothing to do with him, but have used I am now running.
  A big thank you to all.

• How to install Windows 2000 on Equium A200-1VO?

  Hello

  Can someone help me?

  I would like to install Windows 2000 on the Toshiba Equium A200-1VO laptop, but I need the drivers to do this.
  I have tried the Toshiba web page but cannot find the drivers.

  Can someone please?

  Thank you

  You will not be the drivers because this Vista designed for laptop is not supported by this old operating system. Maybe you can find the drivers for Windows XP Home edition, but not for W2000.

  All you can do is search for the drivers on the net and hope you have success with it.
  I don't know why you would do this, but perhaps you should accept that at some point Toshiba must say stop and don't waste time with the support of the older operating system. I also believe that 0.01% people want to use this old operating system on new generation laptops.

  There is no sense to make support for W2000. What do you think about this?

• Cannot install Windows 2000 on SatPro 4600

  Hello

  I have a SatPro 4600, earlier, I got ACPI Bios error when you try to start Windows.

  Is it possible to disable ACPI in the Bios, I couldn't find any option in ACPI Bios 2.60 to turn it off.

  The I formatted the hard drive and try to install Windows 2000 from scratch. But for Setup is copying files to start the installation program, it comes up with an error message.
  "Setup cannot copy the file"File_name"

  And will not let me continue with the Setup program.

  Help, please.

  Hello

  I can't help you much about it, but maybe this article can help you. Check http://support.microsoft.com/kb/319344/en-us

  Good luck!

• Re: I am unable to install a new usb modem

  I'm trying to uninstall a usb modem inorder to install a new. I'm unable to uninstall and get the following error when you try to uninstall:

  SetupDLL/SetupDLL.cpp (469)
  Broadband Mobile PAPP: 3
  PVENDOR:3 Mobile (#ID_STRING_COMPANY_LINK #)
  PGUID:3EAAC5FD - E 209-4856-8 C 49-D4EA40F85032
  $10.50.0.125

  @Windows service Pack 2 (6002) IE.8.0.6001.18975.

  I'm unable to install a new modem usb I get an error message saying I don't have permission

  I would be grateful for any help

  Hello

  Don t know what modem you have and need this modem but I recommend checking that my modem manufacturer supplied installation instructions.
  You should also visit the modem manufacturer for more information about the new software, installation or updates

  PS; usually, you can uninstall the software installed in the Panel-> Add & Remove software.

  Otherwise, I recommend tool called CCleaner. It cleans the operating system, the registry and it s useful to remove the software from the HARD drive.

• Satellite M30X partition drive to install Win 2000 and XP

  I have partitioned my disk with Partition magic, and when I try and install Windows 2000 as a new OS I get an error message during the installation:

  SETUP: 0 X 00000050 (0XF265C, 0X00000000, 0XBFF97874, 0X0)
  IPF in nonpaged area

  I installed the new bios on the Toshiba site, but nothing helped. Any ideas?

  Thank you

  Hello

  changed your hardware components like RAM or HARD drive? Before installing a new system they must be removed!

  If this does not work, you can try to partition your HARD drive with fdisk to W2k installation configuration!

  Maybe this will solve the problem of th!

  Bye Bob

• 3440 CT Poertege: install Win 2000 without floppy

  I have an old protégé 3440CT but I don't have the external disk, I only have the external cd-rom drive.
  When I bought the computer second hand, it installed windows Millennium Edition and I decided to install windows 2000.

  Because I don't have an external floppy drive, I decided to go down the internal disk (hard drive), put in a usb adapter and connect it to my desktop pc. I formatted the drive and created a partition where I copy all installation windows 2000 cd.

  But when I put the hard drive again in the protégé and restart the computer, the disc starts, it was not allow to restart. And appeared an insert saying message the disk in the drive.

  I just want to know if its possible to install the win2000 in my portege make a copy of the installation cd on a partition on the hard drive, and if not, how can I install it in my protected?

  Hello

  I think you need to start Notepad using the floppy drive and boot disk. When start I presume you can access second partition and run the installation procedure. I didn t try before but in my opinion, it should be possible. Some users on this forum have reported on this possibility.

  If know you more please let me know.

• Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.

  Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.
  After that I updated to 3.6, FF4 to see any of my previous modules.
  When you try to install the new, I see no error dialog box or message, just install bar is not going anywhere.

  To anyone out there yet with this issue.
  The solution that worked for me was to create a new user profile.
  Give it a try, if it works you can just move your settings and other things more.
  Oli

• How to install Win 2000 form a USB CD on a protected 3440CT

  I have a 3440CT protected and are in need of repair/install Windows 2000 on a CD. I have the 4 game Win2k boot disk and can boot from USB FDD. The CD player is also a USB port that is connected via the port replicator, but he never saw also available.

  What I need to do to be able to see the CD drive for installation of windows?

  Any help much appreciated.

  Sam.

  Hello Sam

  I have never done this, but I assume that you need DOS driver for the external hard drive. You must start the unit by using the startup disk, install the correct driver, and after that, I think that you will be bale to use external player of ODD.

  Please check that a little this Portege category and you will find a lot, but really a lot of topics with the same theme and a lot of interesting observations and proposals how to proceed.

• Re: IMPORTANT - how to install Windows 2000 on a Satellite L300 - 16 M (PSLB0E)?

  Hello

  I am an independent developer and absolutely need to install multiple operating systems on my * Satellite L300 - 16 M (PSLB0E) *: it is very important for me because I need to check the functioning of the software under each environment for real (not not using solutions like VMware, for example).

  Well, then, right now, I did a backup Acronis image of original full HDD, and then deleted the original scores of WinRE and data, reduced and moved from disk to the partition of Vista... and installed System Commander 8 to prepare my future multi - initialize. For the moment, everything sounds right: Vista works perfectly!

  Also note, I have configured the SATA in the BIOS Setup in "Compatibility" mode just because I don't need AHCI in my type of use!

  Second step: now, * I have to install Windows 2000 Pro (SP4) EN *. Of course, I am aware that the sticking point is the SATA/AHCI driver, which is not present in the CD of Win 2 K... So, I just make a new CD integrating these drivers using nLite; now, I tried using the driver Intel site on Intel 82801 HEM / HBM SATA AHCI controller (ICH8M) and page drivers Toshiba XP.

  But it does not completely: the Win 2 K install begins... All the drivers are well charged (including the ones AHCI) and just after this stage of loading, I get a black screen with just a blink of an eye cursor at the top left of the screen... indefinitively :-(

  I tried also to SATA mode "AHCI" in the BIOS and it's the same thing.

  So, what to do next?

  I used the wrong AHCI drivers? Do I need to integrate as many drivers Toshiba (about chipset, display, sound) in the installation of Windows 2000 using nLite CD? I mean the capacity of the CD is not reached.

  Is there a way or a tutorial to install Windows 2000 somewhere? For XP, I think it will be easier because SP3 seems to support AHCI, but earlier, my problem is to install Windows 2000: Although Microsoft wants to leave-it, there are many professionals who still use-it... And my work as a developer, is to make my software also works on this OS! * I really need to find a way to install it on this computer! *

  Awaiting your response informed and all the tips or idea that could help me to complete the task.
  In a word: HELP! Oops!

  Post edited by: eanon

  > No I used the wrong AHCI drivers?
  Perhaps.

  As far as I know that you need the crib Intel Matrix Storage and in this package, you will find the SATA drivers.
  http://www.Intel.com/support/chipsets/IMSM/index.htm

  There you have to choose to get the latest driver - version PV-> Win 2000 8.5-> there you must take the package from point 3

  Good luck