vRealize device Orchestrator 6.0.3 and vCenter 5.5 5.6 U3/vCloud Director

Similar Questions

• vCloud Director 5.5 device - limits

  Hi all

  Is there any vmware document that specifies the boundaries of the vCloud Director 5.5 device? I know it is trial / PoC and should not be used in a Production Env, but I am interested in a CEP more complex and has been reading here: the vCloud Director unit. VMware vSphere Blog - VMware Blogs limitations:

  Now the vCloud Director device it has some limitations.  As it is only intended for vCloud Director assessments, the scale of the deployment is limited to:

  • A cell of vCloud Director
  • Two vCenter servers
  • 10 VDC organization
  • 100 virtual machines
  • Up to 11 GB of information stored in the database shipped

  Being a former link, I'm sure that is more up-to-date and these limitations have increased, but would like to find something about it.

  I know it supports CentOS, but unfortunately in this PoC I do not have a Windows Server (will also use the vCenter device) and any database.

  Thanks in advance for any comments.

  We produce is no longer the device.  One of the limitations would be so you don't have updates for it.  The limits are generally the same as what you posted.

  CentOS support any really, since the device is produced as a black box.  SuSE or CentOS according to what version it is.  The embedded DB have size limits.

  If you do a CEP more complex, I suggest to use the BIN on CentOS Installer and have at least 2 vCloud Director of cells in a load balanced configuration.  Several cells is something you just can't do with the device.

• How device Orchestrator properly resolve its host name and IP address?

  Hello.

  Someone knows how to make good DNS resolution for device Orchestrator in order to solve its own (full FQDN) host name and IP address according to DNS records?

  The problem is with the methods "System.resolveIpAddress ()" and "System.resolveHostName ()".

  The 'resolveIpAddress()' method returns the same so called IP with static IP address assigned to this device. And returns the domain the host's FULL name when it is called with 127.0.0.1.

  So when I call "System.resolveIpAddress ('192.168.1.50')", it returns "192.168.1.50" instead of FULL domain name.

  When I call "System.resolveIpAddress ('127.0.0.1')", it returns "vco.local.lan".

  The 'resolveHostName()' method returns 127.0.0.1 when it is called with FULL domain name or host name.

  When I call 'System.resolveHostName ('vco.local.lan')' or '('vco') System.resolveHostName' it returns 127.0.0.1 in both cases.

  utility 'nslookup' launched from the console device even work properly return FQDN by entering the IP and the return of the appropriate IP (192.168.1.50) when you enter the FULL domain name.

  Thank you.

  SSH to your device or access to the console and log in as root...

  Then, edit your file/etc/hosts

  -Remove any mention of your domain name FULL and hostname in there, the only things you'll want to go in the sense of:

  127.0.0.1 localhost

  Possibly restart the network service (perhaps not necessary, I did it on my own)

  After doing this, my phone began to show the fqdn when I chose the correct IP address in the configuration.

• I7 2600 k P8H67-i Deluxe MB and vCenter Server ESXi 5 appliance

  I7 2600 k P8H67-i Deluxe MB and vCenter Server, 16 GB, and ESXi 5 device

  One has been able to run vCenter Server Appliance on this material?

  vCenter Server Appliance does not start

  I run ESXi 4.1 on a server and more office built a user-friendly machine for ESXi 5

  ESXi 5 start ok, installs and runs a test VM ok.

  But after downloading appliance vCenter server and deployed the ovf, the virtual machine will not start.

  I'm reasonably confident that the deployment was OK, as I've done it before on ESXi 4.1 (but on a server with Xeon processor).

  The message of the console is

  
  Message of the Virtual Machine
  This virtual machine is configured for 64-bit operating systems. However, 64-bit
  operation is not possible.
  Longmode is disabled for this virtual machine
  For more information, see http://vmware.com/info?id=52
  Continue without 64 bit support

  Yes

  NO.

  If I select 'No', I get 'not enough video RAM.

  If I check the box 'Yes' I get

  This kernel requires an x 86-64 processor but only detected an i686 CPU.
  Could not start - please use a kernel suitable for your CPU.

  I've been through settings and advice re longmode, but just can't get the right settings.

  Thanks in advance for any response

  In order to run the 64-bit clients, you need to enable 'VT - x' in the system BIOS. In addition to this I also recommend you activate "Execute Disable Bit" and - if necessary - disable "VT - d" as well as "Trusted Execution". Once done, save the BIOS settings and the power of the system (power power off) cycle. If this does not resolve the problem, thanks for posting the latest vmware.log of the virtual machine.

  André

• 4.1 and vCenter ESX only allows to use 1 Fibre Channel LUNS

  Hello

  I have 8 blades ESX 4.1 (build 348481) in a Cisco UCS 5108 chassis. Each blade has 2 x HBAs available. I also have a fiber channel storage array that is configured to provide 2 1.8 to LUN (for now and in the future).

  When I go in vCenter and select one of the ESX servers under "Configuration"-> "Storage adapters"-> "Rescan all...» "each server detects the table (and several paths towards it) but only shows a single available LUNS (LUN 0) when 2 LUNS should be available (LUNS 0 and 1 logical unit number). See the image below.

  

  Now, the thing that confuses me is that when I get on the command-line of the ESX via SSH server and run "esxcfg-mpath - b", I see a list of all the paths including the paths to the LUNS 0 and 1 logical unit number (see output below). Any ideas on why ESX and vCenter authorizes me to LUN 1?

  esxcfg-mpath - b:

  NAA.600508e0000000001e10a036bc3f5601: FREE Serial Attached SCSI Disk (naa.600508e0000000001e10a036bc3f5601)
  vmhba0:C1:t0:l0 LUN:0 Status: active sas adapter: 5c84c75ed0910000 target: 1563fbc36a0101e

  MPX.vmhba32:C0:t0:l0: Local USB CD-ROM (mpx.vmhba32:C0:T0:L0)
  vmhba32:C0:t0:l0 LUN:0 Status: Active Local HBA vmhba32 channel target 0 0

  EUI.706f636c6162766f: disc SCST_FIO Fibre Channel (eui.706f636c6162766f)
  vmhba2:C0:T1:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f2 WWPN: 21:00:00:24: ff: 32:10:f2
  vmhba2:C0:T1:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f2 WWPN: 21:00:00:24: ff: 32:10:f2
  vmhba1:C0:t0:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c2 WWPN: 21:00:00:24: ff: 32:45:c2
  vmhba1:C0:t0:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c2 WWPN: 21:00:00:24: ff: 32:45:c2
  vmhba1:C0:T1:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c3 WWPN: 21:00:00:24: ff: 32:45:c3
  vmhba1:C0:T1:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c3 WWPN: 21:00:00:24: ff: 32:45:c3
  vmhba2:C0:t0:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f3 WWPN: 21:00:00:24: ff: 32:10:f3
  vmhba2:C0:t0:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f3 WWPN: 21:00:00:24: ff: 32:10:f3

  MPX.vmhba32:C0:t0:L1: USB Direct-access locally (mpx.vmhba32:C0:T0:L1)
  vmhba32:C0:t0:L1 LUN:1 status: Active Local HBA vmhba32 channel target 0 0

  MPX.vmhba32:C0:t0:L2: USB Direct-access locally (mpx.vmhba32:C0:T0:L2)
  vmhba32:C0:t0:L2 LUN:2 status: Active Local HBA vmhba32 channel target 0 0

  Its because the table shows two LUNS have the same value of ID of Page 83, ESX both think you have 2 paths to the same LUN.  Paths multiple ESX driver uses the value of the ID of Page 83 to determine if 2 LUNS are the same device.

  It was a problem with that code, that it resembles yours-based Solaris beginning according to the tables and other tables that used code based on Solaris pre-COMSTAR, as well as tables that use SCWIST.

  There is really nothing you can do about it, because it is a bug in the software of the array (it shouldn't be exporting 2 LUNS different with the same ID value of Page 83 - it is a violation of the standard).

• vCO and vCenter Linked Mode

  Hello!

  are there problems to wait when connecting vCO to a vCenter which is in bound mode?

  Thank you!

  see you soon,

  Joerg

  Hello

  with the exception of the limitations known to vCenter Server and vCenter Orchestrator, I think that there are no problems with this solution. You will need a vCO by vCenter Server instance in enterprise environments. In smaller environments, you can connect several Server vCenter vCenter Orchestrator.

  Best regards

  Christian

• Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Nobody here can help, and Apple will not help you to overcome the blocking of activation.  If the seller does not cooperate and remove the unit from their iCloud account, then you will never be able to use this device yourself.

  See disable find my iPhone Activation Lock - Apple Support

• I get message "USB device not recognized", but two USB devices are actually works very well. Poster sometimes Device Manager 'unknown device', then it will disappear and reappear.

  Poster sometimes Device Manager 'unknown device', then it will disappear and reappear with the error message.  Sometimes, I see the message even when there is nothing in the USB port.

  Hi malsnano,

  I see that usb devices do not work on xp. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to these usb devices?

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  M odes 2:

  Put the computer in a clean boot state, then check if that helps.

  How to solve the problem by performing a clean boot state:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in step 3: to reset the computer as usual.

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart the computer and Windows XP will automatically reinstall all USB controllers.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Error message: device is ready for use, and after a few minutes the error message "hardware Id missing.

  Original title: hardware Id missing

  I recently acquired a voice recorder HccToo 8 GB. However, whenever I connect it to my computer I get a message saying that the device is ready to use and after a few minutes the error message "hardware Id missing.
  The usb cable that connects to the camera has no problem (and should be universal). And I tried to connect to other computers on win 7 with the same results. I also watched online solutions, but this problem seems to apply mainly to phones.

  I would be grateful for any advice on what I can do about it.

  Hi Nikolai,

  Sorry for the late reply.

  Did you try to connect other USB devices and check the issue?

  If problem persists, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• During the scan, I get this error "'there are no installed TWAIN compatible device." Please install one and try again. »

  Original title: scanner problem

  I get this error - "there are no installed TWAIN compatible device. Please install one and try again. "- When I try to scan a document using the utility Windows 7 Scan (hppscan7.exe) and a printer HP Color laserjet CM1312nfi. I tried to reinstall the printer driver and software.  I have a laptop HP G71-340US running under WIndows 7 64-bit.  Service Pack 1 is installed, and all windows updates are up-to-date.  I hope that someone out there has a solution for me!

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter of material and check if that helps.

  Open utility troubleshooting hardware and devices:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Temporarily disable the security software and check if it helps.

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Run the HP scan Diagnostic Utility and check if it helps.

  HP scan Diagnostic Utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=en&docName=c02114802&LC=en&product=3418707

  Hope the information is useful.

• BlackBerry classic to synchronize Contacts and calendar on 3 devices (BlackBerry Classic, PRO Surface and a laptop)

  Hello

  I have a classic BlackBerry. I try to sync my contacts and Calendar Details on 3 devices, my BB, Surface PRO and my laptop using the Link BlackBerry software. I use Microsoft Outlook on my laptop and the Surface where I synchronize from. When I connect my BB to my laptop, can I synchronize all the contacts created on my BB for the laptop and the contacts created on the laptop for my BB, even with the calendar, calendar events created on the BB will be synchronized on the laptop and vice versa. When I connect my BB to my Surface, I can do the same thing there, sync contacts & calendar events created on the SURFACE Pro for the BB and vice versa.

  What I'm looking for, it's that all contacts & calendar events created on my Pro SURFACE which have been synchronized on my BB must also be synchronized on my laptop when I connect my BB to my laptop and vice versa, as any event or the contacts created on my laptop that have been synchronized on my BB must then be synchronized on the Surface PRO Microsoft Outlook. So I try to reach that 3 of all devices must have the same calendar and contacts whenever I connect my BB device (Surface & laptop) to synchronize with the BB link.

  I would appreciate a response from anyone.

  Thank you

  Hello and welcome to the community!

  Rather than captive link, I recommend you go to OTA sync... see:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/how-to-OTA-sync-BB10-and-non...

  Using this method, I have my email, calendar and contacts sync all 3 SmartPhones BB, 1 BB PlayBook, 1 Windows/Outlook2013 system, and a MAC (although, by introducing the MAC and it's limits, I had to implement a hybrid solution... email from HotMail, but the calendar/contacts via Google). I don't know any way to do what you want to link (and it would be more instant OTA anyway and let it do everything remotely rather than purely local).

  Good luck!

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• When I try to view my devices to Control Panel/hardware and Sound/devices and printers, he treats forever and does not show the devices.

  When I try to view my devices to Control Panel/hardware and Sound/devices and printers.  It treats forever and does not show the devices.  I need help!

  
  Original title: device and Printers window
  There could be various reasons why the window devices and printers stalls. All the control points are listed here.
  Fix devices and printers folder is completely empty in Windows 7

• Want to take the certification VCP6-VTC, but I finished the 5.5 ESXi and vCenter Server 5.5

  Hello

  2 years ago I had the training for 5.5 ESXi and vCenter Server 5.5 - I wonder if that would satisfy the requirement and allows me to pass the exam VCP6-VTC?  Or should I stick with the VTC VCDP5 only?

  Have you taken after school.

  5.5 vSphere install, configure and manage.

  If so, please attend vSphere: what's new [5.5 to 6.0]

  It is a 2 day course that will allow you to take the exam VCP6-VTC.

  Otherwise, take VCP550 review and upgrade to VCP6-VTC in taking 2V0 - 621D.

  Pleaes see following URLs too.

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www_cert&TRK=profile_certification_title

  VCP6-VTC Certification

• The traffic between a host ESXi and vCenter Server is secure?

  Dear team,

  You pray let me know is traffic between a host ESXi and vCenter server (vice versa) is secure?

  The VC and ESXi version is 5.1U1a

  concerning

  Mr. VMware

  Default SSL certificates are installed automatically. However, you can configure the third-party SSL certificates to make the environment more secure.

  Please see:

  VSphere Documentation Centre

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Security-Guide.PDF