Cannot create a subscription to notifications vCloud Director (Server.setCustomProperty routine-cursor)

Similar Questions

• Cannot create the keystore and SSL certs Director host

  Hello group,

  I'm standing, a laboratory director.  I have ESXi host with vCenter data center far away at the square.  When I try to configure the host of the Director (RHEL5 - completely up to date) I'm unable to create a self signed cert.  I am running this command, copied directly from the 'Cloud master and Guide of Installation Configuration', page 19

  keytool - keystore certificates.ks stores - JCEKS - storepass passwd - genkey - keyalg RSA-
  http alias

  I get the error unrecognized command:-keystore

  If I mix autour settings a bit and put the command - genkey first I invite myself to enter the fully qualified domain name, but as soon as I enter the FULL domain name I am presented with an error on the JCEKS stores.

  I'm under java version 1.4.2 on an install RHEL5 completely up to date.

  Any ideas would be greatly appreciated.

  Thank you!

  You must use a copy of the utility keytool taking support Java 5 or Java 6. 1.4.x and older don't work not (any more than the utility keytool GCJ). The simplest solution is to use the copy provided by vCD: / opt/vmware/vcloud-director/jre/bin/keytool

  You must use the absolute path or remove the existing Java runtime system and set the appropriate PATH environment variable.

• Cannot delete the storage policy to vCloud Director 5.5

  I'm trying to delete the storage policy to vCloud Director 5.5. I did in several vCloud Director organization VDC but stuck with one on the same instance of vCloud Director. I migrated all the VMs, the media and the VAPP model to another storage strategy. I checked in vCenter as there is no VMs who belong to this policy. Always in the vCloud Director, I see 30MB "asked" to this strategy of storage for this VDC.

  Any ideas what I need to check? How can I find what always uses this storage strategy?

  The problem has been resolved. Failed ISO image was only visilble in Administration and media & other only. After it has been removed, we were able to delete the storage policy.

• Cannot create the vCloud Director VDC

  Hi all

  Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.

  Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance.  Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)

  Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

  
  

  " In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.

  I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.

  also attached the logs in the images below.

  I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.

  Any help to point me in the right direction will be appreciated.

  I will be happy to provide you with newspapers if necessary.

  Thank you

  Ibrahim

  I was not talking about data warehouses.  I refer to the view in the vSphere Client.

  Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

  In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

  This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

  vCloud produces an error because of something that happens in vCenter.

• Nested VApps in vcloud Director

  Is it possible to create the vapps nested within vcloud Director?

  Nesting vapps won't happen in vCD.  They will be parallel vApps.  Is not stop you from writing a tool/site Web automation, which would show you have there.

  vRA will address finally that, but they do not use vApps.  all virtual machines just became machines to manage without the concept of being part of a paralytic.  It will be that you have a plan of several computers that uses two other plans several computers (a DB level on the application layer).

• Cannot create vApps in vCloud Director 5.1

  I am unable to create a new TIME in my organization. When I login in the vCloud Director URL Org I don't see an option to import virtual machines from the vcenter server. If I am trying to build a new TIME I get an error message "you can add a new TIME because there is no available in this organization CDV. Contact your system administrator. I defined the pVDC and Org VDC and two of them have checked green.

  Any ideas?

  Just a quick info, the problem is resolved.

• Cannot access vCloud Director VM console

  Hello

  We´re in the face of a very strange problem when you try to access a console virtual machine via the vCloud Director 5.6 Web Portal.

  Let me describe the environment:

  1 - 2 vCloud Director cells;

  2. load balancer 1;

  3 - 1 VIP for the proxy console; 1 VIP for the web portal;

  4 - certificate of CA-signed 1 with wildcard characters (*. < domain >) instead of certificates 2 ordinary host (http. < domain > and consoleproxy. < domain >).

  5 - the following procedure was used to create the keystore of Java and to be able to import the certificate even twice (each time with a different alias):

  OpenSSL pkcs12 - in /keystore/ < company > .pfx-out /keystore/ < company > .pem

  OpenSSL pkcs12-export - in /keystore/ < company > .pem-inkey /keystore/ < company > .key-out _http.p12 /keystore/ < company > - name "http".

  OpenSSL pkcs12-export - in /keystore/ < company > .pem-inkey /keystore/ < company > .key-out _console.p12 /keystore/ < company > - name 'consoleproxy '.

  keytool - v - importkeystore - srckeystore /keystore/ < company > _console.p12 - srcstoretype PKCS12 - destkeystore /keystore/ < company > .ks - deststoretype JCEKS

  keytool - v - importkeystore - srckeystore /keystore/ < company > _http.p12 - srcstoretype PKCS12 - destkeystore /keystore/ < company > .ks - deststoretype JCEKS

  6 race "keytool-list - keystore /keystore/ < company > .ks - stores JCEKS" shows two aliases in the keystore.

  7 - vCD installer not to complaint about it.

  8 - certificate is loaded correctly when accessing the web portal

  Now the question:

  1 - the gate opens as it should;

  2. each type of action is possible and works very well;

  3. when we open a VM console for the first time, it opens normally;

  4. If we close it and try to reopen, or if we try to open a second console, it won´t open;

  5 - according to the browser:

  5.1 - console remains black. State begins to 'connection '. Changes to "Offline" after a short time;

  5.2 - console remains empty. Status hangs on "Loading"; He sometimes goes to "disconnected";

  6. If restart us the two cells, it begins around (able to open the first console, cannot open the rest);

  7. same behavior if the access using the VIP (with load balancing) or directly (using the internal IP address of cells).

  I ve seen some issues with what seemed like the same problem but no conclusive answer.

  Any help on this would be appreciated.

  Thank you very much.

  The fixed.

  1 - upgrade of vCD 5.6.3 to 5.6.4.

  2 - something with virtual machines, we had deployed for testing. We have erased their and the new have no behavior.

• vCloud Director cannot deploy VAPP sysprep to error

  I had errors with WinServer 2003 deployment in our test environment, I didn't know that I had missed the sysprep package. Now, I have installed the package of sysprep by KB Article: 1026313 I downloaded the files on the Microsoft site and they etc. extracted then moved in the vCloud linux host. Now I get a new error:

  Internal server error
  -Cannot start VAPP "vApp_administrator_9."
  -Unable to start virtual machines in the pool of resources '0047960730-InternDevvDC '.
  -NFC HTTP error. Cannot deploy the package from /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab to 0728198015-WinServer03R2/windows_deployment_package_sysprep.cab./opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab [Cloud_DS3] (Permission denied)

  I had not seen a response on the forums for that so far, if there are please point me in that direction. We are just testing, but I would like to see what the top and work. The extract of the error in the vcloud debug log file is:

  2011-03-24 09:23:48, 431 | ERROR | akimbitask-0 | DRSClusterDeploymentBucket | -DRS deployment failed in the Async section |
  com.vmware.ssdc.util.LMException: NFC HTTP error. Cannot deploy the package to /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab to 0728198015-WinServer03R2/windows_deployment_package_sysprep.cab [Cloud_DS3].
  at com.vmware.vcloud.val.customization.internal.impl.DeploymentPackage.DeployPackage(DeploymentPackage.java:160)
  at com.vmware.vcloud.val.internal.impl.VC20VirtualServer.pushDeploymentPackage(VC20VirtualServer.java:2679)
  at com.vmware.ssdc.backend.ClusterDeploymentBucket.CustomizeVMs(ClusterDeploymentBucket.java:135)
  at com.vmware.ssdc.backend.DRSClusterDeploymentBucket._AsyncDeploy(DRSClusterDeploymentBucket.java:265)
  to com.vmware.ssdc.backend.DRSClusterDeploymentBucket$ 2.invoke(DRSClusterDeploymentBucket.java:161)
  at com.vmware.ssdc.backend.CAkimbiTask._invokeChildUnsafe(CAkimbiTask.java:119)
  to com.vmware.ssdc.backend.CAkimbiTask.access$ 400 (CAkimbiTask.java:39)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.innerRun (CAkimbiTask.java:242)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.access$ 200 (CAkimbiTask.java:168)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread$ 1.run(CAkimbiTask.java:183)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread$ 1.run(CAkimbiTask.java:175)
  at com.vmware.vcloud.common.threadpool.ThreadContextExecutor.execute(ThreadContextExecutor.java:36)
  to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.run (CAkimbiTask.java:194)
  Due to: java.io.FileNotFoundException: /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab (Permission denied)
  at java.io.FileInputStream.open (Native Method)
  at java.io.FileInputStream. < init > (FileInputStream.java:106)
  at org.apache.commons.httpclient.methods.FileRequestEntity.writeRequest(FileRequestEntity.java:73)
  at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:499)
  at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2114)
  at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1096)
  at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
  at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
  at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
  at com.vmware.vcloud.val.nfc.client.impl.HttpNfcClientSession.executeMethod(HttpNfcClientSession.java:200)
  at com.vmware.vcloud.val.nfc.client.impl.HttpNfcClientSession.putFile(HttpNfcClientSession.java:181)
  at com.vmware.vcloud.val.nfc.client.impl.NfcClientFacadeImpl.putFile(NfcClientFacadeImpl.java:61)
  at com.vmware.vcloud.val.customization.internal.impl.DeploymentPackage.DeployPackage(DeploymentPackage.java:158)
  ... 12 more

  Thanks in advance for any help.

  vCD creates a non-root user, vcloud, which is what most of the services is running as. There is a small component that runs as root in order to use the privileged TCP ports (80, 443), but everything else is actually happening in the non-preferred process.

  So you can have a problem with permissions on the sysprep cab file or the directory it is located in (especially if you have changed your umask default RHEL).

  As root:

  CD $VCLOUD_HOME

  chown-r vcloud:vcloud guestcustomization

  chmod 550 guestcustomization

  chmod 550 guestcustomization / *.

  If you need to rebuild the sysprep files in the future, you can a mode of 770 instead, but the vcloud user doesn't have write access to anything in this directory.

  Without restarting the cell is necessary. Just try to customize an another TIME.

• When the computer restarts, I get the error cannot create shell notification icon please help

  When I reboot count it I get error cannot create shell notification icon can any body help me

  Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

  Apart from that, I suggest you do an online virus and malware scan on the system.

  http://OneCare.live.com/site/en-us/default.htm

  If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• vCloud connector - cannot copy VAPP vCloud Director to vSphere

  Evening,

  Try to copy a paralytic to vCloud Director on vCenter 5.5 5.6 using vCloud connector 2.7.

  The scenario:

  -vCloud Director fully configured with one Org, an Org vDC and a catalog.

  -The catalog is entirely filled, shared and published.

  -Org and catalog are configured to allow the publication to external organizations;

  -vCenter and vCloud Director have been added to vCloud connector via vSphere Client plug-ins;

  -vCloud plug connector is able to see the entire structures of vSphere and vCD (org records, catalogs, vApps, models, etc.).

  Reproduce the error:

  -Using the vSphere Client, click on the Org vCD;

  -Go to the tab vApps.

  -Select a VAPP off engine;

  -Click on copy.

  -Select Catalog (it is marked as shared and, curiously, unpublished);

  -Select vCenter as the target;

  -Select the clusters, folders, data store, formatting the drive and so on;

  -Power On TIME after deploying (or not, does not matter);

  -Validate (managed);

  -Finishing.

  Task starts and fails in a minute (or less) with the following message:

  "Export OVF has failed. Failure when copying data to the clouds: https://< vcloud_director_fqdn >. Reason: [0e65fbc1-4e04-4924-ae06-c4377dfc97af] there is no catalog in the organization. »

  Looks as vCloud connector, for some reason, is unable to locate the catalog during deployment (although it may be perfectly visible during the Copy Wizard and in his inventory).

  I tried searching for it and can't find anything similar to this error.

  Maybe it s a vCD configuration error, but how would be? I ve already selected all types of option to allow editing of catalogue and sharing, and nothing has changed.

  I published also successfully catalog VCDs to vCloud connector content library, so nothing else makes sense to me.

  Solved.

  Created a new catalog and IS NOT published. Used for the copy. Went well.

• How to create the Clone VM using VCO plugin to vCloud Director?

  Hello

  Vcloud Director I can do a right-click option to copy of VM use for cloning. However, vCenter Orchestrator 5.1, I don't see the copy method in the VclVM object.

  How to write a stream VCO to clone a virtual machine that is customized?

  Kind regards

  Danie

  In vCD you need to recompose a vApp to clone a virtual machine in a paralytic.

  Here's some code I created for the vCD 1.5

  var recomposeVAppParams = new VclRecomposeVAppParams();
  var vmItem = new VclSourcedCompositionItemParam();
  if (vmName != null) vm.name = vmName;
  vmItem.source = vm.getReference();
  vmItem.sourceDelete = false;
  vmItem.instantiationParams = new VclInstantiationParams();
  
  //var numNetConnections = vm.getNetworkConnectionSection().networkConnection.size();
  
  var networkConnectionSection = vm.getNetworkConnectionSection();
  vmItem.instantiationParams.section.add(networkConnectionSection);
  
  recomposeVAppParams.sourcedItem.add(vmItem);
  return vApp.recompose(recomposeVAppParams);
  

  If you want to just clone the VAPP then it is a workflow of clone in the library of vCloud.

• vCloud Director: cannot deploy vShield Edge VM

  Do an Eval of vCloud Director.

  When I try to create a network of organizations, it fails with the following error message:

  Error creating shield network appliance.

  -The edge of VM creation error.

  -Internal Server Error

  -java.security.cert.CertificateException: certificate fingerprint host did not match expected value

  -Host digital fingerprint of the certificate does not match expected value

  In vCenter, I see that she tries to deploy the model to the OVF, but the task fails with status "the task was cancelled by user.

  Anyone see this before?  No idea how to fix?

  In VC, go to Administration, the parameters of the server vCenter, SSL settings, and ensure that all hosts have checkboxes check

• Run a Virtual Appliance on a vCloud Director 5.5 VDC/vApp

  I want to deploy a Sonicwall Email Security Virtual Appliance (VA) in a vCloud Director 5.5 VDC/vApp.  The VA is in OVA format.  How do you do this in Director vCloud?  I tried to import the VA using vSphere importing, but is does not appear as a selection.

  Thanks for the detailed info Alan.

  2014-12-08 23:14:53, 309 | WARN | backend-activity-pool-237 | VAppUploadManagerImpl | Transfer session: 91f2a458-f5b5-c 451-835-bec280e4165f. Error during downloading content: folder 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) does not exist in our inventory, but vCenter Server claims it does. | VCD=939f2481-9f68-4a39-a0a3-769fc9387b15,Task=65ad7396-5084-4E51-941a-a9f4abcdc657 activity = urn: uuid:65ad7396-5084-4e51-941a-a9f4abcdc657

  com.vmware.ssdc.util.LMException: 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) folder does not exist in our inventory, but vCenter Server claims it does.

  at com.vmware.vcloud.val.internal.impl.VC20VirtualEngine.waitForFolderInInventory(VC20VirtualEngine.java:2102)

  at com.vmware.vcloud.val.internal.impl.FolderUtil.createFolderIfNotAlreadyExist(FolderUtil.java:142)

  Can you please check if the vCD vCenter proxy running.

  Please see the links below.

  Cannot create the VAPP to vCloud 5.1

  http://www.Boche.net/blog/index.php/2011/12/16/vCloud-Director-and-vCenter-proxy-service-failure/

  vCenter | Tom Fojta & #039; s Blog

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.

• External network to Vcloud Director.

  Hello

  Why are external network created in the Vcloud directory (I read that it is used to connect Vcloud Director to the outside world). What exactly will be the outside world, and if I don't want to connect the vcloud Director to any other network, I can't ignore the creation of the external network?

  Kind regards

  Vikram kumar. P

  Yes, it's fine.  If you want a completely encapsulated environment, you cannot use SSH/RDP to access systems.  You must use the VMRC for access, and you will need to install the software of the ISO in the catalog.

  It can be limiting, but works well for a completely confined environment.