Unable to link control programmatically

Similar Questions

• Control programmatic data access

  Hello
  
  I'm looking to control programmatic data access, and I came up with a few questions, I would like to present.
  
  1 execution datacontrol operations as that object the OperationBinding returns back any value? that is, would have CreateInsert of execution as a return of the OperationBinding of the coresponding row key?
  2. How do I pass NamedData (or its equivalent) in CreateWithParams when I call from a managed bean? Currently I use the OperationBinding to perform these operations.
  3. given a RowKey, there are how change the attributes of an existing line in a display object, or test if a line with the RowKey provided.
  
  Kind regards
  Abdel Davis
  
  P.S. Please excuse lumping my questions together, they are in fact linked together in a request, I am currently working on that.

  Hi Abdel Davis,
  1, I think that may be the result of CreateInsert is null. You can bind the af: table richeTableau in managed bean, after createInsert you can use the current line.
  2, use operationBinding.getParamsMap.put () to pass parameter and value pair
  3, use findByKey() to find the line and row.setAttribute () to change the attribute

  Concerning
  Shawn

  Published by: 893855 on November 5, 2011 09:05

• Portege R600 - Error 734 PPP Link Control Protocol resulted

  We have a Toshiba Portégé R600-102 using an Orange 3 G SIM card configuration like a dial connection to * 99 # (APN: internetvpn) which works fine in Merseyside, however, as soon as our user takes it outside Liverpool (more precisely an hour outside on a trip to London by train) connection drops completely and does not allow the user restore the link giving the error 734 : The PPP link control has been terminated. If you use Toshiba wireless connections Manager it just says connection failed. The laptop won't re - connect to the 3 g network until the user is back near Liverpool?

  I spoke to Orange on what originally advised me to change some settings in dial-up access, but this made no difference, tried to contact Orange again today, but told me that they don't support any other models other than laptops they provide with internal 3 g modems.

  Any help would be greatly appreciated, let me know if you need more information.

  Concerning

  Andy

  Hi mate

  I googled a little and a big thanks to MS knowledge base.
  I found there an interesting document that describes the solution exactly for the error message you received:

  "+ Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection.
  http://support.Microsoft.com/kb/318718

  _Solution: _

  You have to disable negotiate Multilink for link simple connections check box.

  The option can be found in the connection to dial-up networking-> properties-> tab-> networking settings

  For more details, see the MS doc!

• Increment the value of the control programmatically, strange result

  I have a problem with this VI.
  I did it with LV 2009.
  There is an auxiliary VI that I use to remove the reference to a control programmatically.
  The test.vi (main) tries to set increment to a digital-digital control programmatically.
  With the help of the 'heap of ctrl VI', it is possible to do all the code in a single case of big event.

  If you change multiplier 'n'--> he grabs value 'n', for N = 1, 2, 3,..., 7
  It takes the value of N the multiplier and checks if it is == 1. Then the value increment of the N value accordingly.

  Problem:
  It does not work as expected.
  If you explore the thread, it's all good until the equal check, I don't understand why it does not work.

  Thanks for your advice.
  Greetings

  The problem is probably not full equality of types of data comparison.  As fractions like 0.1 cannot be represented exactly in binary, is often equal to comparisons result in numbers that appear to be equal when displayed with one decimal place are actually different in the 14th, 15th or 16th place.

  Use a rough comparison: is the absolute value of the difference of less than 10 ^-14?

  Lynn

• "Error 734 PPP link control led" not able to connect the Nokia N73 to internet.

  Original title; Error 734 couldn't find a solution.

  I'm using Windows 7 Ultimate and Nokia N73 to connect to Internet. But I can not connect because the error message "Error 734 PPP link control has been terminated" is displayed. I've disabled the box negotiate Multilink for single link connections and tried again. But the error is still exist. How to solve this problem?

  Hello AhamedSajad,

  You did it changes on your computer that may have caused the connection to stop working?
  I suggest starting with a system restore to a time where the connection was working:
  http://support.Microsoft.com/kb/306084

• Error 734 PPP link control protocol resulted.

  When I try to access the internet via bluetooth on my laptop I am getting error 734. I tried the options on the Microsoft support site and the error still exists. Can you suggest a few checks that can be performed to determine if the problem lies in the network or on my mobile bluetooth. Some suggestions to address this problem are also welcome.

  Hi SuryaChetan,

  Initially, I suggest that you call your cellular service provider to fix the problem at their end.

  I have more, I would like to refer to the following article if troubleshooting with your wireless service provider does not work.

  "Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection: http://support.Microsoft.com/default.aspx?scid=kb;en-us;318718

  Please let us know if you are able to solve your problem or need help. Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After three days of my 3g modem works fine, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped.

  Last week for mobile connection, I bought a 3G modem on my laptop. After three days, works very well, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped. It occurs when I try to establish a Dial-Up connection.

  I searched the Internet and found a section of troubleshooting on the Microsoft Web site. However, although I have followed all the steps, the error continues. I've already uninstalled and again installed the program, does not. I use Windows Vista Home Premium.

  What should I do now?

  original title: 3 G Modem

  Hello

  I suggest you to contact your internet service provider for assistance.

• When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) ' appears, what should I do?

  When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) "is displayed.

  The PPP link control protocol was terminated. (Error 734) For troubleshooting on measure for that information
  What should I do?

  Hello

  ·        Using a modem connection?

  ·        You did changes to the computer before the show?

  ·        Are you connected to any server?

  I suggest you to try the suggestion of linking and check if it helps:

  "Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection

  http://support.Microsoft.com/kb/318718

  Note: ignore the application of article.

• Canoe open attachment how to "link control panel Association the value of Set?

  Canoe open attachment how to "link control panel Association the value of Set?

  Hello

  something, you should also know, is that you need the program installed on your computer where the attachment file extension refers too

  and read this to set the file association

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

• Error 734: PPP link control has been terminated... always show upward when I try to connect to the internet... How do I solve this problem... I m using win 7 as my operating system.

  • I want to connect Internet usiang dial-up access. I m using nok * a modem n81as and telkoms * l as the map. When I m trying to connect it always failed and an error appeared and said: "Error 734: the PPP link control has been terminated. and I m using Windows 7 as my operating system. Please help me solve this problem.thanks a lot...

  the 734 error can be solved by adding a piece of code...

  On your laptop, open the list of devices and dpouble click on the unit matched BB... Select material and double click on blue tooth modem... Select advanced in the additional parameter, place the following code:

  + cgdcont = 1, "IP", "bb.telus.com"

  I'm on telus and by using a bold 9700... to determine the URL above, you BB select Option > Advanced Options > TCP/IP

  APN:BB. TELUS.com... in the code snippet above replace bb.telus.com by all that is not in your apn...

  try to connect

• If you change a value on a disabled control programmatically, become reactivated?

  I'm trying to solve a problem on a surface that worked before I added new codes...

  I have a cluster with Boolean LED, ring type dropdown menus and text boxes.

  Before... I've had situations where I've disabled the entire cluster... and it worked, and I even felt on the mouse down, that someone was trying to make changes while he was disabled and I put forward a teling user message that them no change is possible.

  Now... I have added code, it'll make the updates on the value of the function from code LEDs now a serial connection. I am wanting to change the value of the LED (and possibly the other controls on the cluster) even if it is disabled.

  However, now when I click on the disabled so-called cluster... I can now change the value of the LED... as it is not off more, but the code for the Message of the user triggers always.

  Just to test things... I set the disabled property of 1 to 2... so it would be totally disabled and grayed out... THAT is not the case now... so, I'm stumped.

  My first thoughts were... may LV is the reactivation of some of its parts when I change programmatically a value of something is disabled on the Panel before... is this the case?

  Thank you

  Cayenne

  In a cluster when you update the value of a disabled control, it will be updated and you can read the value programmatically, but if the same command that you try to access it manually through the front side you can not access this similar case with the disabled grayed out property. So that you can understand the property is given to show the user that the control is in-accessible, but it will not be reactivated unless you change the disabled property of the control.

• All the default values of control programmatically (arduino distribution)

  So I know this has been discussed before, but I have a unique situation.  I will download code to Arduinos using Labview for Arduino toolkit compiler.  I want to programmatically set some default control values on each Arduino using a Labview GUI.  The Arduino kit that I use has a VI of compilation which takes a VI, it compiles, and then it downloads to the Arduino.  How can I change the default value for controls of the VI before he compiled and downloaded?

  Have you tried to use nodes property to set values and nodes of the method of "current default" and save the VI then?

  

• Change of color of the page in a tab control programmatically

  AFAIK, you can manually change the colors of the individual pages in a tab control (if you have the property allow several colors set to True), but you can't do it programmatically.

  For my particular application, there is only a single page color, I need to change, so I can get the effect by setting the colors I want manually and activating / deactivating allow multiple colors on the control tab as needed, but I wonder if there is a better solution out there.

  Thank you

  Kyle

  Of course, you can:

  

  Not sure if you try to change the background or foreground color.

• to make a transparent image control programmatically

  I can make a picture transparent control prior to execution, and it works fine.

  I just can't seem to be able to do it programmatically

  
  

• Beginner: How to set the label of the digital control programmatically?

  I have a digital control and I want to put the labels (and unit) programmatically. I've created a property for the text of the label node, and then it changed to a knot of Scripture. For now I have just son a constant in this property. When running I get the error "input unit is not compatible with the current unit." However, the property and the constant are strings "roses." Is what I'm trying to do possible? My apologies in advance for a noob question.

  You will not be able to change the value of the property label programmatically. Here is an article in the knowledge base that explains this and a way around:

  Programmatically change the label for a control or the indicator in LabVIEW