Unable to manage one of the plugin

Similar Questions

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• Agent 4.0.2 "Unable to locate one of the following binary files" on Linux

  Hello
  
  I have two servers that I'm watching with Hyperic. I had the agent 3.2.x on their job very well. However, when I try to run the 4.0.2 agent, I get an error message whenever I have try to launch HQ - agent.sh.  No idea why?
  
  bin #./hq-agent.sh start
  Cannot locate one of the following binary files:
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... Wrapper/sbin/Wrapper-Linux-Intel (r) xeon (tm) cpu2.40ghz - 32
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... Wrapper/sbin/Wrapper-Linux-Intel (r) xeon (tm) 64 - cpu2.40ghz
  root/Hyperic-HQ-agent-4.0.2/Wrapper/sbin/... /... / Wrapper/sbin/Wrapper
  
  The files needed seem to be in packaging/sbin /.  The contents of this directory on my server is:
  
  sbin # ls-l
  2368 total
  -rwxr-xr-x 1 root root 281540 18 Dec 18:42 wrapper-aix-ppc-32
  -rwxr-xr-x 1 root root 319397 18 Dec 18:42 wrapper-aix-ppc-64
  -rwxr-xr-x 1 root root 88703 18 Dec 18:42 wrapper-freebsd - x 86-32
  -rwxr-xr-x 1 root root 176380 18 Dec 18:43 wrapper-hpux-parisc-32
  -rwxr-xr-x 1 root root 253808 18 Dec 18:43 wrapper-hpux-parisc-64
  -rwxr-xr-x 1 root root 140198 18 Dec 18:42 wrapper-linux-ppc-64
  -rwxr-xr-x 1 root root 99401 18 Dec 18:42 wrapper-linux - x 86-32
  -rwxr-xr-x 1 root root 111027 18 Dec 18:42 wrapper-linux - x 86-64
  -rwxr-xr-x 1 root root 114052 18 Dec 18:42 wrapper-macosx-ppc-32
  -rwxr-xr-x 1 root root 233604 18 Dec 18:43 wrapper-Mac OS x-universal-32
  -rwxr-xr-x 1 root root 112536 18 Dec 18:43 wrapper-solaris-sparc-32
  -rwxr-xr-x 1 root root 148512 18 Dec 18:43 wrapper-solaris-sparc-64
  -rwxr-xr-x 1 root root 110992 18 Dec 18:43 wrapper-solaris - x 86-32
  -rwxr-xr-x 1 root root 204800 18 Dec 18:42 wrapper-windows - x 86 - 32.exe
  
  BTW: I am on 32-bit linux 2.6.17 kernel.
  
  Thank you
  Brian

  HQ - agent.sh first is just a script. It actually run bundles/agent-4.0.0-EE-889/bin/hq-agent.sh script.

  I believe you can manually set the DIST_ARCH parameter to account for your system architecture.

  DIST_ARCH ='uname Pei 2 >/dev/null | TR [: upper:] [: lower:] | "TR-d [: white:]"

  it change something like

  DIST_ARCH = x86_32 (not sure what you have)

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Unable to download one of the applications

  Hello

  I tried to download apps from the creative cloud several times. For some reason, it takes half an hour to download nine percent and it stops downloading after a while. I tried to download apps on google chrome, Internet Explorer 8 and creative cloud desktop. What can I do to reslove this problem?

  Hello

  Could you please share some information about what you run in error? It would be helpful to resolve your problem.

  Harinder

• Replace the configuration of the plugin apps config.xml element

  One of the plugins that I use has the following config: https://github.com/katzer/cordova-plugin-local-notifications/blob/master/plugin.xml

  One of the sections in there is:

  < target = "AndroidManifest.xml configuration file" parent = "/ manifest" > ""

  < android:name = "android.permission.RECEIVE_BOOT_COMPLETED permissions uses" / > "

  < android:name = "android.permission.WRITE_EXTERNAL_STORAGE permissions uses" / > "

  < / config-file >

  I would replace this is:

  < target = "AndroidManifest.xml configuration file" parent = "/ manifest" > ""

  < android:name = "android.permission.RECEIVE_BOOT_COMPLETED permissions uses" / > "

  < android:name = "android.permission.WRITE_EXTERNAL_STORAGE uses-permission" android: maxSdkVersion = "18" / > "

  < / config-file >

  This is because I understand that permissions are not forced to write to the external storage of your application from KitKat (4.4) (https://developer.android.com/guide/topics/data/data-storage.html#AccessingExtFiles), and I want to ask this permission is turned off for users to download the application.

  I build my app using PhoneGap Build (phonegap-version is cli - 6.3.0), is there any way of this from my apps config.xml file? So far I have tried several things led to errors on malformed or duplicate < uses credentials > elements config.

  Thank you

  Here are a few possibilities:

  1. The plugin of the fork and edit as you like and build from your fork (see the documentation for the use of rest git plugins: Plugins |) PhoneGap Docs).
  2. The plugin of the fork, edit and send a request to shoot for having him up-to-date on the repo of NPM (1 or 2).
  3. Try to use the element of the BMPS config file to change the manifest: change manifest. PhoneGap Docs (do not know if it will work in this use case).

• supported versions of the plugin for a specific vRO release

  Hi all

  I am struggling to identify what are all the versions of the plugin versions supported by a vRealize Orchestrator release specific or what are the vRealize Orchestrator release supported by a specific plugin.

  If we take as example one of the vRealize Orchestrator releases: 5.5.2 there is not anywhere in the release notes where I can see what versions of the plugin are supported by the latter: VMware vCenter Orchestrator Release Notes

  I can see the plugin versions it brings by default, but how do I know if all the other versions of plugins I currently use will work?

  Apart from that, if we now look at the release of one of the plugins vRO notes: VMware vCenter Orchestrator plug-in for vCloud Center Automation - Release Notes , I can see the following:

  VMware vCenter Orchestrator plug-ins for vCloud Automation Center 6.1 | September 9, 2014 | Generation 2073620

  VMware vCenter Orchestrator 5.5.2 | September 9, 2014 | Generation 1951762

  
  

  This means that this particular plugin version is only supported by vRO 5.5.2 when used in conjunction with vCAC 6.1? If the incompatibility of these versions he only is not supported?

  As you can see, it's making my head... so any info you can share with me would be great.

  Thanks in advance.

  
  

  Generally, we try to keep the plug-ins compatible across multiple versions of vRO. But this is not always possible; for example, a plugin could use a library to communicate with external systems and the library could be linked to a particular version.

  We have a platform internal vRO <->plugin version interop table but as far as I KNOW, he is not yet available to the public.

• Problems with the plugin weboperator 5.5

  I recently installed the Orchestrator 5.5 new in our new environment, but I'm getting this strange question than the weboperator

  display of Web pages is missing in the list of web display. I tried to reload the plugin and restart the server, but nothing do not seem to help.

  The only way I managed to get the plugin to show is by adding the package manually by extracting from the plugin .dar file. Even after this the web sight guard send me errors while trying to connect. And sometimes everything just works at all

  By "reloading the plugin" mean you clicked on the button "reload all plug-ins ' on the 'Plugins' page in the vCO Web Configurator?

  On the 'Troubleshooting' page, there is a link "Version current Reset." Have you tried it? Supposedly, he will be re - install plug-ins on the next reboot of the server.

  Add manually the package "might" work, but is not supported - package needs to be deployed as part of the installation of plug-ins.

  What are the mistakes do you receive when you try to open a session? Could you check the files of newspapers of vCO for exception and error stack trace?

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• Unable to connect to the Internet on one of the 3 PCs

  A week ago, I suddenly can't connect to the Internet on one of my PC, although my other 2 always connect very well.  I tried to repair my LAN in network connections, so that my IP can not be renewed.  Also tried an ipconfig / renew, which gives the result of "unable to contact your DHCP server."  Ipconfig displays my 169.254.90.197, even for my default gateway IP.  Tried to turn off and reset my router.   My network card shows work.  Any ideas?

  Ipconfig displays my 169.254.90.197, even for my default gateway IP.

  This means that your NETWORK card is set to "Obtain an IP address automatically" (which is the default and confirmed you is, indeed, your property) and that the computer cannot connect to a DHCP server.

  In virtually all home networks, the DHCP server is part of the router.  Means that the message has computer cannot connect to the router, DHCP server (b) on the router is off, or DHCP (c) of the router is broken.

  Because your other computers work, options (b) and (c) are excluded.  This means that the problem is (a): the computer cannot connect to the router.

  The most frequent cause of failure of the connection to the router is there a configuration of wireless security problem, even if you do not mention if the problem computer connects via a wireless NETWORK card or a wired network card.

  Initially, access the configuration utility of your router (from one of the computers that can connect to the Internet through the router).  Confirm that

  • the DHCP server works (of course it is)
  • the DHCP server is configured to provide a sufficient number of IP addresses (this is probably true, unless someone has been playing with the configuration of your router in your back)
  • There is no MAC filter or another filter put in place in your router that is off of your computer to 'problem' (as in the previous point, it is probably also true for the same reason)

  If you use a wired NETWORK adapter, the likely problem is hardware: either the cable is bad, the port in the router is bad, or your network card is bad.  To test these conditions, the simplest method is to swap the known parts of work.

  If the wireless connection, go to your wireless router configuration utility section.  First of all, make sure that your router is configured to use the correct wifi band which is compatible with all of your devices (A, B, G, N) wireless.  Although it is unlikely that this parameter has changed since a week ago, it should be confirmed (the usual problem with an older wireless adapter, say wireless B, trying to connect to a router, the 'G' value only rather than 'B & G";) even for wireless-N).

  At this point, you have two options:

  Option 1: Write down all settings relevant wireless configuration then go back on the problem computer and try to connect using the correct information.

  Option 2: temporarily disable any security wireless to the router and see if you can connect.

  Whichever option you take, you'll want to remove the Wireless 'profile' of your computer before you try to connect.  If you are using Windows WZC, right-click on the icon for the adapter wireless in network connections, click Properties, then the tab 'wireless networks '.  Find your network (SSID) in the list of preferred networks and remove it.

• I'm unable to open one of my 'recent documents' document. It is said to make sure that the network resource is available.

  Original title: "Recent Documents".

  I'm unable to open one of my 'recent documents' document.  It is said to make sure that the network resource is available.  What does that mean?  And I can't find the document in "My Documents" is.  And I tried a search.

  Hello

  The error means either that the document no longer is located in the folder it was when it was finally opened or the location that the file was initially located in is no longer in the same place.

  Example 1: I open a document in the My Documents folder, then after closing the document, I moved manually the file to the desktop.

  Example2: I open a document located on a removable hard drive. After the closure of the paper, I then disconnect the removable hard drive of the PC.

  In these two examples, Windows would be able to find the Document using the "Recent Documents" list

  Step 1: I recommend that you check the trash or see if the document is located on a removable hard drive (or USB key) that is is more attached to the computer.

  Step 2: Use recovery software of the third party to recover the document.
   
  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I managed to remove the icon to display all open windows one behind the other.

  I managed to remove the icon to display all open windows one behind the other.  Where can I find it now?

  Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.

  Hello

  Which, in my view, that you have a problem with, it's called windows Flip 3D!

  Try this first and see how you go...

  1. To turn on the Quick Launch bar, follow these steps:
  2. Right-click anywhere on an empty spot on the taskbar.
  3. Choose toolbars from the menu that appears.
  4. Select Quick Launch in the following menu so that it is checked.

  You should then be able to click the icon to switch between Windows now and use the 3d Flip...

  Or

  . Right click on the Quick Launch toolbar, but not on an icon
  2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:

  C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  3. right click in an empty area of this folder
  4. Select new, then shortcut from the context menu
  5. for the location text box, enter the following text:

  C:\Windows\System32\rundll32.exe dwmapi #105

  6. click on the next button
  7. appoint. (Flip3D, for example)
  8. click on finish

  The shortcut will now be in your Quick Launch toolbar.

  Concerning

  GT4U

• Windows Media Player is unable to extract one or more tracks from the CD.

  I also got this message "Windows Media Player is unable to extract one or more tracks from the CD" pop up in an attempt to 'Copy' the CD!  I have Windows 7 and had NO problem for several weeks, ripping my music from CD sales in my MUSIC folder.  I got all "parameters" laid so that whenever I inserted a new CD he automatically pulled and then ejected.  I had NOT brought any changes to settings but for some reason all of a sudden it doesn't work anymore?

  I have trried restart, check all the parameters according to your advice making SURE that all the files of 'Target' were correct (they are), but all that happens is a few seconds after I insert a CD it gives me this message (Windows Media Player cannot extract one or more tracks from the CD.) and then the CD will eject with NO of TEAR that occur?  It's VERY frustrating!  There, can anyone help?  Please?  I have NO idea where to check then!

  Hi Jetlag40,
   
  Follow the steps mentioned in the reference link below and check if it works.
   
  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/93c279f7-89ae-4a7c-B7EA-fdc7785ed335
  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.
   

• Get the error message saying that Windows Media Player is unable to extract one or more tracks of CD

  Hi, I'm trying to copy a few tracks from a cd, but the computer rejects the cd saying that windows media player is unable to extract one or more tracks of cd.

  Hello

  Welcome to the Microsoft Community and forums thanks for posting the question. According to the description, you get an error message "theWindows Media Player can not extract one or more tracks of CD". We will analyze and identify the cause of the problem.

  Method 1:

  
  

  You can run the fix provided in the link and check out them.

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  
  Method 2:
  
  You can also try the steps and check.
   
  a. open Windows Media Player.
  b. click on tools-> Options.
  c. tab extract, uncheck "copy protect music".
  
  Method 3:
  
   
  You can also change the Rip settings and check if it helps.
  Change settings for ripping
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
   
  
  More information on:

  Extract music from a CD
  http://Windows.Microsoft.com/en-us/Windows7/rip-music-from-a-CD

   

   

  You can also try the steps given by Shinmila: March 25, 2010 and check if this may help:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/CD-wont-RIP-using-Windows-Media-Player-in-Windows/96afeb65-4A6D-4559-AF83-c9b52e42a938

   

   

  Hope this information helps. Please reply with the status so that we can help you.

   

• Trying to upgrade Windows 7 Professional edition, but make error "the application cannot find one of its required files, possible because he was unable to create it in the folder".

  I'm trying to update Windows Professional and the following error message keeps appearing in the "application cannot find one of its files required, possible because he was unable to create it in the folder.  Please make sure that the folder in which this application was downloaded is accessible and not readonly.  Can someone tell me what to do?

  Hi Bill,

  Please take a look at the thread similar here, thanks to a possible correction.

  I hope this helps!