Unable to name a specific to a virtual network IP subnet

My host is running Windows 7 (64 bit) - Enterprise edition and VMware workstation version is "10.0.2 build-1744117.

I wanted to assign a subnet specific to my VMnet1 (guest only network), by changing the default value. I wanted to put to 192.168.10.0 subnet, the default value is 192.168.154.0. However, I am not able to change, I am able to create a new network virtual host only with the 192.168.10.0 subnet.

This facility, also features Oracle VirtualBox host install (before installing VMWare). As far as I KNOW, Virtualbox does not 192.168.10.0. Here's what "ipconfig" on my host shows:

Windows IP configuration

Wireless Network Connection 2 wireless LAN adapter:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Wireless network connection Wireless LAN adapter:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Ethernet connection to the Local network card:

The connection-specific DNS suffix. :

Link-local IPv6 Address...: fe80::24a5:8 has 41: c310:36 12% cd

IPv4 address...: 192.168.1.2.

... Subnet mask: 255.255.255.0.

... Default gateway. : 192.168.1.1.

Network adapter Ethernet VirtualBox:

The connection-specific DNS suffix. :

Link-local IPv6 Address...: fe80::20f5:13e3:a53:a273% 20

IPv4 address...: 192.168.56.1.

... Subnet mask: 255.255.255.0.

... Default gateway. :

Ethernet VMware Network adapter adapt VMnet1:

The connection-specific DNS suffix. :

Link-local IPv6 Address...: fe80::a0cc:1062:e813:a34d % 27

IPv4 address...: 192.168.154.1.

... Subnet mask: 255.255.255.0.

... Default gateway. :

Ethernet VMware Network adapter adapt VMnet8:

The connection-specific DNS suffix. :

Link-local IPv6 Address...: fe80::c10c:ffc2:2e28:8176% 28

IPv4 address...: 192.168.204.1.

... Subnet mask: 255.255.255.0.

... Default gateway. :

Tunnel adapter isatap. {2D203592-7DA6-47C7-82F2-5C84046D2E30}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Card tunnel Local Area Connection * 12:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Tunnel adapter isatap. {F855E431-EAC8-41E1-A8F3-1854DC7CE659}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Tunnel adapter isatap. {F054A076-D9DC-4969-BD99-E95898CA14A9}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Tunnel adapter isatap. {EF306F3A-91CF-4352-B3A4-37F4259C4BB8}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Tunnel adapter isatap. {CB5437AD-EB6C-4630-95EE-B20AE00E5A8B}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Tunnel adapter isatap. {20C17CBD-F696-4382-9BA5-D34448EE5BA1}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Card reusable tunnel ISATAP Interface {A8830BA3-C081-47A7-9104-6CC543A4A59D}:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Reason of trying to define virtual network of specific subnet configuration is the 'device type' I use the use of this subnet a bit hardcoded. A little bit because it's very complex to change, due to the nature of software inside.

Welcome to the community,

In some cases UAC or virusscan/firewall application can block the change. As a first step, start the virtual network in the menu editor start by clicking on the link and select 'Run as Administrator' to see if that solves the problem.

André

Tags: VMware

Similar Questions

  • vWorkspace 8.0 | HyperV 2012 R2 | < Unspecified > virtual network name

    At a customer's, we went just all HyperV server to HyperV 2012R2.

    Now, we have a problem that the "said virtual network name '.

    Is this a known issue?

    Import does not work in my case.

    To work around the problem we have already defined the network name in the settings manually, but it's always a strange question.

    feature or bug what is the difference ;)

  • How to set a specific MAC address for a virtual NETWORK adapter in ESXi 4.1?

    I would like to move a virtual machine to another server ESXi, but I saw every time I use the converter, it changes the MAC of the virtual network interface! Also if I copy the virtual machine to a vmware 2.0 server the same thing happens. Is it possible to keep the same address in another computer and turn off the virtual machine from the first computer source to avoid conflicts of mac?

    Thank you.

    Using the converter, you'll always end up with a different MAC address. If you just want to "pass" the virtual machine, you can use utilities like of Veeam FastSCP.

    Another option is to set up a MAC address in the network settings of the virtual machine. After conversion, you can reset the MAC address to the value of "old."

    For some hosted VMware products (such as Workstation and Server maybe player) there's a vmx ethernetX.checkMACAddress = "FALSE" setting that allows you to set any MAC address you want to. For more information, see http://sanbarrow.com/vmx/vmx-network-advanced.html.

    André

  • PIX 515e, multiple VIRTUAL networks on a physical interface to DMZ

    We try to set up multiple VIRTUAL networks on a physical interface to the DMZ on a PIX 515e.

    The goal is to have logical subnets linked to our single, physical interface DMZ.

    Here's what I've tried so far without success:

    The switch

    -created the vlan 30

    -added switchports fa0/1 to 30 of vlan

    -attached host 192.168.100.1 in fa0/1

    -added switchport fa0/24 to the vlan 1 and vlan 30 with multimode

    -interface PIX DMZ connected to fa0/24 switchport

    -attached host to switchport fa0/10 172.16.1.55 (vlan 1)

    PIX:

    Auto interface ethernet2

    logical ethernet2 vlan30 interface

    nameif DMZ security50 ethernet2

    nameif vlan30 dmz2 security50

    address IP DMZ 172.16.1.254 255.255.255.0

    IP address dmz2 192.168.100.254 255.255.255.0

    Results:

    -172.16.1.55 has full connectivity to the PIX and beyond.

    -192.168.100.1 cannot ping the PIX to the 192.168.100.254 or anything else besides.

    Any help would be greatly appreciated. Also, I realize that I could buy a four port NIC and use the physical interfaces, but I can't get the approved purchase.

    Thank you

    Creation of VLANS on Ethernet1

    We want to create a new interface VLAN - VLAN30 and name DMZ2. Also affect the security level 50 in it.

    Step 1: Create a physical Interface:

    PIX (config) # interface ethernet1 vlan2 physical

    Step 2: Name the Interface and set the security level:

    PIX (config) # nameif ethernet1 inside the security100

    Step 3: Assign the IP address of the interface:

    PIX (config) # ip inside 192.168.1.1 address 255.255.255.0

    Step 4: Create the logical Interface:

    PIX (config) # interface ethernet1 vlan30 logical

    Step 5: Name of the Interface and set the security level:

    PIX (config) # nameif vlan30 DMZ2 security50

    Step 6: Assign IP address to the interface:

    IP pix (config) # DMZ2 192.168.100.254 255.255.255.0

    Step 7. Switch, set the port where from the inside, to the Isls or dot1q physical interface. Place the sheath in the native vlan2 as in step 1.

  • How can I fix: can't connect Ethernet0 to virtual network ' / dev/vmnet8?

    Hello friends,

    I'm in a huge bind.  I use VMWare for businesses.  Innocently, I downloaded the update.  However, this update made my network unavailable.  My Internet works perfectly well on Mac OS x, but I can't use it on VMWare.  Here is my post:

    VMWare says:

    Ethernet0 cannot connect to virtual network ' / dev/vmnet8.

    More information can be found in the vmware.log file.
    Unable to connect the virtual device Ethernet0.

    XP says:

    Limited or no connectivity: you will not be able to access the internet or a network resource.  This problem occurred because the network has not assigned a network address for the computer.

    I tried the repair feature that says:

    Windows is taking the following steps: renewing your IP address.

    Results: Windows could not finish repairing the problem because the following action cannot be validated: renewing your IP address.  Contact the person who manages your network.

    I changed nothing in my development in addition to be adjusted for the update.  This has been the only change

    Please please help.  This made my trade to stop.  I am very grateful for any help I can get!

    Shutdown, not, suspend the Virtual Machine and then restart the Mac and then run the Virtual Machine again.

    The Virtual Machine has network connectivity now?

    Otherwise I would like to uninstall VMware Fusion 3.1.3 and then install VMware Fusion 3.1.2 as there has been some reports of lost connectivity network with VMware Fusion 3.1.3 which where not able to solve and to revert to the previous version has allowed users to continue working.

  • How to get Ip address of virtual network

    Dear all,

    I created 4 network virtual cards with 4 Ips different, now I required which network card has which Ip mapped separately.

    My requirement is I nedd to add diiferent group port for each addpater of network based on the IP address that I sent in the cloneing of virtual machine model.

    I don't have the control to pass the NIC in particular all by cloneing Ip.

    I wanted to get a list of the network adapter with Ip attached to my vm.

    Is it possible to add a virtual network adapter with Ip specific.

    Please help me.

    Thanks in advance.

    Yes it is possible, that you need to browse the vNIC which was added to a given virtual machine and extract the necessary bits of information. To get the IP address, you should make sure the virtual machine is running VMware Tools, otherwise you won't be able to extract this information.

    You can extract the IP info + the portgroup taking a glance to the guestInfo property that is flush with only if you have the VMware Tools running: http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.vm.GuestInfo.html

    If you have VMware Tools running, but that you want to display the vNIC, then you can take a look at the dashboard device for virtual hardware for the virtual machine and extract only the devices of type VirtualEthernetCard - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.vm.VirtualHardware.html

    Here are a few vSphere SDK for Perl examples you can use to generate a script to extract what you need:

    vmNICManagement.pl

    updateVMPortgroup.pl

    =========================================================================

    William Lam

    VMware vExpert 2009,2010

    VMware VCP3, 4

    VMware VCAP4-DCA

    VMware scripts and resources at: http://www.virtuallyghetto.com/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    VMware developer community

    If you find this information useful, please give points to "correct" or "useful".

  • Change the binding of the virtual network card network

    Hallo,

    Since a few days, I try to get a script in orchestrator.

    here my script:

    System.log ("Start SetNics");

    virtualDeviceConfigSpec1 = new VcVirtualDeviceConfigSpec();

    virtualDeviceConfigSpec1 = System.getModule("com.vmware.library.vc.vm.spec.config").getVirtualDeviceConfigSpec (nic1, null, VcVirtualDeviceConfigSpecOperation.edit)

    virtualDeviceConfigSpec1.device = nic1;

    Server.log ("Set NIC2 ("virtualDeviceConfigSpec1.device.deviceInfo.label") of ConfigSprec");

    virtualDeviceConfigSpec1.device.backing = new VcVirtualEthernetCardNetworkBackingInfo();

    virtualDeviceConfigSpec1.device.backing.network = network1.reference;

    Server.log ("Set Network1 backing");

    virtualDeviceConfigSpec1.operation = VcVirtualDeviceConfigSpecOperation.edit;

    var virtualMachineConfigSpec = new VcVirtualMachineConfigSpec();

    virtualMachineConfigSpec.deviceChange = new Array();

    virtualMachineConfigSpec.deviceChange.push (virtualDeviceConfigSpec1);

    tempVm.reconfigVM_Task (in virtualMachineConfigSpec);

    the script needs to change a network adapter is connected to the network.

    the variables are:

    tempVm = VirtualMachine

    Network1 = network

    NIC1 = VcVirtualPCNet32

    I hope someone could help me

    with greetings

    Malta

    When you retrieve the VirtualDeviceConfigSpec object, in the getVirtualDeviceConfigSpec() method, the method returns the blank template for the VirtualDeviceConfigSpec. To use this technique in your case, you must also specify which virtual device to change for example, you must set the virtualDeviceConfigSpec1.device property to change the network link for a virtual network device. To do the same thing, see the following steps:

    • 1 retrieve all virtual devices available to the virtual machine by using the vm.config.hardware.device property

    • 2. remove the network device appropriate for which the network link must be changed

    • 3 set the appliance recoveries of VirtualDeviceConfigSpec device. Here, you can either use the getvirtualdevicespec() method or create a new object virtualdeviceconfigspec.

    Please see below the code snippet to change the network to a virtual machine.

    Here, we provide three input parameters, namely the virtual machine whose network needs to be changed, the existing network name and the name of the new network.

    string variable existNetwork contains the name of the existing network

    string variable NouveauNetwork contains the name of the new network

    var vmspec = new VcVirtualMachineConfigSpec();

    device of var = new VcVirtualPCNet32();

    var devicearr = new Array();

    NIC var = new VcVirtualEthernetCardNetworkBackingInfo();

    nic.deviceName = NouveauNetwork;

    var devicespec = new VcVirtualDeviceConfigSpec();

    var features = vm.config.hardware.device;

    for (var I in devices)

    {

    If (devices [i] instanceof VcVirtualPCNet32)

    {

    If (.deviceInfo.summary [i] devices is existNetwork)

    {

    devicespec. Device = [i] devices;

    devicespec. Operation = VcVirtualDeviceConfigSpecOperation.edit;

    devicespec. Device.Backing = nic;

    devicearr [0] = devicespec;

    }

    }

    }

    vmspec.deviceChange = devicearr;

    task = vm.reconfigVM_Task (vmspec);

    I hope this helps.

  • Add a virtual network card

    Hello

    Is it possible to add a VM virtual network card, and not a phyiscal adapter?

    I hope to run a quick RLV connecting virtual machines.

    It seems that this is possible, but I couldn't make it work.

    Can you please direct me to a URL or explain how it is possible?

    Thank you very much.

    You can create a vSwitch who doesn't have a card assigned to it, then within your VMS physical NETWORK add virtual NICs attached to this vSwitch for a private local network.   That said, when the VMs are on the same vSwitch and VM network communication inter subnet does not go out to the physical NIC port.

    Dave

    VMware communities user moderator

    New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

    You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

  • Issue of duplicate virtual networks

    In ESX server, I can create many virtual networks that are on the same subnet on the same host? I have a 'service' that requires four virtual servers, work together and each group of four servers is assigned to a specific customer. At the moment I create unique and re-IPing networks servers for each new deployment for every new customer and I wish I could just build a complete environment that works and then them themselves in groups as needed for new customers.

    It's hard to describe, but here's a basic example of what I'm trying to do:

    Server 1 - 192.168.1.1 - connected to the virtual network 2

    Server 2 - 192.168.1.2 - connected to the virtual network 2

    Server 3 - 192.168.1.3 - connected to the virtual network 2

    Server 4 - 192.168.1.4 - connected to the virtual network 2, packed to the physical NETWORK (network 1) card with a unique IP address

    Server 1 - 192.168.1.1 - connected to the virtual network 3

    Server 2 - 192.168.1.2 - connected to the virtual network 3

    Server 3 - 192.168.1.3 - connected to the virtual network 3

    Server 4 - 192.168.1.4 - connected to the virtual network 3, packed to the physical NETWORK (network 1) card with a unique IP address

    Server 1 - 192.168.1.1 - connected to the virtual network 4

    Server 2 - 192.168.1.2 - connected to the virtual network 4

    Server 3 - 192.168.1.3 - connected to the virtual network 4

    Server 4 - 192.168.1.4 - connected to the virtual network 4, filled to the physical NETWORK (network 1) card with a unique IP address

    Nope ESXi will not worry. I did it for the test on a smaller scale environments. I guess your IP Managment is on a separate network.

  • Establishment of a virtual network - need help

    I need a simple few steps before right to set up a virtual network to communicate between my computer and my virtual machine.

    The documentation is really not very clear.  I have configured my virtual machine as a host only network, it's that I went. I can't decipher the manual to allow me to access the folders/drive of virtual machines from the host.  I never put in place a network before first of all, I read the manual about it, but it's a little confusing. Could someone give me it please help step by step instructions. I searched the web and the info is sparse at best.

    Also, if I want to run my host on my VM thinApp. How could I get this? Could someone walk me through the steps?

    Any help would be greatly appreciated.

    No, there is no need to disable one or both of them.

    VMnet 8 is the NAT network. It is also ServerD by the DHCP server, but it has another range of IP. If you use this type for your vNIC your guest will be hidden from the outside and the host acts as a proxy and a NAT device. This means that if comments you send the packets they will appear as packets between the host and other systems. Only the replies to these packets are routed to the customer. You cannot connect to external systems prompt as it is hidden. If you need to connect to the host using NAT, you must configure the VMware NAT service to redirect specific to the guest ports. Port 80 for a Web server on the client, for example.

    If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

  • Check Point virtual network adapter for SSL Network Extender

    I just downloaded an update recommended for Windows 10. After updating downlaoded, whenever I start my computer it say compatibility assistant this app is not working properly try to reinstall Check Point virtual network adapter for SSL Network Extender. Why do I get this notice? I have no problem getting on the internet. I have a modem and a router that work well with all my devices. I use an ethernet cable, nothing has changed in addition to the recommended update.

    I thought I would try devices and adapters Manager double click Network and looked for updates. Updated and now I don't get notification any longer.

  • How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

    How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

    I have a virtual network adapter that is created with Broadcom.

    This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

    This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

    Someone has an idea?

    Thank you

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

    I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

    I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

    The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

    You have a router/network to connect to and a cable network to connect with?

    Look at the 'Network option' part of the poster:
    http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

  • Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

    Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

    Hello

    Try the methods below to solve the problem.

    Method 1:

    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357

    Method 2:

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

    http://support.Microsoft.com/kb/811259

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

  • Lack of EAP = PEAP (Protected EAP) in windows xp sp3 trying to create virtual network tomy office.

    I'm trying to create the virtual network in my office and the dropdown under the security of network connections authenticatication tab the list drop-down option to authenticate "= Protected EAP (PEAP) EAP is missing. I need to select this option to connect to my office according to the documentation provided by them.

    I m in a situation where I need to connect and work. Office staff not support this problem because it is my laptop at home.

    If please suggestions for install or upgrade or solutions to this would be greatly appreciated.

    Thanks in advance.

    Regads venzy

    Hate to tell you but PEAP is not supported by nature in windows XP. You must purchase and install a version of 3rd party drivers.

Maybe you are looking for

  • during writing net bios password

    Could someone help me please.  I forgot my password of netbios.  After 3 wrong attempts to get a key to disable system of: 54919682.  I am running windows 7.  I'm at my wits end.  Any help would be appreciated. Thank you

  • Boot from usb pendrive on Qosmio G20

    Hi, my name is Gregorio, I have a toshiba qosmio G20, and I would like to know how to start via USB pendrive which I installed a linux operating system, but I can't be able to run it. I m trying to do that, because I Don t know how to create a partit

  • Satellite Pro A120 frozen until Vista Runing mainly

    Hello, all the Am a new user of Satellite A120 a few months...It worked great for a few months, but now it freezes just upward while I work... Frostbite and processor system starts to make noise (ATMOSPHERIC pressure)I have reinstall the entire opera

  • In blackberry 10 Android code reuse

    Hi all, Now we have google App android app, our customer want to publish the application balckberry also, we want to know is possible to reuse the existing blackberry 10 android source code? Note: I ask all the apk to the conversion bar Thank you & b

  • using the command key

    Why when I hold down the CTRL key to select more images the computer made a copy of these images in the same file?