Unable to print automatically trays (LJ600)

Similar Questions

• HP Officejet Pro 8620: Selection easy printing on tray 1 or 2

  We have an Officejet Pro 8620 with extra paper tray. Tray 1 for Virgin paper, tray 2 for the paper with the logo of the company.

  Now, when we want to print to tray 2, we reject Tray 1, whereas, after a few attempts the software switches to tray 2 and printing begins.

  It is possible, before printing, to change the setting in the software, select printing for tray 2. But it's pretty heavy.

  We want an easy way to select printing for Tray 1 or the tiroir2. For example, as seen in other environments, so that we can choose to print on:

  -HP Officejet Pro 8620 (Tray 1) or

  -HP Officejet Pro 8620 (tray 2)

  This could be seen as a separate printers. How can we achieve this?

  Change the setting every time, is not a good option. In addition, we have other software that we want to configure so that they automatically print to the correct bin.

  Thank you!

  Hello @Sing020,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of two copies of your HP Officejet Pro 8620 e-all-in-one printer to your Windows 7 computer to make impression on tray 1 and 2 of the State Bar an easier process for you. Can I please you follow the steps below.

  1. click on the Start menu

  2. Select devices and printers

  3. in the devices folder and printers, you should see your printer HP Officejet 8620 installation

  • Before you continue, we must determine how your printer is connected. If you have a printer Wireless HP Officejet 8620, on the front panel of your printer, tap the Setup button.  Select Network Configuration. Select the wireless settings. Touch Wireless details. Make a note of the IP address.
  • If you have the cable plugged USB printer please right click on the HP Officejet 8620 under the printers and devices folder and click on printer properties. Click the Ports Look under the list of Ports for the port selected for your printer. There should be a check mark next to one of the USB ports. If you move your mouse over the Port is expected to show you the full name (USB 0001, 0002 USB, USB 0003, etc.). Note the number of USB Port.

  4. then right click on the HP Officejet 8620 which shows currently installed on your computer. Left click on Printing Preferences.

  5. on the paper/quality tab, select the paper sizeand tray (Tray 1) .

  6. click on apply and OK

  7. right click on the HP Officejet 8620 last once and click on Printing Preferences. On the general tab, you should be able to add (Tray 1) at the end of the name of your printer.

  8. click apply and then OK to save the changes.

  9. now, must be added in the second copy of your printer. Please close devices and printers for a moment.

  10. click on the Start menu

  11. in "search programs and files" box located just above start type % temp % and press enter on your keyboard

  12. when the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  13. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  14. close the Temp folder when it is empty

  15. right-click the recycling bin on your desktop and select empty recycling bin

  16. click here to download the driver Officejet 8620

  17. when the download is complete extraction will occur and may open an install window. If an installation window opens, Please close it.

  18. click on the Start menu

  19. in the box "search programs and files" type folder and press enter

  20. when the Temp folder opens, find the file 7z. Click once 7z folder to open it , it

  21. at the top of the page, you will see the path to the file. It should show something like: Local C - users - AppData - Local - Temp-7z drive... Left click on the right side of this bar of the file path. All that will now highlight in the path of the file. Right-click on the path of the file to highlight then copy it.

  22. close the Temp folder

  23. click on the Start menu

  24 click on devices and printers

  25 click on Add a printer in the top

  26. click Add a local printer and click Next

  27. click on use an existing Port. Click the menu drop down and choose the exact same port that your HP's Officejet 8620 at current address is installed on. Press Next.

  28. If you are brought to a list of manufacturers and Printers, click disk , at the bottom right. Right click on the bar of path of file in the window "install from disk" and "Paste" in the path of the file we copied previously

  29 press on Next to complete the process of adding

  30. Once you are taken back to the devices window and normal printers, you should see two copies of your installed HP Officejet. If you see only a single copy, your computer can be grouped under the same icon. Make a right click on the HP Officejet see you and now need arrows next to the options (options print, the print properties, etc.). If you click on the arrows, you will see two copies of your printer.

  

  31. right click on the HP Officejet 8620 we set up for tray 2

  32. left click on Printing Preferences

  33. click the paper/quality tab

  34 select the paper in tray 2 trayand set the paper size

  35. click on apply and OK

  36. you can right click on your HP Officejet one more time and select printer properties.

  37. rename this copy to HP Officejet 8620 (tray 2)

  38. click on apply and OK

  Now when you try to print, when you select the file and print , you'll see a Tray 1 and a copy of your HP Officejet tray 2 . Simply choose the copy that corresponds to the status bar you want to print from.

  Please let me know if the steps I have provided to resolve your problem. It may seem like there are a lot of steps, but it's really an easy process. I wanted to give you as much detail as possible for scenarios that may occur. Good luck!

• 477dw Pagewide Pro MFP: MFP Pro Pagewide 477dw tries to print to tray 2 documents and envelopes for Tray1 in word 2010

  Set up the new printer and printing from Word 2010
  Printing documents to default tray 2 works fine, but when you try to print an envelope in Tray 1 it always says that we must put the envelopes in tray 2 even if in the shortcuts in printing preferences, we have selected 1, tray with envelopes, for this document.
  Also tried auto select paper source and no change.

  What would be ideal, that's what we had with our old HP printer where you click on print and it went to the default (tray 2) Letter/A4 paper tray, but if you put something in the manual feeder (Tray 1) it would print automatically on this site until he missed and then switch back to the main tray (tray 2).

  Pulling my hair out over the new printer so any help would be greatly appreciated.

  BTW.
  Tried to file a case of pension, put in the serial number and it says this product not supported by this site, click here to go to HP enterprise.  Tried to submit a case of pension to enterpise and got the same message pointing me back the first page, so just round in circles, I can still apply for assistance.

  Hello

  I understand that you are having trouble with printing to different trays on a PageWide Pro printer. I want to help you with this. There are two pieces to this puzzle - the printer settings & settings on the computer (in an additional post, I'll add more details)

  PageWide Pro has the ability to support your ideal scenario.

  What would be ideal is what we had with our old HP printer where you hit print and it went to the default letter/A4 paper tray (tray 2)  but if you put something in the manual feed (tray 1) it would print automatically on that instead until it ran out and then switch back to the main tray (tray 2).
  

  The printer settings

  • Tray 1 set to any size and any Type
  • Configure tray 2 (+ other trays) to the paper size and type in the status bar
    • Configure the status bar by opening / closing the tray and using the size/Type prompt - provided it clears any existing stored measured value.
  • Manual feed set to OFF (manual feed replaces the Printer Auto Select Paper Source setting) (not a factor based on your description)

  Driver settings

  • The important thing is that your print job is sent using the configuration of driver Paper Source>printer Auto Select.
  • Make sure that paper in the word document settings match the status bar settings previously configured on the printer

  At the beginning of the print job, if the media is present in the Tray 1 (Any/Any value) and the print job is sent "Printer Auto Select", tray 1 we'll pick first until the media runs. (The printer will assume that you have placed media in Tray 1 which corresponds to printing)

  However, if the media is placed in the Tray 1 in the middle of a printer Auto Select print job, media will be very probably not selected. It is important to maintain the consistency of the size of the print media & type.

  Kind regards

  Jay

• Unable to print on a HP printer, documents stuck in the queue

  OK, so I have a HP Deskjet 1000 printer. And I am trying to print a Word from my other computer document, but it does not work. I checked the "see what's printing' for this printer on the computer on which I wanted to print from, and it shows a bunch of documents in the print queue. I tried to cancel or restart them, but nothing happens. I just get "error processing command." I already checked the C:\Windows\System32\Spool\PRINTERS, but there nothing in it. I already deleted the printer and re-inserted and you download the drivers again. Unable to print all right, but I still have computers (I have two). On the computer where the printer is, if I try to print something, nothing happens, no documents in its queue. But the other computer, it just keeps adding more documents in the queue and I can't do anything. I use Windows 7 Home Premium on two of them.

  Edit 1: I was able to successfully complete the queue from here: http://www.online-tech-tips.com/computer-tips/how-

  But now the problem is when I go to MS Word and go to file > print, it says ' Paper Out: 1 document waiting '. I wonder if this is what is causing the problem. I use a HP Deskjet 1000. And then if I try to print something from the computer with the printer, the print job will appear and then disappear quickly.

  Edit 2: Ok, I've solved this by removing the printer from devices and printers. When I added this return, he installed a driver that wasn't there and ended. Then I tried to print something and he actually got the print job. Now the question is when I push the power button and ensuring that it catches the paper, it is not actually print out what I wanted to print. Also, I am trying to install the drivers for the printer, and it says "plug the square end of the USB cable to the back of the printer and the flat end of the cable to a USB port available on this computer. Well, I connected physically, but it's not detect it. The drivers are for Deskjet 1000 J110.

  Hi rumpled103

  Step 1 - Microsoft Support

  1. The following link will help you.
  2. Link 1: Microsoft - Support "diagnose and automatically fix problems printing and printer"
  3. Link 2: Microsoft - Support "solve printer problems"
  4. Download & install fixit and follow the instructions.

  Step 2 - OEM Support

  1. Link to the HP Support page will help you.
  2. Link 1: HP Support - 'Print a Test Page - HP Deskjet 3000 printer learn how to print a test page from the printer HP Deskjet 3000 J310A-, 2000 (J210A), or 1000 (J110A)'
  3. Link 2: HP Support - "automatically resolve problems printing and scanning with the HP print and scan the doctor"
  4. Source: HP Support - "HP Deskjet 1000 printer"

  Note: Please let us know

  1. Please let us know if the problem is solved or not. Please do not hesitate to communicate in response if you need assistance

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• printer officejet 4650: unable to print emails

  When I tried to print emails yahoo, gmail and smartermail, the message asked me to 'save' and I can't find the button to print. Help, please. Thank you.

  Hi @WilliamLi,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print from your email to your HP Officejet 4650 printer accounts. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Gmail, Yahoo, and SmarterMail are web-based email clients which means that they are using a Web browser.

  It seems that the printer is not selected in the print dialog box. Please ensure that you select your printer. Otherwise, it could use a PDF or Microsoft OneNote Driver, printer etc.

  Are you able to print from MS Word, Notepad, or WordPad?

  In the meantime, I would reset the settings of your browser to see if that solves the problem.

  Reset the settings of your Internet Explorer browser

  1. Close all Internet Explorer Windows or Explorer Windows that are currently open.

  2. Open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then in the list of results, click Internet Explorer.

  3. Click Tools and then click Internet Options.

  4. Click on the Advanced tab, and then click Reset.

  5. Select the check box delete personal settings if you want to delete the browsing history, search providers, accelerators, home pages, and InPrivate filtering data.

  6. In the reset Internet Explorer settings dialog, click Reset.

  7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.

  8. Close Internet Explorer.

  Source

  Reset the settings of your Firefox browser

  1. Type Subject: config in the address bar and press ENTER. A list of preferences appears.

  2. Find the preference Print.print_printer (Note: this preference is missing in Firefox profiles where you have never used the printer.)

  3. (Right-click contextual) right-click the preference and select Reset . (Some users may need to reset all the ) ( Print.Printer preferences for a particular printer, if this master preference reset does not solve the problem.)

  4. Restart Firefox and see if the problem is resolved.

  Source

  Reset your Google Chrome browser settings

  1. In the upper right corner of the browser window, click on the menu of the Chrome Chrome

  2. Select settings.

  3. At the bottom, click Show advanced settings.

  4. Under the section "Reset settings", click on reset.

  5. In the dialog box that appears, click Reset.

  Source

  I hope this helps. Please reply to this message with the results. I wish you a nice day!

• HP Officejet Pro 8600: Printing from tray 2 Hp8600

  I recently bought a 3 microsoft surface, and for some reason when I go to print I can no longer select tray 2, happens with tray 1. I have tried a number of things, looked at preferences and even followed the steps in this post http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/Easy-selection-printing-to-tray-1-or-2/td-... all the way to step 33, but the paper/quality tab is not either.

  Can anyone help?

  Hi danjambal,

  Thank you for your answer!

  The steps for Windows 8 will run on Windows 10. Please, try the following:

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. In the Printing Preferences menu, select paper/quality.

  4. In the paper Source drop-down list, select tray 2.

  5. In the paper size drop-down list, select the size of paper suitable for the print job.

  6. Click or click on apply, and then click or tap on OK.

     NOTE:

     Follow these same steps for the default print tray back to Tray 1.

  If these steps do not work, there could be a nuisance pilot. Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• Unable to print the web page - want to save the file instead!

  I'm unable to print a page of web... pop box appears, asking you to save the file. When cancelled, unknown error message appears. Other browsers ok.

  This has happened

  Don't know how many times

  is in the last week

  Make sure that your printer is selected at the top of this dialog box, and who print to file is not selected in the middle of this box.

  http://KB.mozillazine.org/Problems_printing_web_pages

• Hp6700: Unable to print from my ipad

  Recently changed internet service providers and now I am unable to print from my iPad to my wireless printer.  My iPhone works, and the computer works, but cannot print anything on my iPad.

  Hello
  
  Sorry to hear that you are experiencing printing problems.
  
  Try to restart your apple device - it's a simple solution that sometimes allows to restore the connection to the printer.
  
  Other things to check would be that there has been no recent changes to the wifi password and the password for wifi on the ipad has been updated.

• 3510e: unable to print a copy of a document placed on the screen of the printer.

  My 3510 e printer works using my computer & Iphone but I'm unable to print a copy of a document that I placed on the printer screen.

  I solved my problem by installing new ink cartridges.

• Unable to print emails because of popups blockers

  When I try to print emails, I have a message "Unable to print no doubt caused by popup blocker, try again" but still cannot print. How can I get rid of this?

  Ian,

  When you want to print, what happens when you press on and hold the Ctrl key? By pressing the Ctrl will usually allow the popup which would be blocked, to happen.

  Press in and hold the Ctrl key, then click on your was to print.

  Rick

• Unable to print using HP Officejet 4500 but the screen displays "BUSY".

  Through 'troubleshooting' and are still unable to print. The Start button flashes as usual, then nothing. BUT the screen displays "BUSY".

  OT:OfficeJet 4500

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?

  You can download the drivers for the printer based on your operating system from the link provided below.

  Software & Driver Downloads HP Officejet 4500 all-in-One printer - G510a

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

  For more information about troubleshooting steps, see:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.

• Unable to print an invoice from within a Web page.

  Original title: device error message

  Unable to print an invoice from within a Web page.

  using network printer.

  Hi ColinBall,

  1. are you able to print other Web pages and other documents?

  2. you receive messages or error codes?

  If you are facing the issue when you try to print from Internet Explorer, you can read the following article and see if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

  Hope this information is useful.

• Canon BJC-265SP, but after Setup printer, still unable to print

  I use the 64 bit and Canon BJC-265SP, window but after Setup printer, still unable to print. The installation works fine with 64 bit window.  Please advice.

  Hello

  1. What is the error message you get when you try to print?
  2. what operating system is installed on your computer?

  If you use Windows 7, check if the Canon BJC-265SP is compatible with the operating system on the Compatibility Web site (your device is however not listed).

  I suggest that you run the utility troubleshooting printer and check if that helps.

  See also: solve printer problems.

• hp5610: unable to print from the internet regardless of search engine

  I'm unable to print from the internet regardless of internet search engine. I ran the impression scanning hp doctor who shows no match port, I don't know what that means. What I've tried is; power off printer, internet modem and usb ports restarted, changed, cable and ethernet cable. This problem has been resolved before by switching engines, this has no effect now. Help

  Mikev

  Welcome to the community of HP @mikiev,

  I read your current and previous posts about how you can't print from the internet, and I wanted to answer you with my suggestions. I understand that you have tried to use different however search engines, try to return to my colleague's response @RnRMusicMan on the link below and try to use another web browser altogether. Again, if you use Google Chrome, try Firefox or Internet Explorer.

  • problems printing from the internet

  If Chrome and Firefox will not print, try printing from NotePad, which is a program that is preinstalled on your system to see if the draws work from there.

  You can also try uninstalling and reinstalling Google Chrome or Firefox, whatever one you use often, to see if that helps the printing problem.

  Let me know what is happening and we can go from there!

  Good luck