Unable to print on HP 4550n with Snow Leopard

Similar Questions

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• OfficeJet 6210 does not work with snow leopard

  My officejet 6210 worked very well on Mac OS 10.5. Now that I have snow leopard, when I try to choose my printer in system preferences, it says some software are absent, and the service program does not open. When I try, I can't print from MS Word and get the error "could not start the filter" / Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp "-operation not permitted.» Stoppage of work because the Scheduler could not run a filter".

  I installed new software/drivers on the web for Mac OS 10.6, even if the software/drivers are supposed to come with snow leopard. I tried all versions of deleting and adding the printer, restart the mac and printer, etc.

  Help! Ideas in addition to give up and go back to the old operating system or buy a new printer?

  You always had the hp for 10.5 software on your Mac.  Either uninstall or install the new software does NOT uninstall the 10.5 software correctly.

  Try this:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  If this does not work, install the wrong since the CD software (for 10.5 and earlier versions) and above of uninstall routine to run the extraordinary.

  After you get it to work, I would recommend against installing the HP software for your printer.  Scan by using the Capture of Image application into your Applications folder.

• Business Inkjet 1200D with Snow Leopard?

  Hello

  I have a HP Business Inkjet 1200D and want to update to Mac OS X Leopard 10.5.8 to 10.6 Snow Leopard. I have discovered so far this printer is not supported by the snow leopard or Gutenprint.

  Could someone please tell me if it will be released a printer for Business Inkjet 1200D driver that can be used with Snow Leopard?

  If so, can you estimate how long it will take until that this driver will be available?

  Thank you in advance!

  best regards mxFred

  If you use the Leopard 10.5 DVD and run the installation of the optional system, you can install the drivers of 10.5 HP and it worked for me. I don't know why HP says it is not compatible because my HP Business Inkjet 1200 works now fine with Snow Leopard.

  Message edited by Paul_H on 04/09/2009 03:31

• NAT with Snow Leopard issue

  For the poster who will say "Google is your friend", no it is not, or I wouldn't be here.

  I tried for a while now to solve the only problem I have with Snow Leopard Server.

  MySql has fallen lion and, apparently, no one knows how to use postgrl so I installed MySql and plundered with her for a few hours to get this working.  There were various other issues with Lion.  Finally, I went to Yosemite.  Hey Apple, where is the GUI?  Then at el Capitan and finally tried Sierra (no server app at all yet).

  For me, each 'step-up' taking things and running weaker than the last.

  Welcome to Snow Leopard.  I'll stick with it for a while to come.

  The only problem I have with Snow Leopard, it's that when it restarts, the NAT will not start upward.  Other than that, it does a magnificent job to maintain my home network.  I searched high and low for an answer without success.  A few posters who have addressed this problem specifically here never got a response.

  As this seems to be about three years or more, since this question was asked and it seems that some have migrated to the SLS, I was wondering if anyone has found a solution.

  As it is now, as soon as there is a need to reboot, I just disable the NAT service, restart and turn it back on.  In the case of a failure of current (longer than the inverter can maintain) or just a random crash, I have to kill the firewall and NAT then the configuration of the gateway of new service that requires fixing the various omissions and errors and I'm good to go again.

  Any help would be greatly appreciated.

  You have posted in the forum of Snow Leopard Client.  I ask that to move this post.  In the meantime, you can see the various forums about this trick:

  http://discussions.Apple.com/docs/doc-2463

• read the format exfat with snow leopard

  I can't read format exfat with snow leopard. I use to be able to with an easilely program found on google, but since I reinstale my Os, I can't find. Someone know where I can find it? Thank you very much

  exFAT, fat32 and ntfs are supported by Snow Leopard as reading only formats without 3rd party software.

  10.6. possible it's not like block size, trying to backup, then fitness.

  or copy the data to another device in another format.

• Cannot synchronize my mac with snow leopard 10.6 with my itunes on iphone

  I use MacBook with Snow Leopard, version 10.6 and sync to my iphone with itunes 6.

  For these last months, the computer commented that the itunes on the iphone was not updated and cannot sync.

  But the itunes on the iphone is the latest version. Is the obsolete software in my MacBook? What should I do?

  Operating system of your computer is obsolete. A device running iOS 9 requires Mac OS X 10.8.5 or newer for synchronization; a MacBook must have an identifier of model at least MacBook5, 1 to run a compatible operating system.

  (143247)

• Is updated to V1.1.00.20 D6200 firmware compatible with Snow Leopard (OS 10.6.8)?

  Before updating the firmware, is the firmware upgrade compatible with Snow Leopard (OS 10.6.8) V1.1.00.20 D620 and there are problems of people had at the time?

  We're already having routing problems (the line is ok, but wifi creates connection problems, loss of packages and huge lag) so I don't want to upgrade my computer will not be able to enter the router system, otherwise it will mess up things more far.

  Hello Shemja

  Yes, you'll be well updated the firmware, it should not affect connection to the modem.

  DarrenM

• Is CS4 after effects of Master Collection Compatible with Snow Leopard 10.6.8?

  Hello Gang

  I've seen different views on the compatibility of the products of the CS4 Suite in 10.6.8 Snow Leopard.

  Does anyone know if CS4, After Effects , of the "Master Collection" is compatible with Snow Leopard 10.6.8?

  Thank you

  Just click the link and scroll down to CS4.  It does not support 10.6.8.

• What Creative cloud compatible with Snow Leopard?

  Hello is creative cloud is compatible with Snow Leopard?

  Hello

  Please see the below Document:-system requirements | Cloud Creative

• I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service was interrupted to concentrate on other resources... uh, I bought this software and how can we now

  I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service has been discontinued for focus on other resources... uh, I bought this software and how it can now be 'gone '? Pls help - bridge is very convenient and I paid for it!

  See here:

  Deleted Adobe Bridge Home service

• CS4 compatible with snow leopard?

  Hello

  I'm a little behind the 8-ball and finally research by taking a first step to upgrade my Mac to Snow Leopard 10.5.8 to begin with, but before that I need to know if my CS4 package will work with Snow Leopard.

  Grateful for any help.

  Thank you very much

  Try http://blogs.adobe.com/jnack/files/Adobe-SnowLeopard_FAQ.pdf

• Corresponding printer does not not under Snow Leopard

  Matches the corresponding printer does not not under Snow Leopard, printers appear in the windows and by default, but when you print you get pages and pages of error messages.

  I tried to print the word "test" in Notepad, you press on print, cancel the printer after seven error pages and random characters, I could even begin to reproduce it for you.

  Tried on my Unibody Macbook and iMac, same result.

  VMWare Fusion 2.05, Windows XP Pro SP3

  ratkat, I see a lot of ugliness in your papers...

  2009-08-29 10:45:22 no printer not configured or not available

  As well as many errors which look like: < error >: CGBitmapContextCreate: not supported combination of parameters: 8 integer

  I would try to uninstall merge, restart and then reinstall Fusion, restart and test from there.

  The only thing I noticed about snow leopard updates is an occasional permission problem, so this could be a sign of this.

• Unable to print black and white with an empty cartridge

  My printer will not print not black-and-white, except when a color cartridge is replaced empty.

  How can I print black with an empty color in place cartridge?

  Some IIC (individual ink cartridge) printers have print heads that require ink available for periodic maintenance tasks. This avoids problems with hooves in the print head and the bad print quality. The following printers are unable to print when a cartridge is empty, even if the other cartridges.

  

  If one or more color ink cartridges are low but not empty and you want to minimize the use of color ink, you can change the settings in the HP software to print in black ink only (grey levels). Even if you change the print settings to print in black ink only, the other ink cartridges still have ink in them so that the printer to print.

  If you choose to print in black ink only, the printer always uses small amounts of ink from all cartridges for occasional maintenance tasks. HP recommends to replace the low ink cartridges in order to avoid any interruption in printing.

  

  For more details, see the link below

  http://support.HP.com/us-en/document/c04331666

• OfficeJet J4550 with Snow Leopard - printer does not

  I have recently upgraded to Snow Leopard, and had trouble with scanning on my officejet J4550 until I read the posts on this forum, downloaded the recent update and learned to go to preview or Capture images. Now I can scan, but I cannot print. After sending a job to print, the print queue indicates that the status is "completed" - but the work has never been printed. What should I do?

  Reload the ' bad software (which for pre - 10.6), then uninstall it by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.