Exception in thread when run the project

Similar Questions

• File not found - when you try to run the project

  I get the following when I try to run the project.  You know a solution to this?  I think from scratch and cut and paste all my code in different applications, components and scripts etc.  Thank you.

  

  I tried on my system, I changed the file to the file .htm .html and discovered that the url must be correctly pointing to the location of the file.  I think that

  the file:/k:dev line is wrong in the run configuration, it must be simple k:\... something in the run configuration.

  

  Also, can you show me your run dialog box - config? as a screenshot?

• HPC for Excel - get the exception when running the diagnostics

  I was wondering if anyone would be able to provide assistance with the issue I am dealing with the help of HPC (2012 R2) for Excel (2016).

  I started a new Setup and all made in the paper, as shown here on the Microsoft Web site: start with HPC server (this site is not allow me to paste the link here). I have a test cluster consisting of 1 head node, 1 compute node. The domain controller is on a separate server. All have Windows Server 2012 R2 64-bit installed and installed using the deployment of Excel 2016 32-bit Office tool. I have installed HPC Pack 2012 R2 Update 3 on the head node and compute node. The problem is when I run the Test of the Excel of Diagnostics of HPC Cluster Manager Configuration, the test fails for the two nodes (i.e. the head and calculation). For the head node, I get an exception with a long error message that ends with some problem with "ExcelClient.Dispose". On the compute node, the error is that she could not invoke service 'Excel '.

  I think I have done everything exactly according to the instructions and followed other steps that have helped me in a successful test deployment. Any help to understand what I am doing wrong will be greatly appreciated!

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  It will be useful.

• LabVIEW crashes when opening the project

  Hey guys,.

  I'm running into an interesting issue where LabVIEW crashes when you open a project. This is the second time I encountered this problem on the same project. To get around it the first time, I simply deleted and remade my project, but since it happened again, I need to find a way to debug it. The symptom is that LabVIEW will crash at the opening of the project (sometimes I can see the screen "loading the vi") with no indication that the accident occurred. It does not even launch the reporter of the error, the process just dies. Anyone know how I can go about debugging it?

  xkenneth86,

  What version of LabVIEW? Have you had previous versions of LabVIEW on your computer? You can attach a screenshot of the accident?

• Running a Seq file when running the GUI (command line option) return an error

  Hello

  I use a LabVIEW based UI to run/execute a file in sequence by using the command line option. My command line is "Test DUT' D:\QF\GUI-test-Sequential.seq D:\QF\GUI-Test.exe - runEntryPoint

  When I ran the get 3 popup saying that some of the perameters 'is not a valid file of LabVIEW"(see attachments). No idea how to avoid these messages? (The user interface works very well and runs the entrypoint of the USE Test)

  LabVIEW 8.5

  TestStand 4.1

  Thank you.

  Hi Tom,

  When you create a new application to your specification to Build, you must set the 'Pass all arguments for application command line' in the Advanced tab.

  Once you do that it should all work.

  Concerning

  Ray Farmer

• Error when running the report EN

  I created a financial report for the HFM application, but when I try to run the same it gives error dirver ADM.
  
  I even restart all services. But the same error.
  
  Any help will be appreciated

  This error is not related to the Services. Is that you installed the HFM client on server EN? Customer HFM automatically installs the driver required for the EN to connect to HFM.

  Varun

• Error of business rule when running the command line

  Hello
  
  I get following error when you try to run the business rule from the cmd prompt.
  
  C:\Hyperion\AnalyticAdministrationServices\console\bin > CmdLnLauncher.bat - Sservername - Uusername - Ppassword - rBRname
  The HBR logging configuration file:...... \HBRClient.properties
  Input method: com.hyperion.hbr.api.RuleManagerClient: getPromptVariablesForE
  says > to 1254147029953
  Input method: com.hyperion.hbr.api.RuleManagerClient: getPromptVariablesForE
  says > 06:10:29
  Output method: com.hyperion.hbr.api.RuleManagerClient: getPromptVariablesForEd
  It > at 06:10:30
  Duration: 125 millis for performance com.hyperion.hbr.api.RuleManagerClient: getPrompt
  VariablesForEdit
  Connect the missing channel or has an invalid format. Please specify a valid connection
  string value (Server/App/DB) for the launch.
  2009-09-28 06:10:30, 203 FATAL main com.hyperion.hbr.cmdlnlauncher.LaunchManager
  -Connect string is missing or has an invalid format. Please specify a valid connection
  value of string (Server/App/DB) t for the launch.
  
  This is the format that is given in the administration of BR. guide Could you please tell me where I'm wrong?
  
  Thank you
  Agnes

  Hello

  Here is an example of the use of the launcher command line > CmdLnLauncher.exe trade rules

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• NEITHER 9481 relay are not locked when running the labview compiled exe on a computer with only installed labview execution?

  I recently bought a cDAQ-9172 with several modules.  One of the modules is a NI 9481 relay module.  I created an application using Labview and built an exe file.  If I run the exe on the computer, it was developed on the relays work properly, that is, they remain locked up until their status is changed.  If I run the same exe on a computer with only the Labview runtime installed (no software installed), the pulse relay contacts and not locked.  I'm using Labview version 7.1 for my development and execution.  Everyone knows about this problem?

  Ignore this announcement, the error stems from a difference between each computer ini-files and has nothing to do with the Labview Labview runtime vs, my bad developer.

• Error when running the app studio Site

  To create a Site Studio application, I followed the tutorial below
  
  http://docs.Oracle.com/CD/E14571_01/ doc.1111 /e13650/ssxa_creatingsites.htm
  
  But during the execution of the startSiteStudioDemo.jspx, I got the following error
  
  oracle.stellent.wcm.client.ApplicationException: no matches not found for model name '@ssd-home-pt.
  
  Could someone please advise on this?
  
  Thank you and best regards,
  Vishnu

  Check if you have saved the file /wcm/templates/page/home.jspx as a SSXA page template:

  1) navigate to the file /wcm/templates/page/home.jspx in the project in JDeveloper hierarhy.
  (2) right click on the file and open the submenu "Site Studio" from the context menu;
  (3) if the menu item "Save the Site file" is enabled, then you have not saved it. Menu start this menu item and move forward toward the front in order to save it.

  Tip: If you are already registered to it, then you should see the text [ssd-home-pt] next to the file name. (Check if you have specified the good id, for example the ssd-home-pt). You can check the recording in the /WEB-INF/wcm-config.xml descriptor. Open this descriptor and go in ' Mappings / Page Templates.

  Dimitar

• Illegal state Exception when running the code at startup

  Here's my main method:

      public static void main(String[] args)
      {
          if (args.length == 1 && args[0].equals("startup"))
          {
              Criteria locationCriteria = new Criteria();
              locationCriteria.setCostAllowed(false);
              LocationProvider mlocationProvider;
              Location mLocation = null;
              try
              {
                  mlocationProvider = LocationProvider
                          .getInstance(locationCriteria);
                  mLocation = mlocationProvider.getLocation(-1);
              }
              catch (LocationException e) {
              }
              catch (InterruptedException e) {
              }
              QualifiedCoordinates mQC = mLocation.getQualifiedCoordinates();
          }
          else
          {
              MyApp theApp = new MyApp();
              theApp.enterEventDispatcher();
          }
      }
  

  The method

   mlocationProvider = LocationProvider.getInstance(locationCriteria); 
  

  throws the illegal state exception

  When I check the debug information, I found this exception are thrown to the line when he calls Application.getApplication ();

  When I move this code to run in a normal life to screen it works fine. !

  Any help?

  There may be a number of issues here:

  (1) until your Application is actually running, you can't really do any processing.  Your Application does not start running until you

  'enterEventDispatcher() '.

  Hand, all you should do is instantiate your Application.  Manufacturer of your Application should not do anything complicated either, since it works as part of main().

  You can do some activities, for example to add listeners, in main() code that is, in some respects, unfortunate because it lulls people into thinking they can do anything.  ,

  (2) get the location as you do, is a blocking call.  If you need to do it on a background Thread.  You c a get away with that on the Simulator because GPS simulated returns immediately with a location.  So it does not actually block.  But on a real device, code as you can force your application to break.

  (3) you seem to try to do something in the commissioning.  You must be aware, this start-up up is called as part of the start-up of the device and before the unit is fully active.  In fact, I think on a real device that this code will fail because the device is not ready to provide a location in the beginning upward.

  You will find find article, informative and useful for (1) and (3).

  http://supportforums.BlackBerry.com/T5/Java-development/write-safe-initialization-code/Ta-p/444795

  I suspect you want to start and get a location at first upward, in which case you might find this useful:

  http://supportforums.BlackBerry.com/T5/Java-development/create-a-background-application/Ta-p/445226

• Exception when running the application deployed on WLS

  Hello everyone.
  
  I developed an application. When I ran the JDeveloper (jspx page) application, it worked very well. Now, I have another instance WLS in my pc (new_domain). When I deploy my application in this area and of the race, I am getting following error.
  
  java.security.PrivilegedActionException: weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: no entry credential Mapper found for user password indirection = shipping_assignment for the data source Connection1
  
  Should I change to anything\?

  Hello

  Check out this thread.

  What does this message mean?

  Arun-

• Run the project to the power vi upward

  Is it possible to open and run a VI project when a computer is turned on?  It is a Win XP SP3 computer and I use LV 2012SP1 F5.

  Sure.  Build it as an executable file and place it in the startup folder that Windows uses.

  Bob Schor

• Impossible to compile and run the project

  Hello

  Last night, my project ran and deployed to the alpha of dev without problem.

  This morning (and the only thing I've done is changed my icon and splash screen) it just sits there at 91%. When you look at the progress window there are two progress bars:

  1 says Syncing and application startup

  2 said launch myapp (blocked: user operation is pending of "" to complete).

  This eventually give up and display a dialog window:

  There is problem

  Synchronization and application startup

  Deployment failed: Info: request shipment: install and launch

  News: Native on debugging

  Information: size of the 648916759 file

  Info: installation

  Info: Treatment 648916759 bytes

  News: Progress 0%...

  News: Advance 4%...

  Info: 99% progress

  actual_id:

  actual_version:

  result: failure 812/var/tmp/cgic247239: duplicate member name ' native/MyAppName '.

  It's that last line that concerns me.

  Any ideas what is happening?  My other projects compile and deployment very well.  I tried to use the device-debug and release.  I rebooted the PC and dev alpha and even delete the running configs so that they recreated

  Thank you very much

  After more digging, I came across http://supportforums.blackberry.com/t5/Cascades-Development/App-Wont-Launch/m-p/1955639/highlight/tr...

  I also tried to create a new project, but the problem persisted. But what it show me was a warning in the bar file descripter.  The assets he suggested I had a duplicate png file.  The assets tab listed my assets folder (where the image was in fact), but it was also alongside icon.png.  So I removed that in the list and hey presto - all is well again.

• Exception code: 0xc0000094 when installing the drivers for HP Deskjet F4580.

  I'm trying to get the drivers for a HP Deskjet F4580, but after extraction, nothing happens. I checked the eventvwr to find that he had failed with:

  Name of the failing application: Setup.exe_HP Installer, version: 14.0.301.0, time stamp: 0x4b614229

  The failed module name: Setup.exe, version: 14.0.301.0, time stamp: 0x4b614229

  Exception code: 0xc0000094

  Offset: 0x00098e1b

  ID of the process failing: 0xf80

  Start time of application vulnerabilities: 0x01cf9569046040e4

  The failing application path: C:\Users\Mike\AppData\Local\Temp\7zS401B\Setup.exe

  Path of the failing module: C:\Users\Mike\AppData\Local\Temp\7zS401B\Setup.exe

  Report ID: 43cc4e77-015c-11e4-9691-f82fa8ab9bb0

  There is another error, but I need to get back on the laptop which is an APPCRASH error. I will update this post when I get it.

  I have connected it to the HP forum but I get no answer so im hoping someone here can help.

  This is the post that I opened with CV: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/DeskJet-F4580-Install-Fails-0xc0000094/td-p/4098442

  Here's what I've tried:

  I tried:

  (1) redownloading bribery - based and full

  (2) in the course of running as an administrator and as an account newly created

  (3) by disabling everything in msconfig and run Setup again

  (4) download drivers of windows 8 (starts but obviously cannot install due to the verification of the os)

  (5) I tried the patch AMD c50, but this did not help

  (6) disabling anti virus

  (7) install another printer that works very well

  (8) install locally and by selecting just the driver (don't do not settle but fails to print)

  (9) I tried the different L4, L3 etc uninstalls even if I can't install

  (10) he is stright to a new installation of the OS

  (11) I tried to mix the files between win7 and win8 drivers if I use the win8 setup.exe I get setup to start but then each hp * .exe fails with the same Exception code: 0xc0000094

  (12) I uninstalled .net and reinstalled from 3.5, 4, 4.5

  (13) uninstall IE back to IE 8

  (14) flash suppression and relocation

  (15) tweaking.com tool used to check the permissions of files and the registry etc.

  (16) completely patch windows

  Specifications of the computer:

  Acer Aspire V5 - 122P

  CPU: AMD

  OS: Windows 7 x 64

  Hi Chris,

  As this question is on an Acer Aspire computer, you can also contact Acer support.

  Contact Acer: http://www.acer.co.in/ac/en/IN/content/service-contact

  In addition, you can also ask your question here: http://acer-in.custhelp.com/app/ask/session/L3RpbWUvMTQwNjM1ODYzMC9zaWQvKmRFcWxlLWw%3D

  Thank you.

• Bex problem when running the Illusion of power

  I installed a graphics program called Illusion of power and when it runs I get the problem "has stopped working", with the following report:

  Signature of the problem:
  Problem event name: BEX
  Application name: power Illusion DEMO.exe
  Application version: 1.97.0.0
  Application timestamp: 466838e8
  Fault Module name: StackHash_e98d
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 00000000
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 2057
  Additional information 1: e98d
  More information 2: e98dfca8bcf81bc1740adb135579ad53
  3 more information: 6eab
  Additional information 4: 6eabdd9e0dc94904be3b39a1c0583635

  This is the full version, but I also tried installing their demo version and still get the same error.

  I also tried running it in a virtual machine under Windows XP on the same computer and works very well there.

  I have an i7 920, 16 GB of RAM, NVidia GTX470, Windows 7 Ultimate 64-bit.

  I'd appreciate any help to solve the problem or idea on what exactly is causing this problem.

  Hello

  I'm offering please contact the manufacturer of the software on this problem.

  There might be some particular software chance is not compatible with Windows 7.