Unable to services start Hyperion EPM architect

Similar Questions

• Not able to start my Hyperion EPM architect-Process Manager it is very urgent

  Hi gurus,
  
  I have correctly installed, configured Essbase & planning 11.1.1.3 howerver, every time I try to start hyperion EPM architect - process of eating its gives me an error like "the architect Hyperion EPM - Process Manager service on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, newspaper service and performance alerts. Note: I installed the essbase and planning in the E: drive. I installed the software in windows xp (Service pack 2)
  
  
  
  I have recongifured EPMA several times but the same error.
  
  When I try to login directly in EPMA (http://localhost:19091/awb) its throwing me an error when loading the awb.appcontainer module has failed.
  
  
  When I check the viewer where I get the message below.
  
  
  Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Failed to initialize the Session Manager. ---> System.Exception: System.Data.OracleClient requires software customer Oracle version 8.1.7 or higher.
  at System.Data.OracleClient.OCI.DetermineClientVersion)
  at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction (String userName, String password, String serverName, Boolean integratedSecurity, unicode Boolean, Boolean omitOracleConnectionName)
  to System.Data.OracleClient.OracleInternalConnection... ctor (OracleConnectionString, connectionOptions)
  at System.Data.OracleClient.OracleConnectionFactory.CreateConnection (DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
  at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection (DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
  at System.Data.ProviderBase.DbConnectionPool.CreateObject (DbConnection owningOb...
  
  For more information, see Help and Support Center at
  
  
  Kindly help me what to do...

  user12209997 wrote:
  I don't think the Oralce Client is installed... Is this the problem facing...

  You must install the Oracle client then.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Could not start the process architect EMP Manager.

  I installed Hyperion 11.1.1.3 and when I try to start the process architect EMP Service Manager I get the error message below.
  
  The Hyperion EPM architect - ProcessManager service on local computer started and then stopped
  Some services stop automatically if they have no work to do, for example, performance Service logs and alerts.
  
  I also checked the event viewer and here is what is recorded in the event viewer.
  
  Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Failed to initialize the Session Manager. ---> System.InvalidOperationException: attempt to load the Oracle client libraries threw BadImageFormatException. This problem occurs when you run with the 32-bit Oracle components customer installed 64 bit mode. -> System.BadImageFormatException: an attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
  to System.Data.Common.UnsafeNativeMethods.OCILobCopy2 (svchp IntPtr, IntPtr errhp, IntPtr dst_locp, IntPtr src_locp, amount of UInt64, UInt64 dst_offset, UInt64 offset)
  at System.Data.OracleClient.OCI.DetermineClientVersion)
  -End of the exception stack trace internal-
  at System.Data.OracleClient.OCI.DetermineClientVersion)
  at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction (String userName, String password, String serverName, Boolean integratedSecurity, unicode Boolean, Boolean omitOracleConnectionName)
  ...
  
  
  
  
  I also tried to start Hyperion EPM architect - .net NYI Bridge, which I am able to boot successfully howerver when I try to start the EMP architect - Manager of process, I get the above error.
  
  I also tried to open a session directly in http://localhost:19091 / awb, and I get the error below.
  
  Failed to load the 'awb.appcontainer' Module
  
  
  Kindly help me.

  I would of thought, this tells you the problem "* this problem occurs when you run 64 bit with the 32-bit Oracle components customer installed mode."
  EPMA running in 64 bit mode and 32-bit client installed Oracle.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion EPM services take too long to start

  Hyperion 11.1.2.3

  Windows 2008 R2

  32 GB of memory on each server

  Java 1.6.35

  Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).

  Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea

  < 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:

  D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>

  < 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >

  < 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >

  < 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >

  < 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >

  < 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 12573

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storage TP 0 as CN = Entrust .net Secure Server Certification Authority

  TP-1 treatment

  Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1

  Treatment of TP 2

  TP 2 storing as authority of Certification CN = Entrust .net (2048)

  Treatment TP 3

  Storage of TP 3 in CN = GTE CyberTrust Global Root

  TP 4 of treatment

  TP 4 storing as OU = Secure Server Certification Authority

  Treatment TP 5

  TP 5 storing as UO = class public primary Certification Authority 1

  Treatment TP 6

  TP 6 by storing like UO = class public primary Certification Authority 2

  TP treatment 7

  TP 7 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage of Secret4

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret5

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret6

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret7

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 3941

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storing TP 0 as UO = class public primary Certification Authority 1

  TP-1 treatment

  Storage of TP 1 in CN = GTE CyberTrust Global Root

  Treatment of TP 2

  TP 2 by storing like UO = class public primary Certification Authority 2

  Treatment TP 3

  TP 3 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  < 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >

  < 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  Using the OraclePKI provider

  taken javax.net.ssl.TrustManagerFactory supported

  taken javax.net.ssl.KeyManagerFactory supported

  Using the OracleJSSE103 provider

  < 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16

  null

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >

  < 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >

  < 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

  Do you still have this problem after restarting the server?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hyperion EPM 11.1.2.1 Services startup sequence (order)

  Please suggest the sequence watch EMP 11.1.2.1 services. I use 'Start EMP' in all programs - EPM - Foundation services system - start EMP. But it's too late to start all services. and service of 'Reporting and analysis' a few times will not start.
  
  1 hyperion Administartion Services - Web Application
  2 hyperion CALC Manager - Web Application
  3 hyperion EPMA Data synchronizer - Web Application
  4. the EPMA Hyperion Server
  5. web layer of Hyperion EPMA - web Application
  6 hyperion Integrator ERP - Web Application
  7 hyperion Financial data quality management - Manager tasks
  8 hyperion would invite management - DME listener
  9 hyperion would invite management - management service
  10 hyperion would invite management - service Web Manager
  11 hyperion would invite Management - web Services
  12 hyperion Financial Reporting - web Application
  13 hyperion Foundation Services - managed server
  14 hyperion Integration Services
  15 hyperion Planning - Web Application
  16 hyperion provider Services - web Application
  17 hyperion statement and framework of analysis of work
  18 hyperion statement and framework of analysis of work - web Application
  19 hyperion RMI Registry
  20 hyperion studio service BPMS bpms1
  21. the Hyperion Analysis - Web Application web
  
  22 oracle process manager (EPM_epmsystem1)
  23 oracle Process Manager (ohsInstance3250625901)
  24 OracleOraDb11g_home2TNListener
  25 OracleServiceORCL
  
  Friends, I ask that you guys please suggest the sequence to look up services. You can type nubers
  EXP: 25,24,23,22, 13... etc.

  Reference: Page 284 of http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf

  HTH-
  Jasmine.

• Not able to start service of hyperion essbase

  When I start essbase services it starts successfully.
  and when iam starting admin services his starts and at the same time essbase services stops, if iam trying to start services launch his error as
  
  Pu nto start hyperion essbse services 11.1.1 - hypservice_1 on the local computer service
  Error 1067: the process is terminated unexpectedly
  
  I checked the Task Manager: no other process for essbase are running for all users.
  
  
  kindly help

  You will need to update the new password in the configurator. (Use the password more early which will save relative to the configuration of Shared Services)

  Concerning

  Celvin

  http://www.orahyplabs.com

  Please check the answers as useful/correct as appropriate

• Installing Hyperion EPM - EPMCSS-00301: user error authentication failure

  Hi, I am trying to install the Hyperion EPM system for evaluation.
  
  I downloaded all the relevant files of the delivery of Oracle for HPCM site. The details of the system are:
  MS Windows 2003 Server SP2
  Oracle Weblogic Server
  Oracle Database 11g
  Internet Explorer 7.0 browser
  
  I installed using the Oracle DB, EMP components and configured all the elements using the EMP system configurator. Everything went through fine.
  
  I have connected the database (verified by loggine in plu SQL), the listener is started, the weblogic server is (able to open the administration console), web server is started (Oracle HTTP - OHS component), and all related services are started (administrative tools). The IIS 6.0 is also enabled and works.
  
  I am using the http://servername:19000/workspace/index.jsp url and could see the home page.
  
  When I tried to connect using the user name epm_admin and the password, I get the below error:
  
  «EPMCSS-00301: unable to authenticate the user.» Invalid credentials. Enter valid credentials. URI: http://servername:19000 / work/login area
  Code: 1000
  Description: an error occurred the result from the process server. »
  
  
  Could you get it someone please let me know what could be the problem?
  I had the same problem before and that I reinstalled the entire application again. Yet, it is not resolved.
  I don't have a system administrative skills. So, if you want me to post an error log, please let me know the name and the exact path!

  epm_admin is the default for the logic of the web administrator account not EMP.
  The default administrator for EMP account is admin and the password that you entered when you set up the Foundation for example http://1.bp.blogspot.com/__2AaArK5lW8/S9XEL2qay9I/AAAAAAAACQs/Dji-umeSYeQ/s1600/16.png

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Issue from S9 Hyperion EMP architect Process Manager

  Hi all
  
  When I try to start "Hyperion S9 EMP architect Process Manager', I get the message"
  
  "Service of Hyperion S9 EMP architect Process Manager on Local computer started and then stopped". What is perhaps the reason for this?
  
  I installed this on win xp and oracle 11.
  
  Please let me know your suggestions.
  
  Thank you
  Vikash

  Hello

  Your problem is you install on XP, it's not a BONE and EPMA suported works well with it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Firewall service starts intermittently during the startup.

  Hey all,.

  I have been encountering a problem with the firewall service. It sometimes does not start when windows is started. Usually, this would not cause any problems, but it sets up and "Iron curtain" which will allow all incoming traffic (IE ping or VNC). I do a lot of business assistance level, so it starts to be a problem.
  The service starts very well if you start from services, everything works fine. But it will stop working for a period of days. I checked the other forums and tried several different patches, but is unable to isolate why his turn at random, or not.
  I increased the time to 2 minutes.
  I checked the firewall auth., its fine driver.
  I checked the "dependent" services, all are automatic and started.
  I saw that other people have had this problem, but that nobody has a solid solution for it. I am run on a machine to point of sale posiflex, but have seen others with her on the valleys, etc..
  I need to make sure that this will not be 'spread' when we deploy Win7 for several hundred other jobs in the company.
  Any help is appreciated.

  Hi Tom,

  -Is your computer connected to a network of area?

  -What security software is installed on the computer?

  A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings. Even if you think that there is nothing on your computer that interests everyone, a worm could completely disable your computer, or someone could use your computer to help spread worms or viruses to other computers without your knowledge.

  Let us try these methods.

  Method 1.

  You can run this Microsoft Fixit and check if that helps.

  Diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/

  See these articles for more information.

  Firewall: Frequently asked questions: http://windows.microsoft.com/en-us/windows7/firewall-frequently-asked-questions

  Understanding Windows Firewall settings: http://windows.microsoft.com/en-us/windows7/understanding-windows-firewall-settings

  Method 2.

  If you suspect a virus on the computer activity, and then run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  If your computer is on a domain network, you can view this issue in Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Response with the State of the question and we will be happy to offer you our help.

• Environment of Cloud Vision demonstration for Hyperion EPM SEEP

  As an Oracle partner, we have access to the ERP/CRM/HCM Demo Vision cloud environment. Can we have access to a demo Vision Hyperion EPM of Cloud environment? How can we ask about it?

  As already said ask the representative of Oracle, or register and explore the SEEP.

  http://www.Oracle.com/partners/en/products/cloud-solutions/planning-budgeting/get-started/index.html

  To create a Vision application, follow the steps, https://docs.oracle.com/cloud/latest/pbcs_common/CSPAM/ch02s01.html

  All the best.

  Kind regards

  Deker P.

• Start the EPM system

  I work in 11.1.2.1 in a distributed environment. When I click on the 'Start EPM System' shortcut in the menu programs, it starts only local services and not the services on the other two servers. I have some other problems with the environment, and I wonder if something prevents all services in the distributed environment to start.
  
  So I guess the question is: is this shortcut to start all services in a distributed environment? In other environments for the same customer, seems to be the case.
  
  Thanks for your time.

  He will begin the EPM service on the machine, it runs, if you want to start the services on multiple computers, you can develop your own scripts.

  Documentation
  "Running the unique on a computer startup script in your system deployment EPM starts all EPM system services installed on this computer."

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot connect to the database Oracle Hyperion EPM 11.1.2

  Hello!
  I'm deployment Hyperion EPM 11.1.2 on a single machine with Windows 2008 R2 x 64. I created an Oracle database, and I can connect to it through SQL, so everything looks ok here. I also installed the Oracle Client for Win x 64 and ODP on my machine. The installation of Hyperion EPM also completed successfully, and then I went to set it up. I have entered the database connection information:
  
  Driver database: Oracle (thin)
  Server: the IP address of the machine >
  Port: 1521
  The service name or SID: < my Oracle database name >
  Username: Oracle user with the role of s/n >
  Password: < password of the Oracle user >
  
  And then I click on 'Next' and I get the error message: + "" i/o error: the network adapter could not establish the connection "+"
  
  I would point out that I also had a problem connecting to the Oracle SQL Plus error first database: "ORA - 12560:TNS:protocol adapter error. But after the creation of the ORACLE_SID environment variable by assigning the name of the database, this error disappeared.
  
  Please help with any advice on what could be bad! Thank you!

  If you use 'localhost' or 127.0.0.1 during the configuration of the database not the real IP address

• laptop does not recognize the phone samsung S3 31 error: the Service starts

  Original title: error 31: Service starts
  I'm trying to get my laptop to recognize my phone of samsung S3.  I downloaded ' Microsoft_User-Mode_Driver_Framework_Install - v1.0 - WinXP.exe'... this driver is needed to get my laptop to recognize my phone. but, the service of this driver does not start... How can I get this service to start?

  Hello

  If resetting the phone does not help then you can contact samsung support.
  http://www.Samsung.com/SG/support/main/supportMain.do

• How define the process OBIEE BI Services as Windows Service start?

  Hi gurus,

  I just installed 11.1.1.7.0 on a Windows 2008 R2 server OBIEE, and after the installation process is complete, he created two icons: start the BI Services and stop the BI Services.

  The BI Services starts when I double click to start the Services of BI, but if I connect to the server, the BI Services goes down. So, how can I put this process as a Windows Service not to fall whenever I disconnect the server?

  Is there any blog or documentation explaining?

  Thanks in advance

  concerning

  Search for Xmx in this link, you get what files should change.

• SRM 5.8 service starts and stops

  Hi all

  I have a problem with MRS. At the beginning, I have 2 vCenters, in bound mode, with the default installation of MRS. (1:1). Now, after a long time, one of the two sites of this will not start the service. MRS. service starts and stops after a minute.

  In the paper, I see a lot of these:

  015 01-20 T 13: 30:53.532 + 01:00 [10772 connID wordy of 'QsServerSingletonCache' e09c =] Dr::QsServerSingletonCache:SetContext: context and broadcasting

  2015 01-20 T 13: 30:53.534 + 01:00 [03592 WARNING connID 'QsClient' = e09c] had wrong answer. Code: 400, Message: Bad Request

  2015 01-20 T 13: 30:53.534 + 01:00 [03592 WARNING "Default" connID = e09c] closing of transformation in unexpected state response: 3

  2015 01-20 T 13: 30:53.535 + 01:00 [error 03592 'LocalQS' connID = e09c] Exception so that Ping Server QS

  -> Std::exception QsClient::ValidationException 'class' 'Bad Request'

  2015 01-20 T 13: 30:53.535 + 01:00 [03592 WARNING connID 'LocalQS' = e09c] Ping failed: std::exception 'class QsClient::ValidationException' "Bad Request".

  2015 01-20 T 13: 30:53.535 + 01:00 [03592 info 'QsServerSingletonCache' connID = e09c] Dr::QsServerSingletonCache:SetContext: lost connection, reset the connection context

  2015 01-20 T 13: 30:53.535 + 01:00 [connID 03592 verbose 'LocalQS' = e09c] tries to connect

  2015 01-20 T 13: 30:53.541 + 01:00 [10372 info "Default" opID = 6b661b6d] CoreDump: written minidump

  2015 01-20 T 13: 30:53.587 + 01:00 [10800 "Default" info] CoreDump: written minidump

  «"2015 01-20 T 13: 30:54.568 + 01:00 [connID 10772 verbose 'LocalQS' = e09c] connection was successful, the new session id ="»

  2015 01-20 T 13: 30:54.569 + 01:00 [connID 10772 verbose 'LocalQS' = e09c] event to VC validation: {(dr.eventEx.LocalQsConnectionUpEvent)

  -> dynamicType = < unset >

  ->}

  Any idea? I tried the dejoin and join the 2 vCenters, but nothing does not change.

  Thank you very much

  Matrix

  There's your problem:

  2015 01-20 T 13: 29:51.893 + 01:00 [10800 "Default" error] Application error:

  --> There is no valid records in QS Server for this SRM server.

  --> There is no such registered provider: "45c9c008-16be-4ab3-a346-069b57837c7e." Closing...

  This means that registration SRM in the inventory of VMware somehow Service has been lost. Did you accidentally uninstall SRM or restored vCenter sauvegardΘ or something like that?

  Can you repair the installation of SRM by going to control panel-> programs and features-> VMware vCenter Site Recovery Manager-> changes installation. You go through the wizard and vCenter administrator credentials are available.

  After this operation, you may have to reconfigure the connection between the servers through the UI SRM SRM.

  Thank you

  Stefan